Enhanced lithiation dynamics in nanostructured Nb18W16O93 anodes
Source abstract
Abstract
Lithium ion batteries are essential for energy storage in many applications, such as portable electronic devices and electric vehicles. However, charge-discharge rates and cycle life of the current batteries are insufficient to fulfill the targeted requirements of projected future devices, due to the severe limitations of conventional graphite anodes. Niobium tungsten oxides have recently been attracting attention as a new anode material for fast (dis)charging, owing to their stable host structure for lithium intercalation. It was originally believed that nanoscaling and nanostructuring would have a negligible effect on its electrochemical performance. However, the influence of the particle and grain size of niobium tungsten oxide electrodes on its electrochemical behavior is still an open question. This work reports on an investigation of the dependence of the lithiation process on the grain size of Nb18W16O93 anodes down to 60 nm. The results demonstrate that downscaling below 100 nm significantly enhances the lithiation dynamics of niobium tungsten oxide. Furthermore, it suggests that the grain boundaries of Nb18W16O93 have significant influence to the fast lithiation process. It provides a new perspective on the impact of downscaling grains to improve the electrochemical performance of Nb18W16O93 anodes for realizing fast (dis)charging in future energy storage devices.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Review of energy storage and transportation of energy10.1002/est2.49 ↗
2. Review of electrical energy storage technologies, materials and systems: challenges and prospects for large-scale grid storage10.1039/C8EE01419A ↗
3. 30 Years of lithium‐ion batteries
4. Performance and cost of materials for lithium-based rechargeable automotive batteries
5. Lithium-ion batteries: outlook on present, future, and hybridized technologies10.1039/C8TA10513H ↗
6. Brief history of early lithium-battery development10.3390/ma13081884 ↗
7. Review on challenges and recent advances in the electrochemical performance of high capacity Li‐ and Mn‐rich cathode materials for Li‐ion batteries10.1002/aenm.201702397 ↗
8. Fundamental understanding and practical challenges of anionic redox activity in Li-ion batteries10.1038/s41560-018-0097-0 ↗
9. Promises, challenges, and recent progress of inorganic solid‐state electrolytes for all‐solid‐state lithium batteries
10. Challenges and opportunities towards fast-charging battery materials10.1038/s41560-019-0405-3 ↗
11. Safety issues in lithium ion batteries: materials and cell design10.3389/fenrg.2019.00065 ↗
12. A review of lithium ion battery failure mechanisms and fire prevention strategies10.1016/j.pecs.2019.03.002 ↗
13. High-performance anode materials for rechargeable lithium-ion batteries10.1007/s41918-018-0001-4 ↗
14. Effect of diffusion on lithium intercalation in titanium dioxide10.1103/PhysRevLett.86.1275 ↗
15. Preparation of a nanocrystalline titanium dioxide negative electrode for the rechargeable lithium ion battery10.1016/S0013-4686(97)10140-2 ↗
16. Nanostructures and lithium electrochemical reactivity of lithium titanites and titanium oxides: a review10.1016/j.jpowsour.2009.02.038 ↗
17. Titanium‐based anode materials for safe lithium‐ion batteries10.1002/adfm.201200698 ↗
18. Evaluation of undoped and M-doped TiO2, where M = Sn, Fe, Ni/Nb, Zr, V, and Mn, for lithium-ion battery applications prepared by the molten-salt method10.1039/C5RA00206K ↗
19. Long term cycling studies of electrospun TiO2 nanostructures and their composites with MWCNTs for rechargeable Li-ion batteries10.1039/C1RA00514F ↗
20. Preparation of particulate Li4Ti5O12 having excellent characteristics as an electrode active material for power storage cells10.1016/S0378-7753(03)00169-1 ↗
21. Surface-amorphized TiO2 nanoparticles anchored on graphene as anode materials for lithium-ion batteries10.1016/j.jpowsour.2018.07.019 ↗
22. Low temperature molten salt synthesis of anatase TiO2 and its electrochemical properties10.1016/j.ssi.2013.11.030 ↗
23. A robust strategy for crafting monodisperse Li4Ti5O12 nanospheres as superior rate anode for lithium ion batteries10.1016/j.nanoen.2016.01.005 ↗
24. Nanostructured Nb2O5 polymorphs by electrospinning for rechargeable lithium batteries10.1021/jp9088589 ↗
25. Energy storage studies of bare and doped vanadium pentoxide, (V1.95M0.05)O5, M = Nb, Ta, for lithium ion batteries10.1039/c0ee00513d ↗
26. Metal oxides and oxysalts as anode materials for Li ion batteries10.1021/cr3001884 ↗
27. Li4Ti5O12 nanosheets embedded in three-dimensional amorphous carbon for superior-rate battery applications10.1016/j.jallcom.2018.08.001 ↗
28. Doubling reversible capacities in epitaxial Li4Ti5O12 thin film anodes for microbatteries10.1021/acsaem.9b00217 ↗
29. High reversible pseudocapacity in mesoporous yolk–shell anatase TiO2/TiO2(B) microspheres used as anodes for Li‐ion batteries10.1002/adfm.201703270 ↗
30. Hollow multishelled heterostructured anatase/TiO2(B) with superior rate capability and cycling performance10.1002/adma.201805754 ↗
31. Reducing carbon in LiFePO4/C composite electrodes to maximize specific energy, volumetric energy, and tap density10.1149/1.1498255 ↗
32. A structural investigation of some stable phases in the region Nb2O5.WO3-WO310.1107/S0567740868002979 ↗
33. Highly efficient lithium container based on non-Wadsley-Roth structure Nb18W16O93 nanowires for electrochemical energy storage10.1016/j.electacta.2018.09.169 ↗
34. Niobium tungsten oxides for high-rate lithium-ion energy storage10.1038/s41586-018-0347-0 ↗
35. W3Nb14O44 nanowires: ultrastable lithium storage anode materials for advanced rechargeable batteries10.1016/j.ensm.2018.09.008 ↗
36. Ultrathin W9Nb8O47 nanofibers modified with thermal NH3 for superior electrochemical energy storage10.1016/j.ensm.2018.03.005 ↗
37. Effect of 0.5 M NaNO3: 0.5 M KNO3 and 0.88 M LiNO3:0.12 M LiCl molten salts, and heat treatment on electrochemical properties of TiO210.1149/2.077206jes ↗
38. Phase equilibria as related to crystal structure in the system niobium pentoxide-tungsten trioxide10.6028/jres.070A.025 ↗
39. The diffraction of X-rays by small crystalline particles10.1103/PhysRev.56.972 ↗
40. Nanoscale mapping of ion diffusion in a lithium-ion battery cathode10.1038/nnano.2010.174 ↗
41. A C-coated and Sb-doped SnO2 nanocompsite with high surface area and low charge transfer resistance as ultrahigh capacity lithium ion battery anode10.1016/j.mtener.2019.05.006 ↗
42. SnO2 quantum Dots@Graphene oxide as a high‐rate and long‐life anode material for lithium‐ion batteries10.1002/smll.201502183 ↗
43. In situ synthesis of CuCo2S4@N/S-doped graphene composites with pseudocapacitive properties for high-performance lithium-ion batteries10.1021/acsami.8b00632 ↗
44. Preparation and electrochemical studies of electrospun TiO2 nanofibers and molten salt method nanoparticles10.1016/j.electacta.2009.12.095 ↗
45. Electrochemical properties of bare and Ta-substituted Nb2O5 nanostructures10.1016/j.electacta.2010.10.047 ↗
46. Cyclic voltammetry and galvanostatic cycling characteristics of LiNiVO4 thin films during lithium insertion and re/de-insertion10.1016/j.elecom.2006.10.011 ↗
47. Glass‐ceramic‐like vanadate cathodes for high‐rate lithium‐ion batteries10.1002/aenm.201903411 ↗
48. Pseudocapacitive contributions to electrochemical energy storage in TiO2 (anatase) nanoparticles10.1021/jp074464w ↗
49. High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance10.1038/nmat3601 ↗
50. Short-circuit diffusion in ceramics10.1023/A:1021539124206 ↗