journal article·2020-12

Robust polymer electrolyte membrane fuel cell temperature tracking control based on cascade internal model control

Fengxiang Chen, Jieran Jiao, Zhongjun Hou, Wei Cheng, Jun Cai, Zenggang Xia, Jie Chen

Publisher page

Abstract

Abstract To optimize fuel cell system efficiency, compared with the regulation control of temperature, the latest engineering practice is more inclined to perform tracking control. The fuel cell temperature subsystem has the characteristics of slow response and strong nonlinearity, which poses challenges to tracking control. This paper proposes a cascade internal model control (CIMC) to make the stack outlet temperature track the target value when fuel cell load currents changes. Both simulation and experiment show that the control method has good rapidity, accuracy and robustness. The Simulation results based on AMESIM® shows that the step response static errors of static points test and step signal test are all 0 °C. The response time of step signal test is around 47s. Both of the step response and dynamic response the overshooting are 0 °C without divergence. The experiment results on a real 120 kW commercial fuel cell system test bench are similar with the simulation results with 0 °C static error at different working conditions, 44s response time for step response and overshooting around 1 °C at the dynamic working condition, which is acceptable for the tested PEMFC stack.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Comparative study of fuel cell, battery and hybrid buses for renewable energy constrained areas [J]
2. A microfluidic all-vanadium photo electrochemical cell with the N-doped TiO2 photoanode for enhancing the solar energy storage [J]
3. Optimizing investments in coupled offshore wind -electrolytic hydrogen storage systems in Denmark [J]10.1016/j.jpowsour.2017.05.048 ↗
4. Flexible all-solid-state electrolytes with ordered fast Li-ion-conductive nano-pathways for rechargeable lithium batteries [J]
5. Model-based observers for internal states estimation and control of proton exchange membrane fuel cell system: a review [J]
6. Numerical and experimental investigation of baffle plate arrangement on proton exchange membrane fuel cell performance [J]
7. Comparative study of energy management strategies for hybrid proton exchange membrane fuel cell four wheel drive electric vehicle [J]
8. An optimized energy management strategy for fuel cell hybrid power system based on maximum efficiency range identification [J]
9. Investigation of the non-uniform distribution of current density in commercial-size proton exchange membrane fuel cells [J]
10. Nonlinear observation of internal states of fuel cell cathode utilizing a high-order sliding-mode algorithm [J]
11. Improved water management by alternating air flow directions in a proton exchange membrane fuel cell stack [J]
12. Sliding mode observer for proton exchange membrane fuel cell: automotive application [J]
13. Control of proton exchange membrane fuel cell system breathing based on maximum net power control strategy [J]
14. Fixed air flow-rate selection by considering the self-regulating function of low power air-cooled PEMFC stack [J]10.1016/j.ijheatmasstransfer.2020.119771 ↗
15. In-situ measurement of temperature and humidity distribution in gas channels for commercial-size proton exchange membrane fuel cells [J]
16. Design and implementation of model predictive control for an open-cathode fuel cell thermal management system [J]10.1016/j.renene.2020.03.073 ↗
17. Development of the anode bipolar plate/membrane assembly unit for air breathing PEMFC stack using silicone adhesive bonding [J]
18. Li · 2008
19. Gas-liquid two-phase flow behaviors and performance characteristics of proton exchange membrane fuel cells in a short-term microgravity environment[J]
20. Identification of performance degradations in catalyst layer and gas diffusion layer in proton exchange membrane fuel cells[J]
21. Temperature model and fuzzy control for the proton-exchange-membrane fuel cell[J]
22. Influence of temperature control on the air-cooling proton exchange fuel cell [J]
23. Temperature regulation in an evaporatively cooled proton exchange membrane fuel cell stack[J]10.1016/j.ijhydene.2015.04.086 ↗
24. Active disturbance rejection temperature control of open-cathode proton exchange membrane fuel cell [J]
25. Development of water content control system for fuel cell hybrid vehicles based on AC impedance[J]
26. Model-based temperature regulation of a PEM fuel cell system on a city bus[J]10.1016/j.ijhydene.2015.08.042 ↗
27. Adaptive thermal control for PEMFC systems with guaranteed performance[J]10.1016/j.ijhydene.2017.12.121 ↗
28. On active disturbance rejection in temperature regulation of the proton exchange membrane fuel cells[J]10.1016/j.jpowsour.2015.02.106 ↗
29. Thermal modelling approach and model predictive control of a water-cooled PEM fuel cell system[C]//IECON
30. Model based temperature controller development for water cooled PEM fuel cell systems[J]10.1016/j.ijhydene.2014.10.047 ↗
31. Temperature control of PEMFC system based on variable universe fuzzy incremental theory[J]
32. Thermal management system of water-cooled PEMFC based on OPC technology [J]
33. Control strategy of cooling system for the optimization of parasitic power of automotive fuel cell system[J]10.1016/j.ijhydene.2015.08.067 ↗
34. Advanced thermal management of automotive fuel cells using a model reference adaptive control algorithm[J]10.1016/j.ijhydene.2016.10.134 ↗
35. Sliding-mode-based temperature regulation of a proton exchange membrane fuel cell test bench[J]10.1016/j.ijhydene.2017.03.070 ↗
36. Chen · 2017
37. Control-oriented LPV modeling for the air supply system of proton exchange membrane fuel cells[J]10.1002/fuce.201700195 ↗