Improved safety and mechanical characterizations of thick lithium-ion battery electrodes structured with porous metal current collectors
Source abstract
Abstract
Abstract Porous metal current collectors enable the fabrication of thick electrode structures with improved safety margins and unique mechanical properties. Interpenetrating phase composite LiCoO2 cathodes and graphite anodes with large active material loadings are formed using advanced slurry processing techniques with a submersible ultrasonic horn. Full cells with 600 μm thick electrodes demonstrate high aerial capacity of 16.7 mAh.cm−2, improving energy density by 22% with respect to volume versus reference cells using traditional laminate composite electrode stacks. External shorting and nail penetration testing show notably suppressed joule heating currents, limiting peak temperature accrued to just 25% of the reference. Shear testing and three-point bending of individual electrodes and stack assemblies elucidate the greater role of the binder phase in the mechanical response, and that extensive characteristics such as thickness can be more influential than the intensive properties of the materials. Optimization of electrode thicknesses to balance rate capability with abuse safety is discussed, and opportunities for multifunctional application as load-bearing structural components are considered. Improved battery safety characteristics are demonstrated by reorienting the inherent components of the cell, without altering the chemical make-up, emphasizing the profound influence of structural design.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Design and fabrication of multifunctional structural batteries10.1016/j.jpowsour.2008.09.082 ↗
2. Performance metrics for structural composites with electrochemical multifunctionality10.1177/0021998314568167 ↗
3. Structural power composites10.1016/j.compscitech.2014.06.020 ↗
4. A multifunctional battery module design for electric vehicle10.1007/s40534-017-0144-8 ↗
5. Multifunctional structural lithium-ion battery for electric vehicles10.1177/1045389X16679021 ↗
6. Design of multifunctional structural batteries with health monitoring capabilities
7. Crashworthiness analysis of electric vehicle with energy-absorbing battery modules
8. Formulation and characterization of ultra-thick electrodes for high energy lithium-ion batteries employing tailored metal foams10.1016/j.jpowsour.2011.06.071 ↗
9. Ultra-thick Li-ion battery electrodes using different cell size of metal foam current collectors10.1039/C4RA14485F ↗
10. Development of new aluminum-celmet current collector that contributes to the improvement of various properties of energy storage devices
11. The potential for the creation of a high areal capacity lithium-sulfur battery using a metal foam current collector10.1149/2.0381701jes ↗
12. Modeling of the mechanical properties of a polymer-metal foam hybrid10.1016/j.mspro.2014.07.602 ↗
13. Characterization of aluminum foam-polypropylene interpenetrating phase composites: flexural test results10.1016/j.mechmat.2009.09.010 ↗
14. A metal foam as a current collector for high power and high capacity lithium iron phosphate batteries10.1039/C4TA03890H ↗
15. Aluminum-celmet―aluminum porous metal with three-dimensional consecutive pores
16. Internal resistance and polarization dynamics of lithium-ion batteries upon internal shorting10.1016/j.apenergy.2017.12.086 ↗
17. Investigation of short-circuit scenarios in a lithium-ion battery cell10.1149/2.096206jes ↗
18. Analysis of internal short-circuit in a lithium ion cell10.1016/j.jpowsour.2009.05.002 ↗
19. Abuse behavior of high-power, lithium-ion cells10.1016/S0378-7753(02)00488-3 ↗
20. Internal-short-mitigating current collector for lithium-ion battery10.1016/j.jpowsour.2017.03.004 ↗
21. Predicting and determining the bending stiffness of thin films and laminates10.1002/pts.540 ↗
22. Man portable power needs of the 21st century. I. Applications for the dismounted soldier. II. Enhanced capabilities through the use of hybrid power sources10.1016/S0378-7753(00)00484-5 ↗
23. Debonding at the interface between active particles and PVDF binder in Li-ion batteries10.1016/j.eml.2015.11.005 ↗
24. Toward efficient binders for Li-Ion battery Si-Based Anodes : polyacrylic acid10.1021/am100871y ↗
25. A review of lithium and non-lithium based solid state batteries10.1016/j.jpowsour.2015.02.054 ↗
26. Polyurethane binder for aqueous processing of Li-Ion battery10.1149/2.0641514jes ↗