journal article·2021-07Open access

Capacity fade characteristics of nickel-based lithium-ion secondary battery after calendar deterioration at 80 °C

Yating Du, Kosuke Fujita, Sayoko Shironita, Yoshitsugu Sone, Eiji Hosono, Daisuke Asakura, Minoru Umeda

Abstract

In this study, we evaluated the calendar deterioration behavior of nickel-based lithium-ion secondary batteries by storing them at 80 °C for different durations. The results indicate that the battery capacity decreased with the increasing number of storage days in a high-temperature environment. From the differential capacity curves, we found that the change in the overvoltage , which was caused by the electrode reaction, that appeared at approximately 4.2 V was most significant. To analyze this phenomenon, electrochemical impedance spectroscopy of the deteriorated battery was measured at 4.2 V, and it was confirmed that the cathode-based resistance of the battery increased significantly at this potential. Furthermore, post-mortem analysis revealed that the cathode active material of the tested batteries clearly deteriorated; however, no significant change in the active material in the anode was observed. Therefore, it is considered that the cathode materials of nickel-based lithium-ion secondary batteries deteriorate by storing at 80 °C, thereby resulting in reduced battery capacity and increased cathode component resistance after storing at high temperatures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Storage fading of a commercial 18650 cell comprised with NMC/LMO cathode and graphite anode10.1016/j.jpowsour.2017.03.002 ↗
2. Electrochemical‐calorimetric studies of lithium‐ion cells10.1149/1.1838509 ↗
3. Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: a review10.1016/j.enconman.2017.08.016 ↗
4. Cycling a lithium metal anode at 90 °C in a liquid electrolyte10.1002/anie.202002711 ↗
5. Thermal stability of materials used in lithium-ion cells
6. Study of thermal deterioration of lithium-ion secondary cell using an accelerated rate calorimeter (ARC) and AC impedance method10.1016/j.jpowsour.2011.09.067 ↗
7. Optimized nonflammable concentrated electrolytes by introducing a low-dielectric diluent10.1021/acsami.9b12709 ↗
8. Impedance change and capacity fade of lithium nickel manganese cobalt oxide-based batteries during calendar aging10.1016/j.jpowsour.2017.03.090 ↗
9. Surface state change of lithium metal anode in full cell during long term cycles10.5796/electrochemistry.18-00080 ↗
10. Fatigue in high-energy commercial Li batteries while cycling at standard conditions: an in-situ neutron powder diffraction study10.1021/acsaem.0c00779 ↗
11. Enabling stable lithium metal anode through electrochemical kinetics manipulation10.1002/adfm.201904629 ↗
12. Thermal characteristics of 80° C storage-degraded 18650-type lithium-ion secondary cells10.1016/j.jpowsour.2019.01.087 ↗
13. In situ analysis of high temperature characteristics of prismatic polymer lithium-ion batteries10.1007/s10800-004-2459-5 ↗
14. Quick testing of batteries in lithium-ion battery packs with impedance-measuring technology10.1016/j.jpowsour.2003.09.045 ↗
15. Effects of Mg-substitution in Li (Ni, Co, Al) O2 positive electrode materials on the crystal structure and battery performance10.1016/j.jpowsour.2007.06.035 ↗
16. A nonlinear least squares fit procedure for analysis of immittance data of electrochemical systems10.1016/0167-2738(86)90031-7 ↗
17. Performance of LiNiCoO2 materials for advanced lithium-ion batteries10.1016/j.jpowsour.2005.03.091 ↗
18. Synthesis of LiNiO2 powders by a sol-gel method10.1023/A:1018532313681 ↗
19. The LiNiO2 solid solution as a cathode material for rechargeable lithium batteries10.1016/0378-7753(94)02094-J ↗
20. Cation distribution and chemical deintercalation of Li1-XNi1+XO210.1016/0025-5408(90)90028-Z ↗
21. James · 1954
22. The study of surface phenomena related to electrochemical lithium intercalation into LixMOy host materials (M= Ni, Mn)10.1149/1.1393357 ↗
23. Surface characterization of electrodes from high power lithium-ion batteries10.1149/1.1505636 ↗
24. Laminated thin Li-ion batteries using a liquid electrolyte10.1149/1.1420704 ↗
25. Mechanism of gas build-up in a Li-ion cell at elevated temperature10.1016/j.jpowsour.2004.01.042 ↗
26. Chemical versus electrochemical electrolyte oxidation on NMC111, NMC622, NMC811, LNMO, and conductive carbon10.1021/acs.jpclett.7b01927 ↗
27. Oxygen, hydrogen, ethylene and CO2 development in lithium-ion batteries10.1016/j.jpowsour.2007.06.182 ↗
28. Gas evolution in lithium-ion batteries: solid versus liquid electrolyte10.1021/acsami.0c02872 ↗
29. Origin of carbon dioxide evolved during cycling of nickel-rich layered NCM cathodes10.1021/acsami.8b13158 ↗
30. Suppression of toxic compounds produced in the decomposition of lithium-ion battery electrolytes10.1149/1.1738551 ↗
31. In situ study on CO2 evolution at lithium-ion battery cathodes10.1016/j.jpowsour.2006.04.087 ↗
32. Synthesis of zirconium-based material-coated LiNi0.8Co0.2O2 cathode using a new coating method10.1143/JJAP.51.105202 ↗
33. Surface characterization of electrodes from high power lithium-ion batteries10.1149/1.1505636 ↗
34. Investigation and improvement on the storage property of LiNi0.8Co0.2O2 as a cathode material for lithium-ion batteries10.1016/j.jpowsour.2006.07.028 ↗