journal article·2016-08

Tolerance of non-platinum group metals cathodes proton exchange membrane fuel cells to air contaminants

Tatyana Reshetenko, Alexey Serov, Kateryna Artyushkova, Ivana Matanovic, Sarah Stariha, Plamen Atanassov

Publisher page

Abstract

Abstract The effects of major airborne contaminants (SO2, NO2 and CO) on the spatial performance of Fe/N/C cathode membrane electrode assemblies were studied using a segmented cell system. The injection of 2–10 ppm SO2 in air stream did not cause any performance decrease and redistribution of local currents due to the lack of stably adsorbed SO2 molecules on Fe-Nx sites, as confirmed by density functional theory (DFT) calculations. The introduction of 5–20 ppm of CO into the air stream also did not affect fuel cell performance. The exposure of Fe/N/C cathodes to 2 and 10 ppm NO2 resulted in performance losses of 30 and 70–75 mV, respectively. DFT results showed that the adsorption energies of NO2 and NO were greater than that of O2, which accounted for the observed voltage decrease and slight current redistribution. The cell performance partially recovered when the NO2 injection was stopped. The long-term operation of the fuel cells resulted in cell performance degradation. XPS analyses of Fe/N/C electrodes revealed that the performance decrease was due to catalyst degradation and ionomer oxidation. The latter was accelerated in the presence of air contaminants. The details of the spatial performance and electrochemical impedance spectroscopy results are presented and discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (93)

Show source-provided references
1. Spendelow · 2014
2. A new fuel cell cathode catalyst10.1038/2011212a0 ↗
3. Recent advances in non-precious metal catalysis for oxygen reduction reaction in PEFCs10.1039/C0EE00011F ↗
4. High-performance electrocatalysts for oxygen reduction derived from polyaniline, iron and cobalt10.1126/science.1200832 ↗
5. Iron-based catalysts with improved oxygen reduction activity in PEFC10.1126/science.1170051 ↗
6. Fe-N-C oxygen reduction fuel cell catalyst derived from carbendazim: synthesis, structure and reactivity10.1002/aenm.201301735 ↗
7. The effects of battlefield contaminants on PEMFC performance10.1016/S0378-7753(99)00341-9 ↗
8. Mepsted · 2001
9. A review of PEM hydrogen fuel cell contamination: impacts, mechanisms, and mitigation10.1016/j.jpowsour.2006.12.012 ↗
10. The impact of air contaminants on PEMFC performance10.1016/j.jpowsour.2007.12.091 ↗
11. Effects of atmospheric trace species on the oxygen reduction reaction on the production of H2O210.1149/1.2981931 ↗
12. Effect of air contaminants on electrolyte degradation in PEMFC10.1149/1.3210634 ↗
13. The effect of ambient contamination on PEMFC performance10.1016/j.jpowsour.2006.12.103 ↗
14. Assessing durability of cathodes exposed to common air impurities10.1016/j.jpowsour.2004.06.036 ↗
15. Effects of contaminants of catalyst activity
16. The effect of mine conditions on the performance of a PEM fuel cell10.1016/j.jpowsour.2004.02.026 ↗
17. Deactivation of Pt/VC PEMFC cathodes by SO2, H2S and COS10.1016/j.jpowsour.2008.11.072 ↗
18. Influence of SO2 concentration and relative humidity on electrode poisoning in PEMFC10.1299/jtst.7.619 ↗
19. Effect of SO2 on the performance of the cathode of a PEM fuel cell at 0.5–0.7 V10.1149/1.3236650 ↗
20. Effect, mechanism and recovery of NOx poisoning on oxygen reduction reaction at Pt/C catalysts10.1016/j.jpowsour.2010.07.091 ↗
21. Oxygen reduction reaction on Pt/carbon fuel cell catalyst in the presence of trace quantities of ammonium ions: an RRDE study10.1016/j.ijhydene.2011.12.040 ↗
22. Diagnosis of contamination introduced by ammonia at the cathode in a PEMFC10.1016/j.ijhydene.2012.05.125 ↗
23. The effect of nitrogen oxides in air on the performance of PEMFC10.1016/j.electacta.2005.11.018 ↗
24. Effect of ammonium ion distribution on Nafion conductivity10.1016/j.jpowsour.2010.07.080 ↗
25. O2 and CO binding to tetraaza-tripodal-capped iron (II) porphyrins10.1021/ic0514703 ↗
26. Congruent multiple Michael addition for the synthesis of biomimetic heme analogues10.1021/ja00085a083 ↗
27. In situ X-ray absorption of a carbon monoxide – iron porphyrin adduct adsorbed on high-area carbon in an aqueous electrolyte10.1021/jp973124f ↗
28. Electrochemical evaluation of porous non-platinum oxygen reduction catalysts for PEFC10.1002/fuce.200800089 ↗
29. Does CO poison Fe-based catalysts for ORR?10.1016/j.elecom.2010.02.016 ↗
30. Phenylenediamine-based FeNx/C catalysts with high activity for oxygen reduction in acid media and its active-site probing10.1021/ja505777v ↗
31. The effects of cyanide on the electrochemical properties of transition metal macrocycles for oxygen reduction in alkaline solutions10.1016/0022-0728(91)85233-F ↗
32. Biologically inspired highly durable iron phthalocyanine catalysts for ORR in PEMFC10.1021/ja106217u ↗
33. Poisoning the ORR on carbon-supported Fe and Cu electrocatalysts: evidence for metal-centered activity10.1021/jz1016284 ↗
34. Iron encapsulated within pod-like carbon nanotubes for ORR10.1002/anie.201204958 ↗
35. Investigation of sulfur poisoning of CNx oxygen reduction catalysts for PEMFC10.1016/j.jcat.2011.09.027 ↗
36. Use of CO and cyanide to probe the active sites on nitrogen-doped carbon catalysts for oxygen reduction10.1016/j.apcatb.2011.11.029 ↗
37. Current distribution of a PEMFC under CO poisoning10.1149/1.3210641 ↗
38. Measurement and modeling of carbon monoxide poisoning distribution within a polymer electrolyte fuel cell10.1016/j.ijhydene.2007.01.019 ↗
39. The influence of CO2, CO and air bleed on the current distribution of a polymer electrolyte fuel cell10.1016/j.ijhydene.2008.02.002 ↗
40. The influence of CO on the current density distribution of high temperature polymer electrolyte membrane fuel cells10.1016/j.electacta.2011.08.039 ↗
41. The electro-oxidation of H2, CO in a model PEN fuel cell: oscillations, chaos, pulses10.1149/2.002306jes ↗
42. Spatial PEMFC performance under CO poisoning at a low concentration using a segmented cell system10.1016/j.jpowsour.2012.07.015 ↗
43. Study of low concentration CO poisoning of Pt anode in a proton exchange membrane fuel cell using spatial electrochemical impedance spectroscopy10.1016/j.jpowsour.2014.06.146 ↗
44. Study of acetylene poisoning of Pt cathode on proton exchange membrane fuel cell spatial performance using a segmented cell system10.1016/j.jpowsour.2015.04.073 ↗
45. Metal oxides/CNT nano-composite catalysts for oxygen reduction/oxygen evolution in alkaline media10.1016/j.apcatb.2014.08.033 ↗
46. Anode catalysts for direct hydrazine fuel cells: from laboratory test to an electric vehicle10.1002/anie.201404734 ↗
47. Self-supported PdxBi catalysts for the electooxidation of glycerol in alkaline media10.1021/ja412429f ↗
48. Systematic study of back pressure and anode stoichiometry effects on spatial PEMFC performance distribution10.1016/j.electacta.2011.07.058 ↗
49. In-situ methods for the determination of current distributions in PEM fuel cells10.1016/S0013-4686(98)00137-6 ↗
50. A new technique for two-dimensional current distribution measurements in electrochemical cells10.1023/A:1004047412066 ↗
51. A printed circuit board approach to measuring current distribution in a fuel cell10.1023/A:1003206513954 ↗
52. Further refinements in the segmented cell approach o diagnosing performance in polymer electrolyte fuel cells10.1016/S0378-7753(03)00533-0 ↗
53. Application of a segmented cell setup to detect pinhole and catalyst loading defects in PEMFCs10.1016/j.electacta.2012.04.138 ↗
54. Catalysts for low temperature fuel cells10.1595/003214002X461314 ↗
55. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
56. Errata: generalized gradient approximation made simple
57. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
58. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
59. Ab initio molecular dynamics for liquid metals10.1103/PhysRevB.47.558 ↗
60. Ab initio molecular-dynamics simulation of the liquid-metal–amorphous-semiconductor transition in germanium10.1103/PhysRevB.49.14251 ↗
61. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
62. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
63. Special points for Brillouin-zone integration10.1103/PhysRevB.13.5188 ↗
64. Improved tetrahedron method for Brillouin-zone integrations10.1103/PhysRevB.49.16223 ↗
65. Structure of graphite by neutron diffraction10.1038/258136a0 ↗
66. Stability, Electronic and magnetic properties of in-plane defects in graphene: a first-principles study10.1021/jp2121609 ↗
67. Computational and experimental evidence for a new TM–N3/C moiety family in non-PGM electrocatalysts10.1039/C5CP02230D ↗
68. A density functional theory study of oxygen reduction reaction on non-PGM Fe–Nx–C electrocatalysts10.1039/c4cp01634c ↗
69. Density functional theory study of Ni–Nx/C electrocatalyst for oxygen reduction in alkaline and acidic media10.1021/jp3044708 ↗
70. Computational and experimental evidence for a new TM–N3/C moiety family in non-PGM electrocatalysts10.1039/C2CP42609A ↗
71. A carbon-nanotube-supported graphene-rich non-precious metal oxygen reduction catalyst with enhanced performance durability10.1039/c3cc39121c ↗
72. Nano-structured non-platinum catalysts for automotive fuel cell application10.1016/j.nanoen.2015.07.002 ↗
73. Characterization of polymer electrolyte fuel cells using AC impedance spectroscopy10.1149/1.1836485 ↗
74. Electrochemical impedance of the cathode catalyst layer in polymer electrolyte fuel cells10.1016/S0022-0728(99)00335-6 ↗
75. Measurement of catalyst layer electrolyte resistance in PEFCs using electrochemical impedance spectroscopy10.1149/1.1888367 ↗
76. Ionic conductivity of PEMFC electrodes. Effect of Nafion loading10.1149/1.1611493 ↗
77. Degradation of Fe/N/C catalysts upon high polarization in acid medium10.1039/C4CP02882A ↗
78. Fuel cell reactant supply – effects of reactant contaminants
79. Quantitative analysis of the performance impact of low-level CO exposure in PEMFC10.1016/j.jpowsour.2012.11.062 ↗
80. Mechanistic investigations of NO2 impact on ORR in PEMFC: a coupled experimental and multi-scale modeling approach10.1149/1.3210715 ↗
81. Adsorption and reactivity of nitrogen oxides (NO2, NO, N2O) on Fe-zeolites10.1016/j.jcat.2009.03.012 ↗
82. Analysis of the adsorption state and desorption kinetics of NO2 over Fe-zeolite catalyst FT-IR and temperature-programmed desorption10.1039/b923938c ↗
83. NOx conversion properties of a novel material: iron nanoparticles stabilized in carbon10.1016/j.apcatb.2014.11.013 ↗
84. Efficient NO adsorption and release at Fe3+ sites in Fe/TiO2 nanoparticles10.1039/c1ee01184g ↗
85. NO adsorption on ex-framework [Fe,X] MFI catalysts: novel IR bands and evaluation of assignments10.1023/A:1015456308687 ↗
86. Structure and nuclearity of active sites in Fe-zeolites: comparison with iron sites in enzymes and homogeneous catalysts10.1039/b703445h ↗
87. Adsorption properties of iron and iron-manganese catalysts investigated by in-situ diffuse reflectance FTIR spectroscopy10.1021/jp000065o ↗
88. Non-precious metal fuel cell cathodes: catalyst development and electrode structure design
89. Influence of Nafion ionomer on carbon support10.1007/s10800-010-0169-8 ↗
90. Structural selectivity of CO oxidation on Fe/N/C catalysts10.1021/jp304097m ↗
91. Density functional theory calculations of XPS binding energy shift for nitrogen-containing graphene-like structures10.1039/c3cc40324f ↗
92. XPS structural studies of nano-composite non-platinum electrocatalysts for polymer electrolyte fuel cells10.1007/s11244-007-9002-y ↗
93. Predictive modeling of electrocatalyst structure based on structure-to-property correlations of x-ray photoelectron spectroscopic and electrochemical measurements10.1021/la801089m ↗