Effect of organic acids and nano-sized ceramic doping on PEO-based solid polymer electrolytes
Source abstract
Abstract
Abstract Composite solid polymer electrolytes (CSPEs) consisting of polyethyleneoxide (PEO), LiClO 4 , organic acids (malonic, maleic, and carboxylic acids), and/or Al 2 O 3 were prepared in acetonitrile. CSPEs were characterized by Brewster Angle Microscopy (BAM), thermal analysis, ac impedance, cyclic voltammetry, and tested for charge–discharge capacity with the Li or LiNi 0.5 Co 0.5 O 2 electrodes coated on stainless steel (SS). The morphologies of the CSPE films were homogeneous and porous. The differential scanning calorimetric (DSC) results suggested that performance of the CSPE film was highly enhanced by the acid and inorganic additives. The composite membrane doped with organic acids and ceramic showed good conductivity and thermal stability. The ac impedance data, processed by non-linear least square (NLLS) fitting, showed good conducting properties of the composite films. The ionic conductivity of the film consisting of (PEO) 8 LiClO 4 :citric acid (99.95:0.05, w/w%) was 3.25 × 10 −4 S cm −1 and 1.81 × 10 −4 S cm −1 at 30 °C. The conductivity has further improved to 3.81 × 10 −4 S cm −1 at 20 °C by adding 20 w/w% Al 2 O 3 filler to the (PEO) 8 LiClO 4 + 0.05% carboxylic acid composite. The experimental data for the full cell showed an upper limit voltage window of 4.7 V versus Li/Li + for CSPE at room temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Wright · Br. Polym. J. · 1975 · 7 · 31910.1002/pi.4980070505 ↗
2. Fenton · J. Polym. · 1973 · 14 · 58910.1016/0032-3861(73)90146-8 ↗
3. M.B. Armand, J.M. Chabagno, M. Duclot, Second International Meeting on Solid Electrolytes, St. Andrew, Scotland, September 20–22, Extended Abstracts, 1978.
4. Rhoo · Electrochim. Acta · 1997 · 42 · 157110.1016/S0013-4686(96)00318-0 ↗
5. Starkey · Electrochim. Acta · 1997 · 42 · 47110.1016/S0013-4686(96)00244-7 ↗
6. Prosini · Electrochem. Commun. · 2000 · 4410.1016/S1388-2481(99)00138-1 ↗
7. Nookala · J. Power Sources · 2002 · 111 · 16510.1016/S0378-7753(02)00303-8 ↗
8. Qian · Electrochim. Acta · 2001 · 46 · 182910.1016/S0013-4686(00)00723-4 ↗
9. Golodnitsky · Solid State Ion. · 2002 · 147 · 14110.1016/S0167-2738(01)01036-0 ↗
10. Honma · Solid State Ion. · 1999 · 118 · 2910.1016/S0167-2738(98)00450-0 ↗
11. Ennari · Polymer · 2002 · 43 · 542710.1016/S0032-3861(02)00432-9 ↗
12. Weston · Solid State Ion. · 1982 · 7 · 8110.1016/0167-2738(82)90073-X ↗
13. Capuano · J. Electrochem. Soc. · 1991 · 138 · 191810.1149/1.2085900 ↗
14. Golodnitsky · Solid State Ion. · 2002 · 147 · 14110.1016/S0167-2738(01)01036-0 ↗
15. Croce · Nature · 1998 · 394 · 45610.1038/28818 ↗
16. Kreuer · Solid State Ion. · 2000 · 136–137 · 14910.1016/S0167-2738(00)00301-5 ↗
17. Ennari · Polymer · 2000 · 41 · 405710.1016/S0032-3861(99)00642-4 ↗
18. Nakajima · Solid State Ion. · 2002 · 148 · 60710.1016/S0167-2738(02)00127-3 ↗
19. Borghini · J. Electrochem. Soc. · 1995 · 142 · 211810.1149/1.2044260 ↗
20. Appetecchi · Electrochim. Acta · 2000 · 45 · 148110.1016/S0013-4686(99)00363-1 ↗
21. Valle · Electrochim. Acta · 1992 · 37 · 157910.1016/0013-4686(92)80115-3 ↗
22. Scrosati · J. Electrochem. Soc. · 2000 · 147 · 171810.1149/1.1393423 ↗
23. Croce · Solid State Ion. · 2000 · 135 · 4710.1016/S0167-2738(00)00329-5 ↗
24. Appetecchi · Electrochim. Acta · 2000 · 45 · 481
25. Peled · J. Electrochem. Soc. · 1979 · 126 · 204710.1149/1.2128859 ↗
26. Polcharski · Solid State Ion. · 1988 · 28–30 · 973
27. Munichandraiah · J. Appl. Electrochem. · 1995 · 25 · 85710.1007/BF00772205 ↗
28. Kumar · J. Power Sources · 1994 · 52 · 26110.1016/0378-7753(94)02147-3 ↗