Molten Carbonate Fuel Cell performance analysis varying cathode operating conditions for carbon capture applications
Source abstract
Abstract
Abstract The results of a systematic experimental campaign to verify the impact of real operating conditions on the performance of a complete Molten Carbonate Fuel Cell (MCFC) are presented. In particular, the effects of ageing and composition of water, oxygen and carbon dioxide in the cathodic feeding stream are studied through the analysis of current-voltage curves and Electrochemical Impedance Spectroscopy (EIS). Based on a proposed equivalent electrical circuit model and a fitting procedure, a correlation is found among specific operating parameters and single EIS coefficients. The obtained results suggest a new performance monitoring approach to be applied to MCFC for diagnostic purpose. Particular attention is devoted to operating conditions characteristic of MCFC application as CO2 concentrators, which, by feeding the cathode with exhaust gases, is a promising route for efficient and cheap carbon capture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Ionic liquids properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Life cycle assessment of molten carbonate fuel cells: state of the art and strategies for the future10.1016/j.jpowsour.2015.12.023 ↗
2. Integrated numerical and experimental study of a MCFC-plasma gasifier energy system10.1016/j.apenergy.2012.01.060 ↗
3. Molten carbonate fuel cell and gas turbine hybrid systems as distributed energy resources10.1016/j.apenergy.2011.05.043 ↗
4. A reduced order model of Molten Carbonate Fuel Cell: a proposal10.1016/j.ijhydene.2013.06.002 ↗
5. Performance assessment of natural gas and biogas fueled molten carbonate fuel cells in carbon capture configuration10.1016/j.jpowsour.2016.04.071 ↗
6. Carbon dioxide separation from high temperature fuel cell power plants10.1016/S0378-7753(02)00395-6 ↗
7. Carbon capture: energy wasting technologies or the MCFCs challenge?10.1016/j.ijhydene.2010.10.028 ↗
8. The carbon dioxide concentrator by using MCFC10.1016/S0378-7753(03)00084-3 ↗
9. Experimental investigation of CO2 separation from lignite flue gases by 100 cm2 single Molten Carbonate Fuel Cell10.1016/j.ijhydene.2013.08.144 ↗
10. Carbon capture with molten carbonate fuel cells: experimental tests and fuel cell performance assessment10.1016/j.ijggc.2012.05.002 ↗
11. Molten carbonate fuel cells for CO2 separation and segregation by retrofitting existing plants – an analysis of feasible operating windows and first experimental findings10.1016/j.ijggc.2015.01.012 ↗
12. Potential of molten carbonate fuel cells to enhance the performance of CHP plants in sewage treatment facilities10.1016/j.ijhydene.2012.09.145 ↗
13. Separating CO2 from flue gases using a molten carbonate fuel cell10.1016/j.ieri.2012.06.036 ↗
14. An experimental investigation into the use of molten carbonate fuel cells to capture CO2 from gas turbine exhaust gases10.1016/j.energy.2004.03.087 ↗
15. MCFC-based CO2 capture system for small scale CHP plants10.1016/j.ijhydene.2012.05.048 ↗
16. Application of molten carbonate fuel cells in cement plants for CO2 capture and clean power generation10.1016/j.egypro.2014.11.687 ↗
17. Economic analysis of CO2 capture from natural gas combined cycles using Molten Carbonate Fuel Cells10.1016/j.apenergy.2014.04.011 ↗
18. Using MCFC for high efficiency CO2 capture from natural gas combined cycles: comparison of internal and external reforming10.1016/j.apenergy.2013.01.045 ↗
19. Analysis of pollutant emissions from cogeneration and district heating systems aimed to a feasibility study of MCFC technology for carbon dioxide separation as retrofitting of existing plants10.1016/j.ijggc.2011.10.001 ↗
20. Extension of an effective MCFC kinetic model to a wider range of operating conditions10.1016/j.ijhydene.2015.10.152 ↗
21. Membranes and molten carbonate fuel cells to capture CO2 and increase energy production in natural gas power plants10.1021/ie302725a ↗
22. Adsorptive removal of H2S in biogas conditions for high temperature fuel cell systems10.1016/j.ijhydene.2014.07.173 ↗
23. Experimental influence of operating variables on the performances of MCFCs under SO2 poisoning10.1016/j.ijhydene.2015.03.041 ↗
24. Experimental and theoretical analysis of H2S effects on MCFCs10.1016/j.ijhydene.2012.03.086 ↗
25. Mechanical properties of the lithium aluminate matrix for MCFC reinforced with metal oxide materials10.1016/j.cap.2009.11.046 ↗
26. The stability of molten carbonate fuel cell electrodes: a review of recent improvements10.1016/j.apenergy.2011.07.009 ↗
27. Molten carbonate fuel cell: an experimental analysis of a 1kW system fed by landfill gas10.1016/j.apenergy.2014.11.044 ↗
28. Off-design operation of coal power plant integrated with natural gas fueled molten carbonate fuel cell as CO2 reducer
29. 2016
30. Application of ac impedance in fuel cell research and development10.1016/0013-4686(93)80341-V ↗
31. Gas electrode reactions in molten carbonate media IV. Electrode kinetics and mechanism of hydrogen oxidation in (Li + K)CO3 eutectic10.1149/1.2086612 ↗
32. More accurate macro-models of solid oxide fuel cells through electrochemical and microstructural parameter estimation – Part I: Experimentation10.1016/j.jpowsour.2015.06.118 ↗
33. More accurate macro-models of solid oxide fuel cells through electrochemical and microstructural parameter estimation – Part II: parameter estimation10.1016/j.jpowsour.2015.03.129 ↗
34. Performance studies of bare and Co-plated titanium alloy as cathode current collector in Molten Carbonate Fuel Cell (MCFC)10.1016/j.surfcoat.2006.12.019 ↗
35. “Electrochemical performance of Y2O3/NiO cathode in the molten Li0.62/K0.38 carbonates eutectics10.1016/j.materresbull.2006.03.007 ↗
36. Porous nickel MCFC cathode coated by potentiostatically deposited cobalt oxide10.1016/j.jpowsour.2007.06.013 ↗
37. Electrochemical performance of reversible molten carbonate fuel cells10.1016/j.ijhydene.2014.02.144 ↗
38. Effect of sulfur contaminants on MCFC performance10.1016/j.ijhydene.2014.03.068 ↗
39. Electrochemical impedance study of the poisoning behaviour of Ni-based anodes at low concentrations of H2S in an MCFC
40. AC impedance technique in PEM fuel cell diagnosis—a review10.1016/j.ijhydene.2007.05.036 ↗
41. Electrochemical impedance spectroscopy for direct methanol fuel cell diagnostics10.1149/1.2266623 ↗
42. Electrochemical AC impedance model of a solid oxide fuel cell and its application to diagnosis of multiple degradation modes10.1016/j.jpowsour.2007.02.010 ↗
43. Non-destructive delamination detection in solid oxide fuel cells10.1016/j.jpowsour.2007.02.042 ↗
44. Diagnosis methodology and technique for solid oxide fuel cells: a review10.1016/j.ijhydene.2013.02.024 ↗
45. ac-superimposed-on-dc characteristics of fuel cell electrode reactions—part I. Partially submerged smooth electrode10.1016/0013-4686(93)80110-L ↗
46. “Experimental investigation of SO2 poisoning in a molten carbonate fuel cell operating in CCS configuration
47. Effect of carbon monoxide addition to the anode of a molten carbonate fuel cell10.1016/j.jpowsour.2003.07.014 ↗
48. Modeling the performance of MCFC for various fuel and oxidant compositions10.1016/j.ijhydene.2014.05.151 ↗
49. Kinetic modelling of molten carbonate fuel cells: effects of cathode water and electrode materials10.1016/j.jpowsour.2016.08.123 ↗
50. Analysis of electrochemical impedance spectroscopy in proton exchange membrane fuel cells10.1002/er.1144 ↗
51. CV and EIS study of hydrogen fuel cell durability in automotive applications10.1016/S1452-3981(23)13167-1 ↗
52. AC impedance characteristics of a 2 kW PEM fuel cell stack under different operating conditions and load changes10.1016/j.ijhydene.2007.06.024 ↗
53. Application of MCFCs for active CO2 capture within natural gas combined cycles10.1016/j.egypro.2011.01.179 ↗
54. Hoenig · 2009
55. Effect of various stack parameters on temperature rise in molten carbonate fuel cell stack operation10.1016/S0378-7753(00)00463-8 ↗
56. Performance analysis of molten carbonate fuel cell using a Li/Na electrolyte10.1016/S0378-7753(02)00468-8 ↗
57. Water effect on oxygen reduction in molten (Li + K)CO3 eutectic10.1016/0022-0728(96)04514-7 ↗
58. O2 -reduction at high temperature: MCFC
59. Impedance analysis for oxygen reduction in a lithium carbonate melt: effects of partial pressure of carbon dioxide and temperature10.1149/1.2220786 ↗
60. CPE analysis by local electrochemical impedance spectroscopy10.1016/j.electacta.2005.02.128 ↗
61. Contribution of surface distributions to constant-phase-element (CPE) behavior: 1. Influence of roughness10.1016/j.electacta.2015.05.010 ↗
62. Gas Electrode Reactions in Molten Carbonate Media Part V. Electrochemical Analysis of th.e Oxygen Reduction Mechanism at a Fully Immersed Gold Electrode10.1149/1.2054895 ↗
63. Investigation of the oxygen electrode reaction in basic molten carbonates using electrochemical impedance spectroscopy10.1016/S0013-4686(01)00522-9 ↗
64. Interpretation of finite-length-Warburg-type impedances in supported and unsupported electrochemical cells with kinetically reversible electrodes10.1149/1.2085788 ↗
65. The polarization of molten carbonate fuel cell electrodes10.1149/1.2085474 ↗
66. Thermal management of the molten carbonate fuel cell plane10.1016/j.jpowsour.2010.02.031 ↗