journal article·2020-02

Local measurement of current collector potential in a polymer electrolyte membrane water electrolyser

Hans Becker, Luis Castanheira, Gareth Hinds

Publisher page

Abstract

Reduction in the cost of polymer electrolyte membrane water electrolyser (PEMWE) technology is urgently required for the realisation of commercially viable green hydrogen production. However, at present up to half of the manufacturing cost of a PEMWE stack is associated with the current collector components, with platinum-coated titanium a common material of choice. Here we report in situ measurements of local corrosion potential at PEMWE current collectors during cell operation, using a hydrogen reference electrode connected to the cell via a Nafion salt bridge. We demonstrate for the first time that significant polarisation of the anode current collector occurs only at the local interface with the anode electrode; away from this region the corrosion potential of the anode current collector is completely decoupled from the potential of the anode electrode due to the low ionic conductivity of the deionised water phase. Use of a thin porous titanium spacer layer at this interface would open up the possibility of using cheaper materials such as carbon and stainless steel for anode current collector components, which could lead to a step change in the cost of the technology.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hybrid Renewable Energy Systems · Advanced Battery Technologies Research · Fuel Cells and Related Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Space-time variability of climate variables and intermittent renewable electricity production – a review10.1016/j.rser.2017.05.046 ↗
2. Review of electrical energy storage technologies, materials and systems: challenges and prospects for large-scale grid storage10.1039/C8EE01419A ↗
3. A comprehensive review on PEM water electrolysis10.1016/j.ijhydene.2013.01.151 ↗
4. The investment costs of electrolysis – a comparison of cost studies from the past 30 years10.1016/j.ijhydene.2017.11.115 ↗
5. Addendum to the Multi - Annual Work Plan 2014 - 2020
6. Research advances towards low cost, high efficiency PEM electrolysis10.1149/1.3484496 ↗
7. Bertuccioli · 2014
8. Perspectives on low-temperature electrolysis and potential for renewable hydrogen at scale10.1146/annurev-chembioeng-060718-030241 ↗
9. A review of proton exchange membrane water electrolysis on degradation mechanisms and mitigation strategies10.1016/j.jpowsour.2017.09.006 ↗
10. Protective coatings on stainless steel bipolar plates for proton exchange membrane (PEM) electrolysers10.1016/j.jpowsour.2015.12.071 ↗
11. Materials for Proton Exchange Membrane water electrolyzer bipolar plates10.1016/j.ijhydene.2016.11.106 ↗
12. Coated stainless steel bipolar plates for proton exchange membrane electrolyzers10.1149/2.0141611jes ↗
13. Protective coatings on stainless steel bipolar plates for proton exchange membrane (PEM) electrolysers10.1016/j.jpowsour.2015.12.071 ↗
14. Low-cost and durable bipolar plates for proton exchange membrane electrolyzers10.1038/srep44035 ↗
15. Influence of microporous layer on corrosion of metallic bipolar plates in fuel cells10.1016/j.jpowsour.2019.02.005 ↗
16. Towards more representative test methods for corrosion resistance of PEMFC metallic bipolar plates10.1016/j.ijhydene.2014.12.085 ↗
17. In situ characterisation of PEM water electrolysers using a novel reference electrode10.1016/j.elecom.2015.01.005 ↗
18. Validation and characterization of suitable materials for bipolar plates in PEM water electrolysis10.1016/j.ijhydene.2015.04.155 ↗
19. Time dependence of the open circuit potential of platinum disk electrodes in half cell experiments10.1149/2.0121907jes ↗
20. Current density effect on hydrogen permeation in PEM water electrolyzers10.1016/j.ijhydene.2017.03.231 ↗
21. Experimental evidence of increasing oxygen crossover with increasing current density during PEM water electrolysis10.1016/j.elecom.2017.07.018 ↗
22. Comprehensive investigation of novel pore-graded gas diffusion layers for high-performance and cost-effective proton exchange membrane electrolyzers10.1039/C7EE01240C ↗
23. Developing titanium micro/nano porous layers on planar thin/tunable LGDLs for high-efficiency hydrogen production10.1016/j.ijhydene.2018.05.139 ↗
24. Activity and durability of iridium nanoparticles in the oxygen evolution reaction10.1149/2.0151611jes ↗
25. Membrane degradation in PEM water electrolyzer: numerical modeling and experimental evidence of the influence of temperature and current density10.1016/j.ijhydene.2014.11.111 ↗
26. Investigation on the degradation of MEAs for PEM water electrolysers part I: effects of testing conditions on MEA performances and membrane properties10.1016/j.ijhydene.2016.07.125 ↗