journal article·2021-01

High methanol resistant polyelectrolyte membrane based on semi-crystalline Poly(ether ketone) with densely sulfonated side chain for direct methanol fuel cell

Di Liu, Bo Dong, Haibo Zhang, Yunji Xie, Jinhui Pang, Zhenhua Jiang

Publisher page

Abstract

Abstract Different from the widely developed amorphous polyelectrolyte membrane materials, semi-crystalline sulfonated poly(ether ketone) (PEK-SPx) membranes composed of crystalline poly(ether ketone) main chain and densely sulfonated side chain are prepared. Wide-angle X-ray diffraction analysis indicates that these membranes manifest crystalline nature. The dimensional stability and methanol resistance of PEK-SPx membranes are greatly enhanced by introduction of semi-crystalline structure. The dimensional change in pure methanol at 60 °C and methanol permeability of PEK-SP20 membrane is only 25.9% and 36 × 10−8 cm2 s−1, respectively. In addition, coupled with excellent thermal stability, oxidative stability, good mechanical property, satisfactory proton conductivity and distinct micro-phase separation, PEK-SP20 membrane exhibits considerable single cell performance. Overall, semi-crystalline PEK-SPx membranes are a promising new type of proton exchange membranes for application in direct methanol fuel cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Membrane-based Ion Separation Techniques · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Review-electromobility: batteries or fuel cells?10.1149/2.0211514jes ↗
2. Results of a 20 000 h lifetime test of a 7 kW direct methanol fuel cell (DMFC) hybrid system - degradation of the DMFC stack and the energy storage10.1039/C4EE00749B ↗
3. Optimization of hydrogen-evolving photochemical molecular devices10.1002/anie.201409442 ↗
4. Influence of multivalent ions on renewable energy generation in reverse electrodialysis10.1039/C3EE43501F ↗
5. A review of polymer electrolyte membranes for direct methanol fuel cells10.1016/j.jpowsour.2007.03.044 ↗
6. Non-fluorinated polymer materials for proton exchange membrane fuel cells10.1146/annurev.matsci.33.022702.154657 ↗
7. Polymer electrolyte membranes for the direct methanol fuel cell: a review10.1002/polb.20861 ↗
8. Overview of hybrid membranes for direct-methanol fuel-cell applications10.1016/j.ijhydene.2009.12.054 ↗
9. Recent developments in proton exchange membranes for fuel cells10.1039/b808149m ↗
10. Recent development of polymer electrolyte membranes for fuel cells10.1021/cr200035s ↗
11. Enhancing the selectivity of Nafion membrane by incorporating a novel functional skeleton molecule to improve the performance of direct methanol fuel cells10.1039/C9TA10215A ↗
12. State of understanding of nafion10.1021/cr0207123 ↗
13. Fuel cell perfluorinated sulfonic acid membrane degradation correlating accelerated stress testing and lifetime10.1021/cr200424d ↗
14. A review on methanol crossover in direct methanol fuel cells: challenges and achievements10.1002/er.1889 ↗
15. Semi-interpenetrating polymer networks toward sulfonated poly(ether ether ketone) membranes for high concentration direct methanol fuel cell10.1016/j.cclet.2018.09.021 ↗
16. Nanoscale distribution of sulfonic acid groups determines structure and binding of water in nafion membranes10.1002/anie.201600219 ↗
17. Alternative polymer systems for proton exchange membranes (PEMs)10.1021/cr020711a ↗
18. Self-assembled highly ordered acid layers in precisely sulfonated polyethylene produce efficient proton transport10.1038/s41563-018-0097-2 ↗
19. Structurally-defined, sulfo-phenylated, oligophenylenes and polyphenylenes10.1021/jacs.5b07865 ↗
20. Semi-Interpenetrating polymer network membranes from SPEEK and BPPO for high concentration DMFC
21. Investigation of diamine cross-linker on semi-IPNs of BPPO/SPEEK membranes for direct methanol fuel cell10.1002/ente.201800274 ↗
22. Sulfophenylation of polysulfones for proton-conducting fuel cell membranes10.1002/1521-3927(20021001)23:15<896::AID-MARC896>3.0.CO;2-P ↗
23. Novel wholly aromatic sulfonated poly(arylene ether) copolymers containing sulfonic acid groups on the pendants for proton exchange membrane materials10.1021/ma070080s ↗
24. Review of advanced materials for proton exchange membrane fuel cells10.1021/ef501977k ↗
25. A comprehensive review of PBI-based high temperature PEM fuel cells10.1016/j.ijhydene.2016.09.024 ↗
26. Enhanced performance of sulfonated poly (ether ether ketone) membranes by blending fully aromatic polyamide for practical application in direct methanol fuel cells (DMFCs)10.1016/j.ijhydene.2017.09.166 ↗
27. Cross-linked fully aromatic sulfonated polyamide as a highly efficiency polymeric filler in SPEEK membrane for high methanol concentration direct methanol fuel cells10.1007/s10853-017-1945-1 ↗
28. A superhydrophobic bromomethylated poly(phenylene oxide) as a multifunctional polymer filler in SPEEK membrane towards neat methanol operation of direct methanol fuel cells10.1016/j.memsci.2017.09.013 ↗
29. On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells10.1016/S0376-7388(00)00632-3 ↗
30. Polymer electrolyte membranes based on poly(arylene ether)s with penta-sulfonated pendent groups10.1039/C2TA00363E ↗
31. Low water swelling and high proton conducting sulfonated poly(arylene ether) with pendant sulfoalkyl groups for proton exchange membranes10.1002/marc.200700452 ↗
32. Aromatic poly(ether ketone)s with pendant sulfonic acid phenyl groups prepared by a mild sulfonation method for proton exchange membranes10.1021/ma061705+ ↗
33. Proton-conducting aromatic polymers carrying hypersulfonated side chains for fuel cell applications10.1002/adfm.200700107 ↗
34. Influence of the polymer backbone structure on the properties of aromatic ionomers with pendant sulfobenzoyl side chains for use as proton-exchange membranes10.1021/am1008612 ↗
35. Synthesis and properties of polyaryletherketones10.1016/0032-3861(81)90299-8 ↗
36. Cross-linked tri-side chains poly(arylene ether ketone)s containing pendant alkylsulfonic acid groups for proton exchange membranes10.1016/j.jpowsour.2011.11.004 ↗
37. Controlling crystallinity in graft ionomers, and its effect on morphology, water sorption, and proton conductivity of graft ionomer membranes10.1021/cm4005932 ↗
38. Investigations of crystallinity and chain entanglement on sorption and conductivity of proton exchange membranes10.1016/j.memsci.2014.06.041 ↗
39. Poly(ether ether ketone) (PEEK)-based graft-type polymer electrolyte membranes having high crystallinity for high conducting and mechanical properties under various humidified conditions10.1039/C5TA05567A ↗
40. Ionomers for proton exchange membrane fuel cells with sulfonic acid groups on the end groups: novel linear aromatic poly(sulflde-ketone)s10.1021/ma071423p ↗
41. High-performance semicrystalline poly(ether ketone)-based proton exchange membrane10.1021/acsami.7b03720 ↗
42. High dimensional stability and alcohol resistance aromatic poly(aryl ether ketone) polyelectrolyte membrane synthesis and characterization10.1021/acsaem.8b01557 ↗
43. X-ray data for poly(aryl ether ketones)10.1016/0032-3861(80)90228-1 ↗
44. Hydrocarbon-Based polymer electrolyte membranes: importance of morphology on ion transport and membrane stability10.1021/acs.chemrev.6b00586 ↗
45. Highly proton conducting proton-exchange membranes based on fluorinated poly(arylene ether ketone)s with octasulfonated segments10.1002/pola.28857 ↗