journal article·2021-01

High–performance protonic ceramic fuel cells with a PrBa0.5Sr0.5Co1.5Fe0.5O5+δ cathode with palladium–rich interface coating

Jong Seon Park, Hyung Jong Choi, Gwon Deok Han, Junmo Koo, Eun Heui Kang, Dong Hwan Kim, Kiho Bae, Joon Hyung Shim

Publisher page

Abstract

Abstract This study reports on protonic ceramic fuel cells (PCFCs) that exhibit enhanced performance after the addition of palladium (Pd) interlayers at the cathode–electrode interface. The Pd interlayer is deposited by sputtering on the BaZr0.2Ce0.6Y0.1Yb0.1O3-δ (BZCYYb) electrolyte surface, followed by the inkjet printing of PrBa0.5Sr0.5Co1.5Fe0.5O5+δ (PBSCF) and sintering. The proposed method successfully has produced a Pd layer that was well integrated between the BZCYYb and PBSCF layers, with no undesired reactions or phase formation. The Pd layer is diffused along the inner surface of the porous PBSCF cathode with the desired gradient composition. In our experiment, the fuel cell power is enhanced by up to 60% compared to the untreated PCFCs. In the former, the peak power density of the optimal cell is 420 mW cm−2, while that of the untreated sample is 260 mW cm−2 at 500 °C. The long-term stability of the Pd interlayer is confirmed during cell operation. The impedance analysis has revealed that the presence of the Pd significantly enhances the current collection and reduces the polarization impedance at the cathode–electrolyte interface, especially at low temperatures. These results indicate that the proposed method is promising for the fabrication of high-performance and robust PCFCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. A 5 × 5 cm2 protonic ceramic fuel cell with a power density of 1.3 W cm–2 at 600 °C10.1038/s41560-018-0230-0 ↗
2. Demonstrating the potential of yttrium-doped barium zirconate electrolyte for high-performance fuel cells10.1038/ncomms14553 ↗
3. Readily processed protonic ceramic fuel cells with high performance at low temperatures10.1126/science.aab3987 ↗
4. Exceptional power density and stability at intermediate temperatures in protonic ceramic fuel cells10.1038/s41560-017-0085-9 ↗
5. High-performance protonic ceramic fuel cells with 1 μm thick Y:Ba(Ce, Zr)O3 electrolytes10.1002/aenm.201801315 ↗
6. Electrochemical properties of BaZr0.1Ce0.7Y0.1Yb0.1O3 − δ-Nd1.95NiO4 + δ composite cathode for protonic ceramic fuel cells10.1016/j.ijhydene.2014.12.084 ↗
7. Mixed-conducting perovskites as cathode materials for protonic ceramic fuel cells: understanding the trends in proton uptake10.1002/adfm.201801241 ↗
8. Triple-conducting layered perovskites as cathode materials for proton-conducting solid oxide fuel cells10.1002/cssc.201402351 ↗
9. Performance of PrBaCo2O5+δ as a proton-conducting solid-oxide fuel cell cathode10.1021/jp9042599 ↗
10. Zr and Y co-doped perovskite as a stable, high performance cathode for solid oxide fuel cells operating below 500 °C10.1039/C6EE01915C ↗
11. The effect of heat treatment on nanoparticle size and ORR activity for carbon-supported Pd–Co alloy electrocatalysts10.1016/j.electacta.2006.09.051 ↗
12. Palladium monolayer and palladium alloy electrocatalysts for oxygen reduction10.1021/la0610553 ↗
13. A proton-injecting technique for the measurement of hydration-dependent protonic conductivity
14. Evolution of the electrochemical interface in high-temperature fuel cells and electrolysers10.1038/nenergy.2015.14 ↗
15. Catalytic effect of Pd-Ni bimetallic catalysts on high-temperature Co-electrolysis of steam/CO2 mixtures10.1149/2.0251611jes ↗
16. Pd-promoted La0.6Sr0.4Co0.2Fe0.8O3 cathodes10.1016/S0167-2738(98)00294-X ↗
17. Stabilizing nanostructured solid oxide fuel cell cathode with atomic layer deposition10.1021/nl402138w ↗
18. Structural, electrical, and electrochemical characteristics of LnBa0.5Sr0.5Co1.5Fe0.5O5+δ (Ln=Pr, Sm, Gd) as cathode materials in intermediate-temperature solid oxide fuel cells10.1002/ente.201600618 ↗
19. Preparation and evaluation of BaZr0.1Ce0.7Y0.1Yb0.1O3−δ (BZCYYb) electrolyte and BZCYYb-based solid oxide fuel cells10.1016/j.jpowsour.2013.01.011 ↗
20. Fabrication of lanthanum strontium cobalt ferrite–gadolinium-doped ceria composite cathodes using a low-price inkjet printer10.1021/acsami.7b11462 ↗
21. Fabrication of lanthanum strontium cobalt ferrite (LSCF) cathodes for high performance solid oxide fuel cells using a low price commercial inkjet printer10.1016/j.jpowsour.2015.12.067 ↗
22. PdO/Pd system equilibrium phase diagram under a gas mixture of oxygen and nitrogen10.1361/105497102770331721 ↗
23. Metastable Pd ↔ PdO structures during high temperature methane oxidation10.1007/s10562-017-2023-7 ↗
24. Comparative analysis of ceramic-carbonate nanocomposite fuel cells using composite GDC/NLC electrolyte with different perovskite structured cathode materials10.1007/s11705-017-1642-2 ↗
25. Effect of Fe doping on the performance of suspension plasma-sprayed PrBa0.5Sr0.5Co2−xFexO5+δ cathodes for intermediate-temperature solid oxide fuel cells10.1016/j.ceramint.2017.05.348 ↗
26. Evaluation of porous platinum, nickel, and lanthanum strontium cobaltite as electrode materials for low-temperature solid oxide fuel cells10.1016/j.ijhydene.2014.08.111 ↗
27. Coke-free oxidation of methanol in solid oxide fuel cells with heterogeneous nickel–palladium catalysts prepared by atomic layer deposition10.1021/acssuschemeng.0c03020 ↗