Lan+1NinO3n+1 (n = 2 and 3) phases and composites for solid oxide fuel cell cathodes: Facile synthesis and electrochemical properties
Source abstract
Abstract
In this work we present a modified citrate-nitrate route using citric acid as a chelating agent as an effective and facile strategy to obtain nanocrystalline La3Ni2O7+δ (L3N2) and La4Ni3O10−δ (L4N3) powders for the preparation of solid oxide fuel cell cathodes. Both samples crystallize in a Fmmm orthorhombic layered Lan+1NinO3n+1 Ruddlesden-Popper structure, with n = 2 and 3, respectively. The oxygen non-stoichiometry, determined by TGA is equal to 0.05 and 0.06 for L3N2 and L4N3, respectively. The thermal expansion coefficient values of L3N2 and L4N3 are 11.0 × 10−6 K−1 and 11.5 × 10−6 K−1, respectively. This study focused on L3N2, L4N3 and on novel composite electrodes with CGO (Ce0.9Gd0.1O2−δ): L3N2-CGO and L4N3-CGO with a view to taking advantage of their complimentary properties, i.e. high ionic conductivity of CGO and high electronic conductivity of Lan+1NinO3n+1 (n = 2 and 3). A significant improvement of the polarization resistance, from 1.0 to 0.03 Ω cm2 and from 1.5 to 0.52 Ω cm2 at 700 °C, is obtained when 50 wt% CGO is added to L3N2 and L4N3, respectively. In addition, the L3N2-CGO composite shows good long-term stability at 900 °C for 2 weeks in air, confirming its suitability as a SOFC cathode.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Materials development for intermediate-temperature solid oxide electrochemical devices10.1007/s10853-011-6213-1 ↗
2. Materials for intermediate-temperature solid-oxide fuel cells10.1146/annurev-matsci-070813-113426 ↗
3. New chemical systems for solid oxide fuel cells10.1021/cm902687z ↗
4. Materials for solid oxide fuel cells10.1021/cm902640j ↗
5. Advances in layered oxide cathodes for intermediate temperature solid oxide fuel cells10.1039/b922430k ↗
6. Ruddlesden Popper oxides of LnSr3Fe3O10−δ (Ln = La, Pr, Nd, Sm, Eu, and Gd) as active cathodes for low temperature solid oxide fuel cells10.1039/C5TA01273B ↗
7. Mass transport in La2Ni1−xCoxO4+δ oxides with the K2NiF4 structure10.1016/S0167-2738(02)00506-4 ↗
8. A comparative study of the Ruddlesden-Popper series, Lan+1NinO3n+1 (n = 1, 2 and 3), for solid-oxide fuel-cell cathode applications10.1016/j.ssi.2006.05.005 ↗
9. Electrode properties of the Ruddlesden–Popper Series, Lan+1NinO3n+1 (n= 1, 2, and 3), as intermediate-temperature solid oxide fuel cells10.1111/j.1551-2916.2010.03743.x ↗
10. Enhanced high-temperature electronic transport properties in nanostructured epitaxial thin films of the Lan+1NinO3n+1 Ruddlesden−Popper series (n = 1, 2, 3, ∞)10.1021/cm070804e ↗
11. Oxygen diffusion and surface exchange in La2−xSrxNiO4+δ10.1016/S0167-2738(00)00388-X ↗
12. Nd2−xLaxNiO4+δ, A mixed ionic/electronic conductor with interstitial oxygen, as a cathode material10.1016/j.ssi.2007.01.013 ↗
13. High performance SOFC cathode prepared by infiltration of Lan + 1NinO3n + 1 (n = 1, 2, and 3) in porous YSZ10.1149/1.3598170 ↗
14. Passage from T-type to T′-type arrangement by reducing R4Ni3O10 to R4Ni3O8 (R = La, Pr, Nd)10.1016/0022-4596(92)90061-Y ↗
15. XANES study on Ruddlesden-Popper phase, Lan+1NinO3n+1 (n = 1, 2, and ∞)10.1107/S0909049500015983 ↗
16. New preparation method of Lan+1NinO3n+1–δ (n=2, 3)10.1039/a702424j ↗
17. Recent developments in Ruddlesden–Popper nickelate systems for solid oxide fuel cell cathodes10.1007/s10008-006-0127-x ↗
18. Effect of sintering temperature on microstructure and performance of LSM–YSZ composite cathodes10.1016/S0167-2738(00)00818-3 ↗
19. Characterization of LSM-YSZ composite electrode by ac impedance spectroscopy10.1016/S0167-2738(01)00877-3 ↗
20. Electrochemical performance of Pr0.7Sr0.3Co0.9Cu0.1O3−δ–Ce0.8Sm0.2O1.9 composite cathodes in intermediate-temperature solid oxide fuel cells10.1016/j.jpowsour.2008.06.027 ↗
21. La0.9Sr0.1Ga0.8Mg0.2O3−δ-La0.6Sr0.4Co0.2Fe0.8O3−θ composite cathodes for intermediate-temperature solid oxide fuel cells10.1016/j.ssi.2008.02.063 ↗
22. Characteristics of Ba0.5Sr0.5Co0.8Fe0.2O3−δ–La0.9Sr0.1Ga0.8Mg0.2O3−δ composite cathode for solid oxide fuel cell10.1016/j.jpowsour.2007.09.088 ↗
23. Fabrication and characterization of solid oxide fuel cell cathodes made from nano-structured LSCF-SDC composite feedstock10.1016/j.jpowsour.2013.03.040 ↗
24. LSCF-SDC core-shell high-performance durable composite cathode10.1016/j.jpowsour.2009.06.079 ↗
25. Ce0.9Gd0.1O1.95 supported La0.6Sr0.4Co0.2Fe0.8O3−δ cathodes for solid oxide fuel cells10.1016/j.ceramint.2012.02.049 ↗
26. Development of LSCF–GDC composite cathodes for low-temperature solid oxide fuel cells with thin film GDC electrolyte10.1016/j.ijhydene.2008.04.034 ↗
27. La2−xPrxNiO4+δ as suitable cathodes for metal supported SOFCs10.1016/j.ssi.2015.05.005 ↗
28. High performance La3Ni2O7 cathode prepared by a facile sol–gel method for intermediate temperature solid oxide fuel cells10.1016/j.elecom.2012.06.004 ↗
29. Preparation and electrochemical characterization of Ruddlesden–Popper oxide La4Ni3O10 cathode for IT-SOFCs by sol–gel method10.1007/s10008-013-2150-z ↗
30. Novel La2NiO4+δ and La4Ni3O10−δ composites for solid oxide fuel cell cathodes10.1016/j.jpowsour.2013.06.106 ↗
31. Synthesis and characterization of La4Ni3−xCoxO10±δ (0.0 ≤ x ≤ 3.0, Δx = 0.2) for solid oxide fuel cell cathodes10.1016/j.ssi.2006.01.017 ↗
32. In situ high temperature neutron powder diffraction study of oxygen-rich La2NiO4+δ in air: correlation with the electrical behavior10.1039/B605886H ↗
33. Synthesis, structure, and properties of the layered perovskite La3Ni2O7−δ10.1006/jssc.1994.1059 ↗
34. Direct syntheses of mixed ion and electronic conductors La4Ni3O10 and La3Ni2O7 from nanosized coprecipitates10.1021/cm070134c ↗
35. Neutron Diffraction Study of La3Ni2O7: structural relationships among n =1, 2, and 3 phases Lan+1NinO3n+110.1006/jssc.2000.8721 ↗
36. Synthesis, structure, and properties of Ln4Ni3O10−δ (Ln = La, Pr, and Nd)10.1006/jssc.1995.1269 ↗
37. Continuous hydrothermal synthesis of CoFe2O4 nanoparticles
38. Characteristics of lithium iron phosphate (LiFePO4) particles synthesized in subcritical and supercritical water10.1016/j.supflu.2004.12.005 ↗
39. Surface composition of layered Ruddlesden-Popper Lan+1NinO3n+1 (n = 1, 2 and 3) epitaxial films10.1149/06602.0089ecst ↗
40. Hydrothermal synthesis of nanostructured inorganic powders by a continuous process under supercritical conditions10.1016/j.jeurceramsoc.2005.03.202 ↗
41. Transmission electron microscopy study of Ruddlesden–Popper Can+1MnnO3n+1 n =2 and 3 compounds10.1016/S0022-4596(03)00283-4 ↗
42. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
43. Generalized syntheses of large-pore mesoporous metal oxides with semicrystalline frameworks10.1038/24132 ↗
44. Synthesis of Cu–Zn–Zr–Al–O catalysts via a citrate complex route modified by different solvents and their dehydrogenation/hydrogenation performance10.1039/C5RA13778K ↗
45. On the equilibrium of liquid conducting masses charged with electricit10.1080/14786448208628425 ↗
46. The oxygen deficient Ruddlesden–Popper La3Ni2O7−δ (δ = 0.65) phase: structure and properties10.1016/j.materresbull.2006.01.028 ↗
47. Electrochemical characteristics of LSCF–SDC composite cathode for intermediate temperature SOFC10.1016/j.electacta.2007.01.001 ↗
48. A kinetic study of oxygen reduction reaction on La2NiO4 cathodes by means of impedance spectroscopy10.1016/j.jelechem.2007.08.006 ↗
49. Oxygen reduction reaction on Ruddlesden–Popper phases studied by impedance spectroscopy10.1149/1.3511770 ↗
50. Characterization of Ba-deficient PrBa1−xCo2O5+δ as cathode material for intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2012.01.034 ↗
51. Influence of configuration and microstructure on performance of La2NiO4+δ intermediate-temperature solid oxide fuel cells cathodes10.1016/j.jpowsour.2013.03.192 ↗
52. Scale-down and Sr-Doping effects on La4Ni3O10−δ–YSZ nanocomposite cathodes for IT-SOFCs10.1149/2.0791414jes ↗
53. Synthesis and characterization of aluminum-doped perovskites as cathode materials for intermediate temperature solid oxide fuel cells10.1016/j.ijhydene.2012.04.113 ↗
54. Electrochemical properties of LaBaCo2O5+δ–Sm0.2Ce0.8O1.9 composite cathodes for intermediate-temperature solid oxide fuel cells10.1016/j.electacta.2009.07.040 ↗
55. Reactivity at the Ln2NiO4+δ/electrolyte interface (Ln = La, Nd) studied by electrochemical impedance spectroscopy and transmission electron microscopy10.1016/j.jpowsour.2014.04.082 ↗
56. Structural and sintering characteristics of the La2Ni1−xCoxO4+δ series10.1016/j.ceramint.2003.12.164 ↗
57. Novel K2NiF4-type materials for solid oxide fuel cells: compatibility with electrolytes in the intermediate temperature range10.1002/fuce.200800023 ↗