Minimum lithium plating overpotential control based charging strategy for parallel battery module prevents side reactions
Source abstract
Abstract
Abstract As demands for massive energy consumption inevitably grow, lithium-ion batteries have been widely recognized as promising energy devices and fundamental components for electric vehicles or grid application. However, certain circuit configuration especially parallel connection exhibits highly heterogeneous current distributions in different branches, some of which undertakes considerable current fluctuation during charge/discharge. Therefore, a charging strategy for integrated energy storage facilities is highly desirable to avoid the side reactions like lithium plating that can cause severe degradation or even risks of thermal runaway. In this study, a parallel-module model is established based on a modified single particle model with side reactions, and experimentally validated under various C-rates. Then a minimum Li plating overpotential control (MLPOC) based charging strategy is proposed for this parallel-module model and effectiveness for reducing capacity loss is verified by module simulations under high C-rate charging. Furthermore, parameter sensitivity of resistance ratio between branch and interconnect resistances on module performance with or without MLPOC are investigated. Results show that a medium resistance ratio of 20–30 is recommended for this parallel module. The insights from this paper not only provide charging strategy with minor degradation but also guide the design of battery module for better pack charging performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Cyber hierarchy and interactive network (CHAIN)----enabling digital solution for battery full-lifespan management10.1016/j.matt.2020.04.015 ↗
2. Battery digital twins: perspectives on the fusion of models, data and artificial intelligence for smart battery management systems10.1016/j.egyai.2020.100016 ↗
3. Designed high-performance lithium-ion battery electrodes using a novel hybrid model-data driven approach10.1016/j.ensm.2021.01.007 ↗
4. Coupled thermal–electrochemical modelling of uneven heat generation in lithium-ion battery packs10.1016/j.jpowsour.2013.05.164 ↗
5. A method for the estimation of the battery pack state of charge based on in-pack cells uniformity analysis10.1016/j.apenergy.2013.08.008 ↗
6. Screening process-based modeling of the multi-cell battery string in series and parallel connections for high accuracy state-of-charge estimation10.1016/j.energy.2013.04.050 ↗
7. Cell-balancing currents in parallel strings of a battery system10.1016/j.jpowsour.2016.04.125 ↗
8. Current distribution within parallel-connected battery cells10.1016/j.jpowsour.2016.10.010 ↗
9. A LiFePO4 battery pack capacity estimation approach considering in-parallel cell safety in electric vehicles10.1016/j.apenergy.2014.12.081 ↗
10. Effects of imbalanced currents on large-format LiFePO4/graphite batteries systems connected in parallel10.1016/j.jpowsour.2016.02.087 ↗
11. On the impact of internal cross-linking and connection properties on the current distribution in lithium-ion battery modules10.1149/1945-7111/abad6b ↗
12. The effect of cell-to-cell variations and thermal gradients on the performance and degradation of lithium-ion battery packs10.1016/j.apenergy.2019.04.108 ↗
13. Lithium-ion battery fast charging: a review10.1016/j.etran.2019.100011 ↗
14. Fast charging lithium batteries: recent progress and future prospects10.1002/smll.201805389 ↗
15. Challenges and opportunities toward fast-charging of lithium-ion batteries10.1016/j.est.2020.101837 ↗
16. Electrochemical estimation and control for lithium-ion battery health-aware fast charging10.1109/TIE.2017.2772154 ↗
17. Fast charging optimization for lithium-ion batteries based on dynamic programming algorithm and electrochemical-thermal-capacity fade coupled model10.1016/j.jpowsour.2019.227015 ↗
18. Electrothermal dynamics-conscious lithium-ion battery cell-level charging management via state-monitored predictive control10.1016/j.energy.2017.09.048 ↗
19. An optimal multistage charge strategy for commercial lithium ion batteries10.1039/C8SE00235E ↗
20. Optimal charging method for lithium ion batteries using a universal voltage protocol accommodating aging10.1016/j.jpowsour.2014.10.185 ↗
21. Safety focused modeling of lithium-ion batteries: a review10.1016/j.jpowsour.2015.11.100 ↗
22. A review of modeling, acquisition, and application of lithium-ion battery impedance for onboard battery management10.1016/j.etran.2020.100093 ↗
23. Application of electrochemical impedance spectroscopy to commercial Li-ion cells: a review10.1016/j.jpowsour.2020.228742 ↗
24. Identification and machine learning prediction of knee-point and knee-onset in capacity degradation curves of lithium-ion cells10.1016/j.egyai.2020.100006 ↗
25. Data-driven prediction of battery cycle life before capacity degradation10.1038/s41560-019-0356-8 ↗
26. Degradation diagnostics for lithium ion cells10.1016/j.jpowsour.2016.12.011 ↗
27. A review on the key issues of the lithium ion battery degradation among the whole life cycle10.1016/j.etran.2019.100005 ↗
28. Thermal runaway of lithium-ion batteries without internal short circuit10.1016/j.joule.2018.06.015 ↗
29. Mitigating thermal runaway of lithium-ion batteries10.1016/j.joule.2020.02.010 ↗
30. Thermal runaway triggered by plated lithium on the anode after fast charging10.1021/acsami.9b16589 ↗
31. Li plating as unwanted side reaction in commercial Li-ion cells – a review10.1016/j.jpowsour.2018.02.063 ↗
32. Investigation of lithium plating-stripping process in Li-ion batteries at low temperature using an electrochemical model10.1149/2.0661810jes ↗
33. Drive circuitry of an electric vehicle enabling rapid heating of the battery pack at low temperatures10.1016/j.isci.2020.101921 ↗
34. Non-destructive fast charging algorithm of lithium-ion batteries based on the control-oriented electrochemical model10.1016/j.apenergy.2017.03.111 ↗
35. Asymmetric temperature modulation for extreme fast charging of lithium-ion batteries10.1016/j.joule.2019.09.021 ↗
36. Fast charging of lithium-ion batteries at all temperatures10.1073/pnas.1807115115 ↗
37. Closed-loop optimization of fast-charging protocols for batteries with machine learning10.1038/s41586-020-1994-5 ↗
38. Anode potential controlled charging prevents lithium plating10.1039/D0TA04467A ↗
39. Battery state estimation for a single particle model with electrolyte dynamics10.1109/TCST.2016.2571663 ↗
40. Algorithms for advanced battery-management systems10.1109/MCS.2010.936293 ↗
41. Development of first principles capacity fade model for Li-ion cells10.1149/1.1634273 ↗
42. Investigating lithium plating in lithium-ion batteries at low temperatures using electrochemical model with NMR assisted parameterization10.1149/2.0461706jes ↗
43. Fast charging of li-ion cells: part I. using Li/Cu reference electrodes to probe individual electrode potentials10.1149/2.0401906jes ↗
44. Errors in the reference electrode measurements in real lithium-ion batteries10.1016/j.jpowsour.2020.228933 ↗
45. Investigating electrical contact resistance losses in lithium-ion battery assemblies for hybrid and electric vehicles10.1016/j.jpowsour.2011.03.056 ↗