Intelligent energy harvesting scheme for microbial fuel cells: Maximum power point tracking and voltage overshoot avoidance
Source abstract
Abstract
Abstract Microbial fuel cells (MFCs) are renewable and sustainable energy sources that can be used for various applications. The MFC output power depends on its biochemical conditions as well as the terminal operating points in terms of output voltage and current. There exists one operating point that gives the maximum possible power from the MFC, maximum power point (MPP), for a given operating condition. However, this MPP may vary and needs to be tracked in order to maintain the maximum power extraction from the MFC. Furthermore, MFC reactors often develop voltage overshoots that cause drastic drops in the terminal voltage, current, and the output power. When the voltage overshoot happens, an additional control measure is necessary as conventional MPPT algorithms will fail because of the change in the voltage-current relationship. In this paper, the extremum seeking (ES) algorithm was used to track the varying MPP and a voltage overshoot avoidance (VOA) algorithm is developed to manage the voltage overshoot conditions. The proposed ES-MPPT with VOA algorithm was able to extract 197.2 mJ during 10-min operation avoiding voltage overshoot, while the ES MPPT-only scheme stopped harvesting after only 18.75 mJ because of the voltage overshoot happened at 0.4 min.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microbial Fuel Cells and Bioremediation · Electrochemical Analysis and Applications · Electrochemical sensors and biosensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Electricity generation using an air-cathode single chamber microbial fuel cell in the presence and absence of a proton exchange membrane10.1021/es0499344 ↗
2. Microbial fuel cells: methodology and technology10.1021/es0605016 ↗
3. A state of the art review on microbial fuel cells: a promising technology for wastewater treatment and bioenergy10.1016/j.biotechadv.2007.05.004 ↗
4. Practical energy harvesting for microbial fuel cells: a review10.1021/es5047765 ↗
5. Power management system for a 2.5 W remote sensor powered by a sediment microbial fuel cell10.1016/j.jpowsour.2010.08.099 ↗
6. Powering a wireless temperature sensor using sediment microbial fuel cells with vertical arrangement of electrodes10.1016/j.jpowsour.2011.07.037 ↗
7. Temperature and humidity sensor powered by an individual microbial fuel cell in a power management system10.3390/s150923126 ↗
8. Composition and distribution of internal resistance in three types of microbial fuel cells10.1007/s00253-007-1193-4 ↗
9. Quantification of the internal resistance distribution of microbial fuel cells quantification of the internal resistance distribution of microbial fuel cells10.1021/es801229j ↗
10. Control of power sourced from a microbial fuel cell reduces its start-up time and increases bioelectrochemical activity10.1016/j.biortech.2013.04.087 ↗
11. Reducing start-up time and minimizing energy losses of microbial fuel cells using maximum power point tracking strategy10.1016/j.jpowsour.2014.07.033 ↗
12. Multiparametric control for enhanced biofilm selection in microbial fuel cells10.1002/jctb.4760 ↗
13. The effect of real-time external resistance optimization on microbial fuel cell performance10.1016/j.watres.2010.11.033 ↗
14. External resistances applied to MFC affect core microbiome and swine manure treatment efficiencies10.1371/journal.pone.0164044 ↗
15. Controlling for peak power extraction from microbial fuel cells can increase stack voltage and avoid cell reversal10.1016/j.jpowsour.2014.06.059 ↗
16. Electrical energy generation from a large number of microbial fuel cells operating at maximum power point electrical load10.1016/j.jpowsour.2012.01.082 ↗
17. Hysteresis controller based maximum power point tracking energy harvesting system for microbial fuel cells10.1016/j.jpowsour.2012.01.053 ↗
18. Active energy harvesting from microbial fuel cells at the maximum power point without using resistors10.1021/es300313d ↗
19. Degrenne · 2011 · 889
20. Efficient energy harvester for microbial fuel cells using DC/DC converters
21. Power electronic converters for microbial fuel cell energy extraction: effects of inductance, duty ratio, and switching frequency10.1016/j.jpowsour.2012.07.092 ↗
22. Power overshoot in two-chambered microbial fuel cell (MFC)10.1016/j.biortech.2010.12.015 ↗
23. Analysis of polarization methods for elimination of power overshoot in microbial fuel cells10.1016/j.elecom.2010.11.011 ↗
24. Winfield · 2011 · vol. 81 · 22
25. Controlling the occurrence of power overshoot by adapting microbial fuel cells to high anode potentials10.1016/j.bioelechem.2012.10.004 ↗
26. Adaptation to high current using low external resistances eliminates power overshoot in microbial fuel cells10.1016/j.bios.2011.06.045 ↗
27. Extremum seeking from 1922 to 2010
28. Performance improvement and limitations in extremum seeking control10.1016/S0167-6911(99)00111-5 ↗
29. Ariyur · 2003