journal article·2018-08

Fabrication and characterization of ultrathin thermoelectric device for energy conversion

Erzhen Mu, Gang Yang, Xuecheng Fu, Fengdan Wang, Zhiyu Hu

Publisher page

Abstract

Abstract The fabrication of a micro/nano-scale thermoelectric module is very challenging. In this paper, a reliable and efficient hybrid fabrication method for ultrathin thermoelectric devices based on the non-contact exposing, photoresist melting and microfabrication technology is presented. The total thickness of the thermoelectric module is about 1 μm. Twenty-one devices are fabricated successfully, of which each is composed of 127 pairs of thermoelectric legs connected in series with an average resistance of 25 Ω. Experimental results indicate that ultrathin thermoelectric device work stable and reliable, and demonstrate that the method presented is suitable for fabrication of thinner and higher integrality devices beyond TE devices in the micro-nanoscale range. Without a load and at the temperature of 150 °C, the output voltage and output current are 18.5 mV and 671.9 μA, respectively; summarily, at the temperature of 50 °C the output voltage and current are 6.1 mV and 240.1 μA, respectively. The peak output power density is 0.29 W/m2 and 2.9 × 105 W/m3. In addition, a one-dimensional heat transfer model is established to obtain a quantitative characterization for further numerical modeling. The present research can provide a useful guide for the design of a micro/nano-scale thermoelectric device in the near future.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. Fabrication and characterization of Bi2Te3-Based Chip-Scale thermoelectric energy harvesting devices10.1007/s11664-016-4992-5 ↗
2. Design and fabrication of MEMS thermoelectric generators with high temperature efficiency10.1016/j.sna.2007.11.032 ↗
3. Optimal design for micro-thermoelectric generators using finite element analysis10.1016/j.mee.2010.06.025 ↗
4. Design, fabrication, and characterization of CMOS MEMS-Based thermoelectric power generators10.1109/JMEMS.2010.2041035 ↗
5. Realization of a wearable miniaturized thermoelectric generator for human body applications10.1016/j.sna.2009.02.028 ↗
6. Fabrication method for thermoelectric nanodevices10.1002/adma.200401189 ↗
7. Fabrication of an all-oxide thermoelectric power generator10.1063/1.1376155 ↗
8. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems10.1126/science.1158899 ↗
9. Design of a concentration solar thermoelectric generator10.1007/s11664-010-1279-0 ↗
10. Thermoelectric materials for space and automotive power generation10.1557/mrs2006.49 ↗
11. An exhaust heat recovery system utilising thermoelectric generators and heat pipes10.1016/j.applthermaleng.2016.11.019 ↗
12. Structural design of a flexible thermoelectric power generator for wearable applications10.1016/j.apenergy.2018.01.074 ↗
13. Flexible thermoelectric power generator with Y-type structure using electrochemical deposition process10.1016/j.apenergy.2017.05.005 ↗
14. Wearable solar thermoelectric generator driven by unprecedentedly high temperature difference10.1016/j.nanoen.2017.08.061 ↗
15. Wearable thermoelectric power generators combined with flexible supercapacitor for Low-Power human diagnosis devices10.1109/TIE.2016.2613063 ↗
16. Silk fabric-based wearable thermoelectric generator for energy harvesting from the human body10.1016/j.apenergy.2015.11.038 ↗
17. Wearable thermoelectric generators for human body heat harvesting10.1016/j.apenergy.2016.08.150 ↗
18. A wearable thermoelectric generator fabricated on a glass fabric10.1039/c4ee00242c ↗
19. High-performance flat-panel solar thermoelectric generators with high thermal concentration10.1038/nmat3013 ↗
20. Solar thermoelectric generator for micropower applications10.1007/s11664-010-1190-8 ↗
21. Study of thermoelectric generation unit for radiant waste heat10.1016/j.matpr.2015.05.104 ↗
22. Experimental investigation of the applicability of a thermoelectric generator to recover waste heat from a combustion chamber10.1016/j.apenergy.2015.04.077 ↗
23. Design and fabrication of heat storage thermoelectric harvesting devices10.1109/TIE.2013.2257140 ↗
24. Optimization and fabrication of thick flexible polymer based micro thermoelectric generator10.1016/j.sna.2006.04.024 ↗
25. Optimization and fabrication of a thick printed thermoelectric device10.1007/s11664-011-1572-6 ↗
26. Dispenser-printed planar thick-film thermoelectric energy generators
27. Flexible thermoelectric generator for ambient assisted living wearable biometric sensors10.1016/j.jpowsour.2010.11.081 ↗
28. Hierarchical Bi–Te based flexible thin-film solar thermoelectric generator with light sensing feature10.1016/j.enconman.2015.10.052 ↗
29. Highly efficient thermoelectric microgenerators using nearly room temperature pulsed laser deposition10.1021/acsami.7b18852 ↗
30. Low interface resistance and excellent anti-oxidation of Al/Cu/Ni multilayer thin-film electrodes for Bi 2 Te 3 -based modules10.1016/j.nanoen.2017.08.034 ↗
31. Fabrication and thermoelectric performance of textured n-type Bi2(Te,Se)3 by spark plasma sintering10.1016/j.mseb.2005.01.002 ↗
32. Fabrication and thermoelectric properties of crystal-aligned nano-structured Bi2Te310.1016/j.jallcom.2011.02.059 ↗
33. Fabrication and thermoelectric properties of fine-grained TiNiSn compounds10.1016/j.jssc.2009.09.003 ↗
34. Fabrication and thermoelectric properties of Mg2Si1−xSnx (0≤x≤1.0) solid solutions by solid state reaction and spark plasma sintering10.1016/j.mseb.2008.12.029 ↗
35. Fabrication of a CoSb3-based thermoelectric module10.1016/j.mssp.2010.10.016 ↗
36. Fabrication and thermoelectric properties of highly textured Ca9Co12O28 ceramic10.1016/j.jallcom.2013.07.145 ↗
37. Multilayered carbon Nanotube/Polymer composite based thermoelectric fabrics10.1021/nl203806q ↗
38. Fabrication of nanostructured thermoelectric bismuth telluride thick films by electrochemical deposition10.1021/cm060171o ↗
39. Recent advances in thermoelectric materials10.1016/j.pmatsci.2016.07.002 ↗
40. Thermoelectric materials: energy conversion between heat and electricity10.1016/j.jmat.2015.01.001 ↗
41. Thin-film thermoelectric devices with high room-temperature figures of merit10.1038/35098012 ↗
42. High three-dimensional thermoelectric performance from low-dimensional bands10.1103/PhysRevLett.110.146601 ↗
43. High thermoelectric performance BiSbTe alloy with unique low-dimensional structure10.1063/1.3143104 ↗
44. Fabrication and characterization of a Nanowire/Polymer-Based nanocomposite for a prototype thermoelectric device10.1109/JMEMS.2004.828742 ↗
45. Fabrication and characterization of CMOS-MEMS thermoelectric micro generators10.3390/s100201315 ↗
46. Fabrication of bismuth Telluride-Based alloy thin film thermoelectric devices grown by metal organic chemical vapor deposition10.1007/s11664-009-0704-8 ↗
47. Liu · 2010 · vol 20
48. Packaging of Small-Scale thermoelectric generators for autonomous sensor nodes10.1109/TCPMT.2017.2698021 ↗
49. Combined effect of nanoscale grain size and porosity on lattice thermal conductivity of bismuth-telluride-based bulk alloys10.1063/1.4759326 ↗
50. Nanostructured thermoelectric materials: current research and future challenge10.1016/j.pnsc.2012.11.011 ↗
51. Developments in semiconductor thermoelectric materials10.1007/s11708-011-0150-1 ↗
52. Nanostructured Bi2Se3 films and their thermoelectric transport properties10.1002/anie.200600848 ↗
53. Effect of superlattice structure on the thermoelectric figure of merit10.1103/PhysRevB.51.13797 ↗
54. On-chip cooling by superlattice-based thin-film thermoelectrics10.1038/nnano.2008.417 ↗
55. A new type of low power thermoelectric micro-generator fabricated by nanowire array thermoelectric material10.1016/j.mee.2004.11.005 ↗
56. Thermoelectric microdevice fabricated by a MEMS-like electrochemical process10.1038/nmat943 ↗
57. A thermoelectric converter for energy supply10.1016/S0924-4247(98)00298-2 ↗
58. Characterization and optimization to improve uneven surface on MEMS bridge fabrication10.1016/j.displa.2014.08.004 ↗
59. Fabrication and measured performance of a first-generation microthermoelectric cooler10.1109/JMEMS.2005.851846 ↗
60. Smoothing and surface planarization of sacrificial layers in MEMS technology
61. Characterization and optimization of dry releasing for the fabrication of RF MEMS capacitive switches10.1088/0960-1317/17/10/014 ↗
62. Fabrication and characterization of a capacitive micromachined shunt switch10.1116/1.1690255 ↗
63. RF MEMS switches fabricated on microwave-laminate printed circuit boards10.1109/LED.2003.812150 ↗
64. A Self-Aligned offset polysilicon Thin-Film transistor using photoresist reflow10.1109/55.784457 ↗
65. Minimizing thick resist sidewall slope dependence on design geometry by optimizing bake conditions10.1016/S0167-9317(00)00349-X ↗
66. Systematic characterization of feature dimensions and closing pressures for microfluidic valves produced via photoresist reflow10.1039/c2lc40414a ↗
67. Photoresist adhesion effect of resist reflow process10.1143/JJAP.46.5738 ↗
68. Photoresist reflow method of microlens production Part I
69. Photoresist reflow method of microlens production Part II: analytic models10.1078/0030-4026-00187 ↗
70. New and old concepts in thermoelectric materials10.1002/anie.200900598 ↗
71. A mathematic model of thermoelectric module with applications on waste heat recovery from automobile engine
72. Thermal resistance analysis and optimization of photovoltaic-thermoelectric hybrid system10.1016/j.enconman.2017.04.004 ↗