Online estimation of thermal parameters based on a reduced wide-temperature-range electro-thermal coupled model for lithium-ion batteries
Source abstract
Abstract
Abstract To improve the accuracy of thermal model, optimize the design of heat dissipation system and evaluate online the thermal management system, an online estimation method of key thermal parameters is developed from carefully designed experiments, rather than being taken from the literature or the empirical value. The accurate prediction of heat generation, which is based on a reduced wide-temperature-range electro-thermal coupled model, is presented under easily obtainable alternating current excitation at different temperatures. To circumvent some inherent errors, a combined experimental/computational approach to simultaneously estimate the specific heat capacity and thermal resistance is proposed using quasi step power, with which the identification time is significantly reduced. The identified values of specific heat capacity and thermal resistance are validated with high accuracy. The adaptability validation is carried out under different temperatures and cooling conditions, as well as using different battery chemistries, indicating that the proposed method is generic. The in-situ methodology, thanks to good robustness on the colored noise, is capable of providing a promising candidate for accurate thermal modeling, on-board evaluation of battery thermal safety, and advanced design of thermal management system for electric vehicles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. An experimentally validated transient thermal model for cylindrical Li-ion cells10.1016/j.jpowsour.2014.07.118 ↗
2. A rapid low-temperature internal heating strategy with optimal frequency based on constant polarization voltage for lithium-ion batteries10.1016/j.apenergy.2016.05.151 ↗
3. Electro-thermal modeling and experimental validation for lithium ion battery10.1016/j.jpowsour.2011.10.027 ↗
4. Genetic identification and Fisher identifiability analysis of the Doyle–Fuller–Newman model from experimental cycling of a LiFePO4, cell10.1016/j.jpowsour.2012.03.009 ↗
5. Modelling the thermal behaviour of a lithium-ion battery during charge10.1016/j.jpowsour.2011.01.103 ↗
6. Thermal design for the pouch-type large-format lithium-ion batteries: I. Thermo-electrical modeling and origins of temperature non-uniformity10.1149/2.0831501jes ↗
7. Electro-thermal battery model identification for automotive applications10.1016/j.jpowsour.2010.06.037 ↗
8. New method for parameter estimation of an electrochemical-thermal coupling model for LiCoO2 battery10.1016/j.jpowsour.2015.12.058 ↗
9. Özgür Ekici, Köksal M. 3-D CFD modeling and experimental testing of thermal behavior of a Li-Ion battery10.1016/j.applthermaleng.2017.04.017 ↗
10. A modelling approach to understand charge discharge differences in thermal behavior in lithium iron phosphate-graphite battery10.1016/j.electacta.2017.05.049 ↗
11. Measurement of anisotropic thermophysical properties of cylindrical Li-ion cells10.1016/j.jpowsour.2013.11.107 ↗
12. Thermal properties of lithium-ion battery and components10.1149/1.1391704 ↗
13. Thermal modeling of large prismatic LiFePO4/graphite battery. Coupled thermal and heat generation models for characterization and simulation10.1016/j.jpowsour.2015.02.091 ↗
14. Thermal behavior of small lithium-ion battery during rapid charge and discharge cycles10.1016/j.jpowsour.2005.08.049 ↗
15. Thermal analysis of large-capacity LiFePO 4, power batteries for electric vehicles10.1016/j.jpowsour.2015.06.129 ↗
16. Adaptive thermal modeling of Li-ion batteries
17. Thermal modeling of a cylindrical LiFePO4/graphite lithium-ion battery10.1016/j.jpowsour.2009.10.105 ↗
18. Thermal parameters determination of battery cells by local heat flux measurements10.1016/j.jpowsour.2014.07.117 ↗
19. Experimental verification of a thermal equivalent circuit dynamic model on an extended range electric vehicle battery pack10.1016/j.jpowsour.2017.01.040 ↗
20. Internal heating of lithium-ion batteries using alternating current based on the heat generation model in frequency domain10.1016/j.jpowsour.2014.09.181 ↗
21. A generic electrothermal Li-ion battery model for rapid evaluation of cell temperature temporal evolution10.1109/TIE.2016.2618363 ↗
22. Model-based virtual thermal sensors for lithium-ion battery in EV applications10.1109/TIE.2014.2386793 ↗
23. Online parameterization of lumped thermal dynamics in cylindrical lithium ion batteries for core temperature estimation and health monitoring10.1109/TCST.2012.2217143 ↗
24. A lumped-parameter electro-thermal model for cylindrical batteries10.1016/j.jpowsour.2014.01.097 ↗
25. A rapid estimation and sensitivity analysis of parameters describing the behavior of commercial Li-ion batteries including thermal analysis10.1016/j.enconman.2014.06.076 ↗
26. Combined electrochemical, heat generation, and thermal model for large prismatic lithium-ion batteries in real-time applications10.1016/j.jpowsour.2017.06.031 ↗
27. Simultaneous estimation of thermal parameters for large-format laminated lithium-ion batteries10.1016/j.jpowsour.2014.02.079 ↗
28. Joint experimental/computational techniques to measure thermal properties of solids10.1088/0957-0233/9/6/004 ↗
29. Investigation of multidimensional electrothermal impedance spectroscopy measurement on lithium ion battery cell10.1149/07001.0305ecst ↗
30. Investigation of the thermal properties of a Li-ion pouch-cell by electrothermal impedance spectroscopy10.1016/j.jpowsour.2011.05.047 ↗
31. Thermal Impedance Spectroscopy - a method for the thermal characterization of high power battery cells10.1016/j.jpowsour.2012.07.144 ↗
32. A review of thermal performance improving methods of lithium ion battery: electrode modification and thermal management system10.1016/j.jpowsour.2015.09.001 ↗
33. A reduced low-temperature electro-thermal coupled model for lithium-ion batteries10.1016/j.apenergy.2016.05.153 ↗
34. Fang · 2001 · 5
35. Studies on LiFePO4, as cathode material using impedance spectroscopy10.1016/j.jpowsour.2010.09.121 ↗
36. Studies on the medium-frequency impedance arc for Lithium-ion batteries considering various alternating current amplitudes10.1007/s10800-015-0887-z ↗