journal article·2016-10

Simulation and in situ measurement of stress distribution in a polymer electrolyte membrane fuel cell stack

Javier de la Cruz, Ulises Cano, Tatiana Romero

Publisher page

Abstract

Abstract A critical parameter for PEM fuel cell's electric contact is the nominal clamping pressure. Predicting the mechanical behavior of all components in a fuel cell stack is a very complex task due to the diversity of materials properties. Prior to the integration of a 3 kW PEMFC power plant, a numerical simulation was performed in order to obtain the mechanical stress distribution for two of the most pressure sensitive components of the stack: the membrane, and the graphite plates. The stress distribution of the above mentioned components was numerically simulated by finite element analysis and the stress magnitude for the membrane was confirmed using pressure films. Stress values were found within the elastic zone which guarantees mechanical integrity of fuel cell components. These low stress levels particularly for the membrane will allow prolonging the life and integrity of the fuel cell stack according to its design specifications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advanced Battery Technologies Research · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Recent Patents on Materials Science, ISSN (Print): 1874-4648 ISSN (Online): Editor-in-Chief: Khurshid Zaman, Bentham Science Publishers, USA (http://benthamscience.com/journals/recent-patents-on-materials-science/volume/8/issue/1/page/15/).
2. Anti-corrosion methods for fuel cell metal bipolar plates: a review of recent patent literature10.2174/2210683911101020093 ↗
3. Materials for proton exchange membranes and membrane electrode assemblies for PEM fuel cells - reportlinker review
4. An equivalent electrical circuit model of proton exchange membrane fuel cells based on mathematical modelling10.3390/en5082724 ↗
5. Performance characteristics of a PEM fuel cell with parallel flow channels at different cathode relative humidity levels10.3390/s91109104 ↗
6. Three-dimensional transport modeling for proton exchange membrane(PEM) fuel cell with micro parallel flow field10.3390/s8031475 ↗
7. A performance and degradation study of Nafion 212 membrane for proton exchange membrane fuel cells10.1016/j.jpowsour.2009.04.038 ↗
8. Coupled mechanical stress and multi-dimensional CFD analysis for high temperature proton exchange membrane fuel cells (HT-PEMFCs)10.1016/j.ijhydene.2012.07.122 ↗
9. Mechanical response of fuel cell membranes subjected to a hygro-thermal cycle10.1016/j.jpowsour.2006.05.020 ↗
10. Mechanical properties of a reinforced composite polymer electrolyte membrane and its simulated performance in PEM fuel cells10.1016/j.jpowsour.2007.09.093 ↗
11. Performance of Nafion® N115, Nafion® NR-212, and Nafion® NR-211 in a 1 kW class all vanadium mixed acid redox flow battery10.1016/j.jpowsour.2015.03.099 ↗
12. Recovery mechanisms in proton exchange membrane fuel cells after accelerated stress tests10.1016/j.jpowsour.2015.07.063 ↗
13. Stress relaxation behavior of EPDM seals in polymer electrolyte membrane fuel cell environment10.1016/j.ijhydene.2012.06.098 ↗
14. Supercritical carbon dioxide treated Nafion 212 commercial membranes for direct methanol fuel cells10.1016/j.elecom.2011.09.022 ↗
15. The degradation study of Nafion/PTFE composite membrane in PEM fuel cell under accelerated stress tests10.1016/j.ijhydene.2014.02.142 ↗
16. Experimental investigation and discussion on the mechanical endurance limit of nafion membrane used in proton exchange membrane fuel cell10.3390/en7106401 ↗
17. Modeling and simulation for fuel cell polymer electrolyte membrane10.3390/polym5010056 ↗
18. Hygro-thermal mechanical behavior of Nafion during constrained swelling10.1016/j.jpowsour.2010.11.116 ↗
19. Mechanical behavior of fuel cell membranes under humidity cycles and effect of swelling anisotropy on the fatigue stresses10.1016/j.jpowsour.2007.03.063 ↗
20. Mechanical properties of Nafion 212 proton exchange membrane subjected to hygrothermal aging10.1016/j.jpowsour.2013.03.042 ↗
21. Mechanical simulation of a proton exchange membrane fuel cell stack using representative elementary volumes of stamped metallic bipolar plates10.1016/j.ijhydene.2014.06.125 ↗
22. Membrane degradation during combined chemical and mechanical accelerated stress testing of polymer electrolyte fuel cells10.1016/j.jpowsour.2014.01.106 ↗
23. Numerical study of thermal stresses in high-temperature proton exchange membrane fuel cell (HT-PEMFC)10.1016/j.ijhydene.2013.01.201 ↗
24. Out-of-phase thermo-mechanical coupling behavior of proton exchange membranes10.1016/j.jpowsour.2010.11.071 ↗
25. SUMINDU · 2016
26. 2016
27. E-Z LOK · 2016
28. 2016
29. XIAMETER®, “RTV-4130-J Kit,” June 2016. Available: https://www.xiameter.com/EN/Pages/RetrieveDocument.aspx?type=PDS&DocumentId=090276fe8018f40e&s=57177.
30. 2016
31. 2016
32. Effect of mechanical compression on chemical degradation of Nafion membranes10.1149/2.008405eel ↗
33. Kusoglu · J. Power Sources · 2006 · 161 · 98710.1016/j.jpowsour.2006.05.020 ↗
34. Kusoglu · J. Electrochem. Soc. · 2010 · 157 · B70510.1149/1.3328496 ↗
35. A degradation study of Nafion proton exchange membrane of PEM fuel cells10.1016/j.jpowsour.2007.03.061 ↗
36. Understanding the effects of compression and constraints on water uptake of fuel-cell membranes10.1149/2.097112jes ↗
37. Effect of compression on PFSA-ionomer morphology and predicted conductivity changes10.1016/j.memsci.2012.07.027 ↗
38. Mechanical properties of nafion and titania/nafion composite membranes for polymer electrolyte membrane fuel cells10.1002/polb.20857 ↗