Effects of Fe2P and Li3PO4 additives on the cycling performance of LiFePO4/C composite cathode materials
Source abstract
Abstract
Abstract In this study, a solution method was employed to synthesize LiFePO 4 -based powders with Li 3 PO 4 and Fe 2 P additives. The composition, crystalline structure, and morphology of the synthesized powders were investigated by using ICP-OES, XRD, TEM, and SEM, respectively. The electrochemical properties of the powders were investigated with cyclic voltammetric and capacity retention studies. The capacity retention studies were carried out with LiFePO 4 /Li cells and LiFePO 4 /MCMB cells comprised LiFePO 4 -based materials prepared at various temperatures from a stoichiometric precursor. Among all of the synthesized powders, the samples synthesized at 750 and 775 °C demonstrate the most promising cycling performance with C /10, C /5, C /2, and 1 C rates. The sample synthesized at 775 °C shows initial discharge capacity of 155 mAh g −1 at 30 °C with C /10 rate. From the results of the cycling performance of LiFePO 4 /MCMB cells, it is found that 800 °C sample exhibited higher polarization growth rate than 700 °C sample, though it shows lower capacity fading rate than 700 °C sample. For Fe 2 P containing samples, the diffusion coefficient of Li + ion increases with increasing amount of Fe 2 P, however, the sample synthesized at 900 °C shows much lower Li + ion diffusion coefficient due to the hindrance of Fe 2 P layer on the surface of LiFePO 4 particles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Padhi · J. Electrochem. Soc. · 1997 · 144 · 160910.1149/1.1837649 ↗
2. Andersson · J. Power Sources · 2001 · 97/98 · 49810.1016/S0378-7753(01)00633-4 ↗
3. Ravet · J. Power Sources · 2001 · 97/98 · 50310.1016/S0378-7753(01)00727-3 ↗
4. Prosini · Electrochim. Acta · 2001 · 46 · 351710.1016/S0013-4686(01)00631-4 ↗
5. Huang · Solid State Lett. · 2001 · 4 · 17010.1149/1.1396695 ↗
6. Chen · J. Electrochem. Soc. · 2002 · 149 · 118410.1149/1.1498255 ↗
7. Yamada · J. Electrochem. Soc. · 2001 · 148 · 22410.1149/1.1348257 ↗
8. Chung · Nat. Mater. · 2002 · 1 · 12310.1038/nmat732 ↗
9. Shi · Phys. Rev. B · 2003 · 68 · 19510810.1103/PhysRevB.68.195108 ↗
10. Wang · Electrochim. Acta · 2005 · 50 · 295510.1016/j.electacta.2004.11.045 ↗
11. Wu · J. Power Sources · 2009 · 189 · 44010.1016/j.jpowsour.2009.01.015 ↗
12. Rho · J. Electrochem. Soc. · 2007 · 154 · 28310.1149/1.2433539 ↗
13. Hu · J. Electrochem. Soc. · 1977 · 124 · 124010.1149/1.2133537 ↗
14. Kadoma · Electrochim. Acta · 2010 · 55 · 103410.1016/j.electacta.2009.09.029 ↗
15. Herle · Nat. Mater. · 2004 · 3 · 14710.1038/nmat1063 ↗
16. Xu · J. Power Sources · 2006 · 160 · 57010.1016/j.jpowsour.2006.01.042 ↗
17. Kim · J. Power Sources · 2006 · 163 · 14410.1016/j.jpowsour.2006.02.071 ↗
18. Konarova · J. Power Sources · 2009 · 194 · 102910.1016/j.jpowsour.2009.06.046 ↗
19. Tarascon · Nature · 2001 · 414 · 35910.1038/35104644 ↗
20. Takahashi · Solid State Ionics · 2002 · 148 · 28310.1016/S0167-2738(02)00064-4 ↗
21. Song · J. Power Sources · 2008 · 180 · 54610.1016/j.jpowsour.2008.01.079 ↗