journal article·2015-11

Thermal conductivity of microporous layers: Analytical modeling and experimental validation

Mehdi Andisheh-Tadbir, Erik Kjeang, Majid Bahrami

Publisher page

Abstract

Abstract A new compact relationship is developed for the thermal conductivity of the microporous layer (MPL) used in polymer electrolyte fuel cells as a function of pore size distribution, porosity, and compression pressure. The proposed model is successfully validated against experimental data obtained from a transient plane source thermal constants analyzer. The thermal conductivities of carbon paper samples with and without MPL were measured as a function of load (1–6 bars) and the MPL thermal conductivity was found between 0.13 and 0.17 W m −1 K −1 . The proposed analytical model predicts the experimental thermal conductivities within 5%. A correlation generated from the analytical model was used in a multi objective genetic algorithm to predict the pore size distribution and porosity for an MPL with optimized thermal conductivity and mass diffusivity. The results suggest that an optimized MPL, in terms of heat and mass transfer coefficients, has an average pore size of 122 nm and 63% porosity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Thermal properties of materials · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Two-phase transport in polymer electrolyte fuel cells with bilayer cathode gas diffusion media10.1149/1.1938067 ↗
2. Effects of microporous layers in polymer electrolyte fuel cells10.1149/1.1861194 ↗
3. Mench · 2012
4. Effect of Polytetrafluoroethylene (PTFE) and micro porous layer (MPL) on thermal conductivity of fuel cell gas diffusion layers: modeling and experiments10.1016/j.jpowsour.2013.09.136 ↗
5. Optimal microporous layer for proton exchange membrane fuel cell10.1016/j.jpowsour.2010.03.041 ↗
6. Influence of the microporous layer on carbon corrosion in the catalyst layer of a polymer electrolyte membrane fuel cell10.1016/j.jpowsour.2012.04.086 ↗
7. Development of a novel hydrophobic/hydrophilic double micro porous layer for use in a cathode gas diffusion layer in PEMFC10.1016/j.ijhydene.2011.04.038 ↗
8. Enhancement of proton exchange membrane fuel cell performance by doping microporous layers of gas diffusion layers with multiwall carbon nanotubes10.1016/j.jpowsour.2012.07.078 ↗
9. Microporous layer coated gas diffusion layers for enhanced performance of polymer electrolyte fuel cells10.1016/j.jpowsour.2009.10.089 ↗
10. Effect of different substrates, inks composition and rheology on coating deposition of microporous layer (MPL) for PEM-FCs10.1016/j.cattod.2009.07.023 ↗
11. An analytical relationship for calculating the effective diffusivity of micro-porous layers10.1016/j.ijhydene.2015.06.067 ↗
12. Micro-porous layer stochastic reconstruction and transport parameter determination10.1016/j.jpowsour.2015.02.034 ↗
13. A customized framework for 3-D morphological characterization of microporous layers10.1016/j.electacta.2013.04.103 ↗
14. Experimental measurement of effective diffusion coefficient of gas diffusion layer/microporous layer in PEM fuel cells10.1016/j.electacta.2011.12.110 ↗
15. Thermal conductivity and temperature profiles of the micro porous layers used for the polymer electrolyte membrane fuel cell10.1016/j.ijhydene.2013.04.140 ↗
16. 3D reconstruction of a gas diffusion layer and a microporous layer10.1016/j.memsci.2010.01.031 ↗
17. A statistically-based thermal conductivity model for fuel cell gas diffusion layers10.1016/j.jpowsour.2013.01.086 ↗
18. Calculation of various physics constants in heterogenous substances I dielectricity constants and conductivity of mixed bodies from isotropic substances10.1002/andp.19354160705 ↗
19. Prediction of transport processes within porous media: diffusive flow processes within a homogeneous swarm of spherical particles10.1002/aic.690190116 ↗
20. Effect of pore structure, randomness and size on effective mass diffusivity10.1002/aic.690480104 ↗
21. Ordinary and transition regime diffusion in random fiber structures10.1002/aic.690390304 ↗
22. Correlation for the effective gas diffusion coefficient in carbon paper diffusion media10.1021/ef900653x ↗
23. Carslaw · 1959
24. Kaganer · 1969
25. Thermal joint resistances of conforming rough surfaces with gas-filled gaps
26. Effective thermal conductivity of various filling materials for vacuum insulation panels10.1016/j.ijheatmasstransfer.2009.06.029 ↗
27. The mean free path in air10.1016/0021-8502(88)90219-4 ↗
28. Modified Zehner–Schlunder models for stagnant thermal conductivity of porous media10.1016/0017-9310(94)90392-1 ↗
29. Johnson · 1985
30. Silvia · 2015
31. Taylor · 1997
32. Through-plane thermal conductivity of the microporous layer in a polymer electrolyte membrane fuel cell10.1016/j.ijhydene.2011.12.012 ↗
33. 2012