journal article·2016-12Open access

A self-discharge model of Lithium-Sulfur batteries based on direct shuttle current measurement

Vaclav Knap, Daniel-Ioan Stroe, Maciej Swierczynski, Rajlakshmi Purkayastha, Karsten Propp, Remus Teodorescu, Erik Schaltz

Abstract

In the group of post Lithium-ion batteries, Lithium-Sulfur (Li-S) batteries attract a high interest due to their high theoretical limits of the specific capacity of 1672 Ah kg−1 and specific energy of around 2600 Wh kg−1. However, they suffer from polysulfide shuttle, a specific phenomenon of this chemistry, which causes fast capacity fade, low coulombic efficiency, and high self-discharge. The high self-discharge of Li-S batteries is observed in the range of minutes to hours, especially at a high state of charge levels, and makes their use in practical applications and testing a challenging process. A simple but comprehensive mathematical model of the Li-S battery cell self-discharge based on the shuttle current was developed and is presented. The shuttle current values for the model parameterization were obtained from the direct shuttle current measurements. Furthermore, the battery cell depth-of-discharge values were recomputed in order to account for the influence of the self-discharge and provide a higher accuracy of the model. Finally, the derived model was successfully validated against laboratory experiments at various conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advanced Battery Materials and Technologies · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Recent progress and remaining challenges in sulfur-based lithium secondary batteries - a review10.1039/c3cc46131a ↗
2. Lithium sulfur batteries, a mechanistic review10.1039/C5EE01388G ↗
3. Investigation of the self-discharge behavior of lithium-sulfur batteries10.1149/2.0641606jes ↗
4. Polysulfide shuttle study in the Li/S battery system10.1149/1.1806394 ↗
5. Self-discharge of lithium–sulfur cells using stainless-steel current-collectors10.1016/j.jpowsour.2004.08.039 ↗
6. Self-discharge characteristics of lithium/sulfur batteries using TEGDME liquid electrolyte10.1016/j.electacta.2006.01.086 ↗
7. Improving the self-discharge behavior of sulfur-polypyrrole cathode material by LiNO3 electrolyte additive10.1007/s11581-014-1095-2 ↗
8. Mechanistic modeling of polysulfide shuttle and capacity loss in lithium–sulfur batteries10.1016/j.jpowsour.2014.02.082 ↗
9. Systematical electrochemical study on the parasitic shuttle-effect in lithium-sulfur-cells at different temperatures and different rates10.1016/j.jpowsour.2014.02.075 ↗
10. A zero dimensional model of lithium-sulfur batteries during charge and discharge
11. Parfitt · 2012
12. Direct measurement of polysulfide shuttle current: a window into understanding the performance of lithium-sulfur cells10.1149/2.0181501jes ↗
13. Critical review of the methods for monitoring of lithium-ion batteries in electric and hybrid vehicles10.1016/j.jpowsour.2014.02.064 ↗
14. Analysis of capacity-rate data for lithium batteries using simplified models of the discharge process10.1023/A:1018481030499 ↗
15. Multi-temperature state-dependent equivalent circuit discharge model for lithium-sulfur batteries10.1016/j.jpowsour.2016.07.090 ↗
16. A study on battery model parametrisation problem – application-oriented trade-offs between accuracy and simplicity