Li2S@NC composite enable high active material loading and high Li2S utilization for all-solid-state lithium sulfur batteries
Source abstract
Abstract
Abstract All-solid-state Li–S batteries (ASSLSBs) offer an opportunity to realize both high energy density, safety and reliability, via eliminating the polysulfides shuttle effect and flammable liquid electrolyte. However, the sluggish kinetics of S and Li2S solid conversion results in low discharge capacity at high active material loading, which is critical for ASSLSBs to implement the high energy density potential. Herein, nitrogen doped-carbon (NC) coated Li2S (Li2S@NC composite) is developed for ASSLSBs that highly improves electrochemical performance. A thin and uniform nitrogen doped-carbon layer is coated on Li2S via pyrolysis deposition approach to prepare Li2S@NC. The as obtained Li2S@NC composite exhibits greatly enhanced electrochemical performance with high reversible capacity, high coulombic efficiency of ~100%, good rate capability and cycling stability. Particularly, outstanding electrochemical performance with high capacity of 931 mAh g−1 can also be obtained at both high Li2S content (43%) and high areal Li2S loading (10.4 mg cm−2).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. How far away are lithium-sulfur batteries from commercialization?10.3389/fenrg.2019.00123 ↗
2. Recent progress in all-solid-state Lithium−Sulfur batteries using high Li-ion conductive solid electrolytes10.1007/s41918-019-00029-3 ↗
3. Nanostructured energy materials for electrochemical energy conversion and storage: a review10.1016/j.jechem.2016.11.003 ↗
4. Lithium polysulfidophosphates: a family of lithium-conducting sulfur-rich compounds for lithium-sulfur batteries10.1002/anie.201300680 ↗
5. Interfacial design for lithium–sulfur batteries: from liquid to solid
6. Designing safe electrolyte systems for a high-stability lithium-sulfur battery10.1002/aenm.201702348 ↗
7. Improved interfacial electronic contacts powering high sulfur utilization in all-solid-state lithium–sulfur batteries10.1016/j.ensm.2019.09.037 ↗
8. High-performance all-solid-state lithium–sulfur battery enabled by a mixed-conductive Li2S nanocomposite10.1021/acs.nanolett.6b01754 ↗
9. Rational in-situ construction of three-dimensional reduced graphene oxide supported Li2S/C composite as enhanced cathode for rechargeable lithium–sulfur batteries10.1016/j.jpowsour.2015.09.002 ↗
10. In situ formed lithium sulfide/microporous carbon cathodes for lithium-ion batteries10.1021/nn404601h ↗
11. Rechargeable lithium sulfide electrode for a polymer tin/sulfur lithium-ion battery10.1016/j.jpowsour.2010.06.093 ↗
12. Conversion from Li2SO4 to Li2S@ C on carbon paper matrix: a novel integrated cathode for lithium-sulfur batteries10.1016/j.jpowsour.2016.09.033 ↗
13. From metal–organic framework to Li2S@ C–Co–N nanoporous architecture: a high-capacity cathode for lithium–sulfur batteries10.1021/acsnano.6b05696 ↗
14. In situ generated Li2S–C nanocomposite for high-capacity and long-life all-solid-state lithium sulfur batteries with ultrahigh areal mass loading10.1021/acs.nanolett.9b00882 ↗
15. Nanoporous Li2S and MWCNT-linked Li2S powder cathodes for lithium-sulfur and lithium-ion battery chemistries10.1039/C3TA14161F ↗
16. High performance all-solid-state lithium-sulfur battery using a Li2S-VGCF nanocomposite10.1016/j.electacta.2017.01.155 ↗
17. A powerful approach to fabricate nitrogen-doped graphene sheets with high specific surface area10.1016/j.elecom.2011.10.028 ↗
18. Nitrogen-doped graphene/sulfur composite as cathode material for high capacity lithium–sulfur batteries10.1016/j.jpowsour.2014.01.093 ↗
19. High-rate, ultralong cycle-life lithium/sulfur batteries enabled by nitrogen-doped graphene10.1021/nl5020475 ↗
20. Dual‐confined flexible sulfur cathodes encapsulated in nitrogen‐doped double‐shelled hollow carbon spheres and wrapped with graphene for Li–S batteries10.1002/aenm.201402263 ↗
21. Strong lithium polysulfide chemisorption on electroactive sites of nitrogen-doped carbon composites for high-performance lithium-sulfur battery cathodes10.1002/anie.201411109 ↗
22. Stabilizing sulfur cathodes using nitrogen-doped graphene as a chemical immobilizer for Li-S batteries10.1016/j.carbon.2016.07.008 ↗
23. Facilitation of sulfur evolution reaction by pyridinic nitrogen doped carbon nanoflakes for highly-stable lithium-sulfur batteries10.1016/j.ensm.2017.07.015 ↗
24. High sulfur loading composite wrapped by 3D nitrogen-doped graphene as a cathode material for lithium–sulfur batteries10.1039/C3TA14921H ↗
25. Li7P3S11/poly(ethylene oxide) hybrid solid electrolytes with excellent interfacial compatibility for all-solid-state batteries10.1016/j.jpowsour.2018.08.016 ↗
26. High capacity all-solid-state lithium batteries enabled by pyrite-sulfur composites10.1002/aenm.201801462 ↗
27. High-capacity Li2S–nanocarbon composite electrode for all-solid-state rechargeable lithium batteries10.1039/c2jm16802b ↗
28. Li2S nanocomposites underlying high-capacity and cycling stability in all-solid-state lithium–sulfur batteries10.1016/j.jpowsour.2014.10.043 ↗