journal article·2018-08

Self-supported Na0.7CoO2 nanosheet arrays as cathodes for high performance sodium ion batteries

Lin Gao, Si Chen, Lulu Zhang, Xuelin Yang

Publisher page

Abstract

Abstract For the first time, we successfully synthesize a self-supported Na0.7CoO2 nanosheet arrays via the facile “sodiation and post-calcination” method. Different from the traditional high temperature solid-state technique, this facile strategy can easily maintain the novel construction of the precursor. A mass loading as high as 8 mg cm−2 is achieved for the Na0.7CoO2 electrode with an initial capacity of 145.2 mAh g−1 at 1 C. Most importantly, the corresponding areal capacity for the Na0.7CoO2 electrode is calculated to be 1.16 mAh cm−2. This superb areal capacity is higher than that of the previously reported cathode materials. This special “sodiation and post-calcination” protocol mentioned in this article guarantees the high mass loading of Na0.7CoO2 on Ni foam, providing a straightforward direction for engineering high-areal-capacity cathode materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Where do batteries end and supercapacitors begin10.1126/science.1249625 ↗
2. Why do batteries fail10.1126/science.1253292 ↗
3. Towards greener and more sustainable batteries for electrical energy storage10.1038/nchem.2085 ↗
4. Recent progress in electrode materials for sodium-ion batteries10.1002/aenm.201600943 ↗
5. Research development on sodium-ion batteries10.1021/cr500192f ↗
6. Research development on sodium-ion batteries10.1021/acs.accounts.5b00482 ↗
7. Recent advances in titanium-based electrode materials for stationary sodium-ion batteries10.1039/C6EE01807F ↗
8. Li4Ti5O12-TiO2 nanowire arrays constructed with stacked nanocrystals for high-rate lithium and sodium ion batteries10.1016/j.jpowsour.2017.01.033 ↗
9. Layered oxide cathodes for sodium-ion batteries: phase transition, air stability, and performance
10. Progress in high-voltage cathode materials for rechargeable sodium-ion batteries10.1002/aenm.201701785 ↗
11. Commercial prospects of existing cathode materials for sodium ion storage10.1002/aenm.201700274 ↗
12. Na+/vacancy disordered P2-Na0.67Co1-xTixO2: high energy and high power cathode materials for sodium ion batteries10.1021/acsami.7b16077 ↗
13. Electrochemical stability of non-aqueous electrolytes for sodium-ion batteries and their compatibility with Na0.7CoO210.1039/C3CP53077A ↗
14. Fast discharge process of layered cobalt oxides due to high Na+ diffusion10.1038/srep09006 ↗
15. Patterning of sodium ions and the control of electrons in sodium cobaltate10.1038/nature05531 ↗
16. Synthesis and stoichiometry of different layered sodium cobalt oxides10.1021/cm5021788 ↗
17. Temperature dependent local structure of NaxCoO2 cathode material for rechargeable sodium-ion batteries10.1021/acs.jpcc.5b10885 ↗
18. A practical high-energy cathode for sodium-ion batteries based on uniform P2-Na0.7CoO2 microspheres10.1002/anie.201702024 ↗
19. Electrochemical investigation of the P2–NaxCoO2, phase diagram10.1038/nmat2920 ↗
20. Nanoarchitectured array electrodes for rechargeable lithium- and sodium-ion batteries10.1002/aenm.201502514 ↗
21. Large-scale highly ordered Sb nanorod arrays anode with high capacity and rate capability for sodium-ion batteries10.1039/C5EE00878F ↗
22. Half-cell and full-cell applications of highly stable and binder-free sodium ion batteries based on Cu3P nanowire anodes10.1002/adfm.201601323 ↗
23. G.Wang, MoS2 nanosheets Vertically aligned on carbon paper: a freestanding electrode for highly reversible sodium-ion batteries10.1002/aenm.201502161 ↗
24. Hierarchical 3D TiO2@Fe2O3 nanoframework arrays as high-performance anode materials10.1039/C4NR00387J ↗
25. Porous Li4Ti5O12-TiO2 nanosheet arrays for high performance lithium-ion batteries10.1039/C5TA01054C ↗
26. Rutile-TiO2 decorated Li4Ti5O12 nanosheet arrays with 3D interconnected architecture as anodes for high performance hybrid supercapacitors10.1039/C5TA07666H ↗
27. Engraving copper foil to give large-scale binder-free porous CuO arrays for a high-performance sodium-ion battery anode10.1002/adma.201304469 ↗
28. Aluminum storage behavior of anatase TiO2 nanotube arrays in aqueous solution for aluminum ion batteries10.1039/c2ee22987k ↗
29. Advanced arrayed bismuth nanorod bundle anode for sodium-ion batteries10.1039/C6TA02796B ↗
30. Self-standing porous LiCoO2 nanosheet arrays as 3D cathodes for flexible Li-ion batteries
31. Self-standing porous LiMn2O4 nanowall arrays as promising cathodes for advanced 3D microbatteries and flexible lithium-ion batteries10.1016/j.nanoen.2016.01.022 ↗
32. High-performance 2.6 V aqueous asymmetric supercapacitors based on in situ formed Na0.5MnO2 nanosheet assembled nanowall arrays10.1002/adma.201700804 ↗
33. Three-dimensional Co3O4@MnO2 hierarchical nanoneedle arrays: morphology control and electrochemical energy storage10.1002/adfm.201304206 ↗
34. Electrochemical properties of P2-phase Na0.74CoO2 compounds as cathode material for rechargeable sodium-ion batteries10.1016/j.electacta.2012.09.058 ↗
35. Investigation of thermal stability of P2-NaxCoO2 cathode materials for sodium ion batteries using real-time electron microscopy10.1021/acsami.7b04478 ↗
36. The electrochemical performance of nickel chromium oxide as a new anode material for lithium ion batteries, Electrochim
37. Electrochemical characteristics of lithium vanadate, Li3VO4 as a new sort of anode material for Li-ion batteries, J. Power Sources
38. Interwoven N and P dual-doped hollow carbon fibers/graphitic carbon nitride: an ultrahigh capacity and rate anode for Li and Na ion batteries10.1016/j.carbon.2017.06.040 ↗
39. Binder-free Li3V2(PO4)3/C membrane electrode supported on 3D nitrogen-doped carbon fibers for high-performance lithium-ion batteries10.1016/j.nanoen.2017.02.026 ↗
40. Ultrathin mesoporous NiCo2O4 nanosheets supported on Ni foam as advanced electrodes for supercapacitors10.1002/adfm.201200994 ↗
41. Solvent-controlled synthesis of NiO-CoO/carbon fiber nanobrushes with different densities and their excellent properties for lithium ion storage10.1021/acsami.5b07233 ↗
42. Atomic layer-by-layer Co3O4/graphene composite for high performance lithium-ion batteries10.1002/aenm.201501835 ↗
43. An advanced sodium-ion battery composed of carbon coated Na3V2(PO4)3 in a porous graphene network10.1002/adma.201502864 ↗
44. Duan · 2017 · vol.17 · 6018