High-voltage structural evolution and its kinetic consequences for the Na4MnV(PO4)3 sodium-ion battery cathode material
Source abstract
Abstract
Abstract The recently demonstrated possibility of high-voltage extraction of more than 2 Na ions per Na4MnV(PO4)3 formula unit is considered as a possible way to increase the specific energy of this material, which would open up prospects for its application in sodium-ion batteries. However, for the Na4MnV(PO4)3 material and for a wide group of related NASICON-structured materials, high-voltage Na extraction was demonstrated to lead to a rapid decrease in capacity and a sharp increase in hysteresis between the charge and discharge curves. In this work, we use electrochemical and structural analysis to elucidate the reasons for the degradation observed after deep desodiation of Na4MnV(PO4)3. X-ray diffraction analysis of the electrodes after cycling demonstrates that a phase transformation is initiated when the anodic potential limit exceeds 3.8 V, which results in the formation of distorted NASICON-type phases and gradual amorphization. X-ray absorption spectroscopy studies suggest that the observed detrimental phase transitions might be triggered by the changes in the local environment of oxidized vanadium, which destabilize the structure. We thus demonstrate that the degradation of the Na4MnV(PO4)3 material is of thermodynamic origin, with its consequences being reflected in a dramatically decreased de/intercalation rates and a rapid deterioration in the material performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Superior electrochemical performance and storage mechanism of Na3V2(PO4)3 cathode for room-temperature sodium-ion batteries10.1002/aenm.201200558 ↗
2. Improving the energy density of Na3V2(PO4)3-based positive electrodes through V/Al substitution10.1039/C5TA03528G ↗
3. A chemical map of NaSICON electrode materials for sodium-ion batteries10.1039/D0TA10688G ↗
4. Optimization of the compositions of polyanionic sodium-ion battery cathode NaFe2−xVx(PO4)(SO4)210.1016/j.jpowsour.2020.228417 ↗
5. Enhanced low-temperature sodium storage kinetics in a NaTi2(PO4)3@C nanocomposite10.1016/j.jpowsour.2020.228735 ↗
6. K+ and Mg2+ co-doped bipolar Na3V2(PO4)3: an ultrafast electrode for symmetric sodium ion full cell10.1016/j.jpowsour.2020.228149 ↗
7. Insights into the enhanced sodium storage property and kinetics based on the Zr/Si codoped Na3V2(PO4)3/C cathode with superior rate capability and long lifespan10.1016/j.jpowsour.2020.228632 ↗
8. Does size matter – what other factors are limiting the rate performance of Na3V2(PO4)3 cathode in sodium-ion batteries10.1016/j.jpowsour.2017.10.075 ↗
9. A NASICON-type positive electrode for Na batteries with high energy density: Na4MnV(PO4)310.1002/smtd.201800218 ↗
10. Rational architecture design enables superior Na storage in greener NASICON-Na4MnV(PO4)3 cathode10.1002/aenm.201801418 ↗
11. Enhancing Na+ extraction limit through high voltage activation of the NASICON-type Na4MnV(PO4)3 cathode10.1021/acsaem.8b01269 ↗
12. High capacity and high-rate NASICON-Na3.75V1.25Mn0.75(PO4)3 cathode for Na-ion batteries via modulating electronic and crystal structures10.1002/aenm.201902918 ↗
13. Na4MnV(PO4)3-rGO as Advanced cathode for aqueous and non-aqueous sodium ion batteries10.1016/j.jpowsour.2019.04.080 ↗
14. Understanding the superior sodium-ion storage in a novel Na3.5Mn0.5V1.5(PO4)3 cathode10.1016/j.ensm.2019.05.041 ↗
15. Phase boundary propagation kinetics predominately limit the rate capability of NASICON-type Na3+xMnxV2-x(PO4)3 (0≤x≤1) materials10.1016/j.electacta.2020.136761 ↗
16. Encapsulation of Na4MnV(PO4)3 in robust dual-carbon framework rendering high-energy, durable sodium storage
17. Impact of Mg2+ and Al3+ substitutions on the structural and electrochemical properties of NASICON-NaxVMn0.75M0.25(PO4)3 (M = Mg and Al) cathodes for sodium-ion batteries10.1002/smll.202003973 ↗
18. Multidimensional Na4VMn0.9Cu0.1(PO4)3/C cotton-candy cathode materials for high energy Na-ion batteries10.1039/D0TA03767B ↗
19. Electrochemical properties and evolution of the phase transformation behavior in the NASICON-type Na3+xMnxV2-x(PO4)3 (0≤x≤1) cathodes for Na-ion batteries10.1016/j.jpowsour.2020.228231 ↗
20. Effect of the Mn/V ratio to optimize the kinetic properties of Na3+xMnxV1-xCr(PO4)3 positive electrode for sodium-ion batteries10.1016/j.electacta.2021.137982 ↗
21. On the benefits of Cr substitution on Na4MnV(PO4)3 to improve the high voltage performance as cathode for sodium-ion batteries10.1016/j.jpowsour.2021.229811 ↗
22. Improvement in the energy density of Na3V2(PO4)3 by Mg substitution10.1002/celc.201700540 ↗
23. A high-energy NASICON-type cathode material for Na-ion batteries10.1002/aenm.201903968 ↗
24. A novel NASICON-typed Na4VMn0.5Fe0.5(PO4)3 cathode for high-performance Na-ion batteries10.1002/aenm.202100729 ↗
25. Exploring highly reversible 1.5-electron reactions (V(3+)/V(4+)/V(5+)) in Na3VCr(PO4)3 cathode for sodium-ion batteries10.1021/acsami.7b13018 ↗
26. Counter-intuitive structural instability aroused by transition metal migration in polyanionic sodium ion host10.1002/aenm.202003256 ↗
27. A profile refinement method for nuclear and magnetic structures10.1107/S0021889869006558 ↗
28. Full-profile refinement by derivative difference minimization10.1107/S0021889804015638 ↗
29. The hard X-ray absorption beamline of the ALBA CELLS synchrotron10.1080/23311940.2016.1231987 ↗
30. Larch: an analysis package for XAFS and related spectroscopies10.1088/1742-6596/430/1/012007 ↗
31. Discussion of the potential step method for the determination of the diffusion coefficients of guest species in host materials10.1016/S0022-0728(01)00691-X ↗
32. Solvent effect on the kinetics of lithium ion intercalation into LiCoO210.1016/j.electacta.2017.01.040 ↗
33. Electrochemical patterns of phase transforming intercalation materials: diagnostic criteria for the case of slow nucleation rate control10.1149/2.1241904jes ↗
34. The thermodynamic origin of hysteresis in insertion batteries10.1038/nmat2730 ↗
35. Metal-ion coupled electron transfer kinetics in intercalation-based transition metal oxides10.1002/aenm.201903933 ↗
36. Charge transfer processes in the course of metal-ion electrochemical intercalation10.1016/j.coelec.2019.10.006 ↗
37. Structural evolution at the oxidative and reductive limits in the first electrochemical cycle of Li1.2Ni0.13Mn0.54Co0.13O210.1038/s41467-020-14927-4 ↗
38. Practical assessment of anionic redox in Li-rich layered oxide cathodes: a mixed blessing for high energy Li-ion batteries10.1149/2.0531614jes ↗
39. K-edge absorption spectra of selected vanadium compounds10.1103/PhysRevB.30.5596 ↗
40. Lithiation of V2O3(SO4)2 – a flexible insertion host10.1039/D0TA06608G ↗
41. Solution X-ray absorption spectroscopy (XAS) for analysis of catalytically active species in reactions with ethylene by homogeneous (Imido)vanadium(V) complexes—Al cocatalyst systems10.3390/catal9121016 ↗
42. In situ Mn K-edge X-ray absorption spectroscopy studies of electrodeposited manganese oxide films for electrochemical capacitors10.1021/jp063130o ↗
43. X-ray absorption spectroscopy study of Mn2O3 and Mn3O4 nanoparticles supported on mesoporous silica SBA-1510.1142/S1793617908000112 ↗
44. Electrochemical and structural investigation of the mechanism of irreversibility in Li3V2(PO4)3 cathodes10.1021/acs.jpcc.6b00408 ↗