Microscopic phase-segregated quaternary ammonia polysulfone membrane for vanadium redox flow batteries
Source abstract
Abstract
Abstract Anion-exchange membranes have been investigated for vanadium redox flow batteries. However, their commercial application is plagued by the low transportation efficiency of anions in the membranes. Inspired by a strategy for constructing an ionic highway in alkaline anion-exchange membranes to accelerate the migration of anions. Thus, a well-segregated phase morphology is achieved to construct three-dimensional anion channels via architectural design of amphiphilic quaternary ammonium polysulfone with hydrophobic hexane side chains. This unique morphology gives the membrane enhanced conductivity with less water uptake, and this thereby enables the vanadium redox flow battery that is fabricated with the microscopic phase-segregated membrane to have better voltage and energy efficiency under current densities in the range of 60–150 mA cm−2. Furthermore, the vanadium redox flow battery using the microscopic phase-segregated membrane has excellent cycling stability. These investigations provide a universal strategy for developing of anion-exchange membranes that have high-conductivity and are stable for use in vanadium redox flow batteries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced battery technologies research · Fuel Cells and Related Materials · Membrane-based Ion Separation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Anion-exchange membranes in electrochemical energy systems10.1039/C4EE01303D ↗
2. Polysulfone-based anion exchange membranes demonstrate excellent chemical stability and performance for the all-vanadium redox flow battery10.1039/c3ta11459g ↗
3. Modification of anion-exchange membranes for vanadium redox flow battery applications10.1016/S0378-7753(96)02463-9 ↗
4. Characteristics of the all-vanadium redox flow battery using anion exchange membrane10.1016/j.jtice.2014.08.032 ↗
5. Mechanism of polysulfone-based anion exchange membranes degradation in vanadium flow battery10.1021/acsami.5b05840 ↗
6. Highly stable anion exchange membranes with internal cross-linking networks10.1002/adfm.201500284 ↗
7. High performance membranes based on new 2-adamantane containing poly(aryl ether ketone) for vanadium redox flow battery applications10.1016/j.jpowsour.2018.07.050 ↗
8. The next generation vanadium flow batteries with high power density – a perspective10.1039/C7CP07456E ↗
9. Ion conducting membranes for aqueous flow battery systems10.1039/C8CC03058H ↗
10. A bunch-like tertiary amine grafted polysulfone membrane for vrfbs with simultaneously high proton conductivity and low vanadium ion permeability10.1002/marc.201600710 ↗
11. Highly stable pyridinium-functionalized cross-linked anion exchange membranes for all vanadium redox flow batteries10.1016/j.jpowsour.2016.09.065 ↗
12. Quaternized adamantane-containing poly(aryl ether ketone) anion exchange membranes for vanadium redox flow battery applications10.1016/j.jpowsour.2016.06.101 ↗
13. Poly(phenyl sulfone) anion exchange membranes with pyridinium groups for vanadium redox flow battery applications10.1016/j.jpowsour.2015.02.070 ↗
14. Optimized anion exchange membranes for vanadium redox flow batteries10.1021/am401858r ↗
15. Preparation and properties of polybenzimidazole/quaternized poly(1-vinylimidazole) cross-linked blend membranes for vanadium redox flow battery applications10.1177/0954008317711235 ↗
16. A novel chloromethylated/quaternized poly(sulfone)/poly(vinylidene fluoride) anion exchange membrane with ultra-low vanadium permeability for all vanadium redox flow battery10.1016/j.memsci.2017.09.015 ↗
17. Crosslinked anion exchange membranes with primary diamine-based crosslinkers for vanadium redox flow battery application10.1016/j.jpowsour.2017.07.068 ↗
18. Random quaternary ammonium diels-alder poly(phenylene) copolymers for improved vanadium redox flow batteries10.1016/j.jpowsour.2017.03.130 ↗
19. Preparation and characterization of crosslinked anion exchange membrane (aem) materials with poly(phenylene ether)-based short hydrophilic block for use in electrochemical applications10.1016/j.memsci.2017.02.015 ↗
20. Composite anion exchange membranes based on quaternized cardo-poly(etherketone) and quaternized inorganic fillers for vanadium redox flow battery applications10.1016/j.ijhydene.2016.04.060 ↗
21. Synthesis and investigation of imidazolium functionalized poly(arylene ether sulfone)s as anion exchange membranes for all-vanadium redox flow batteries10.1039/C5RA25372A ↗
22. Quaternized membranes bearing zwitterionic groups for vanadium redox flow battery through a green route10.1016/j.memsci.2015.02.014 ↗
23. Model of a vanadium redox flow battery with an anion exchange membrane and a larminie-correction10.1016/j.jpowsour.2014.08.082 ↗
24. Synthesis and characterization of vinylimidazole-co-trifluoroethylmethacrylate-co-divinylbenzene anion-exchange membrane for all-vanadium redox flow battery10.1016/j.memsci.2014.05.050 ↗
25. Anion exchange membranes from brominated poly(aryl ether ketone) containing 3,5-dimethyl phthalazinone moieties for vanadium redox flow batteries10.1039/c3ta14503d ↗
26. Shen · 2006 · vol. 1
27. Effect of sulfuric and triflic acids on the hydration of vanadium cations: an ab initio study10.1021/acs.jpca.5b01794 ↗
28. The transfer behavior of different ions across anion and cation exchange membranes under vanadium flow battery medium10.1016/j.jpowsour.2014.07.111 ↗
29. Critical transport issues for improving the performance of aqueous redox flow batteries10.1016/j.jpowsour.2016.11.040 ↗
30. State of understanding of nafion10.1021/cr0207123 ↗
31. Layer-by-layer self-assembly of nafion–[cs–pwa] composite membranes with suppressed vanadium ion crossover for vanadium redox flow battery applications10.1039/C4RA01775G ↗
32. In situ construction of interconnected ion transfer channels in anion-exchange membranes for fuel cell application10.1039/C6TA09277B ↗
33. Constructing ionic highway in alkaline polymer electrolytes10.1039/C3EE43275K ↗
34. Designing advanced alkaline polymer electrolytes for fuel cell applications10.1021/ar200201x ↗
35. Polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene triblock copolymer separators for a vanadium-cerium redox flow battery10.1149/2.1301704jes ↗
36. A gemini quaternary ammonium poly (ether ether ketone) anion-exchange membrane for alkaline fuel cell: design, synthesis, and properties10.1002/cssc.201402664 ↗
37. Thermodynamics of crew-cut micelle formation of polystyrene-b-poly(acrylic acid) diblock copolymers in dmf/h2o mixtures10.1021/jp970105x ↗
38. Doping structure and degradation mechanism of polypyrrole–nafion® composite membrane for vanadium redox flow batteries10.1039/C6RA23630H ↗
39. Inducing microstructural changes in nafion by incorporating graphitic carbon nitride to enhance the vanadium-blocking effect10.1039/C7CP07744K ↗
40. Theoretical investigation into suitable pore sizes of membranes for vanadium redox flow batteries10.1002/celc.201700244 ↗
41. Application of the commercial ion exchange membranes in the all-vanadium redox flow battery10.1016/j.jiec.2017.11.023 ↗
42. Pore-filled anion-exchange membranes for electrochemical energy conversion applications10.1016/j.electacta.2016.10.041 ↗
43. Examination of amine-functionalised anion-exchange membranes for possible use in the all-vanadium redox flow battery10.1016/j.electacta.2014.06.058 ↗
44. Selectivity of ion exchange membranes: a review10.1016/j.memsci.2018.03.051 ↗
45. Enhanced membrane ion selectivity by incorporating graphene oxide nanosheet for vanadium redox flow battery application10.1016/j.electacta.2017.07.122 ↗
46. Evaluation of diels–alder poly(phenylene) anion exchange membranes in all-vanadium redox flow batteries10.1016/j.elecom.2014.03.010 ↗
47. Derivatized cardo-polyetherketone anion exchange membranes for all-vanadium redox flow batteries10.1039/C4TA00166D ↗