journal article·2019-07

Charge-discharge performances of Sn powder as a high capacity anode for all-solid-state lithium batteries

Reona Miyazaki, Takehiko Hihara

Publisher page

Abstract

Abstract This paper reports the anode properties of Sn powder in all-solid-state lithium batteries. Although poor cycling performance is a critical problem for high capacity anodes in the conventional lithium ion batteries with liquid electrolytes, stable charge-discharge cycles have been revealed in all-solid-state lithium batteries; capacity of 600 mAh g−1 is maintained for over 100 cycles. Furthermore, the composite of Sn and solid electrolyte is spontaneously densified after charge-discharge cycling. Consequently, the intimate contact between Sn and solid electrolyte is maintained for the measurement, which contribute to the stable cycle performance of Sn anode in an all-solid-state cell. These results demonstrate that the use of Sn anode is more likely for the all-solid-state batteries rather than the conventional lithium ion batteries using liquid electrolytes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Lithium alloy negative electrodes10.1016/S0378-7753(99)00124-X ↗
2. Silicon-Based anodes for lithium-ion Batteries : from fundamentals to practical applications10.1002/smll.201702737 ↗
3. Electrochemical lithiation of tin and tin-based intermetallics and composites10.1016/S0013-4686(99)00191-7 ↗
4. Irreversible capacity of electrodeposited Sn thin film anode10.1016/j.jpowsour.2005.03.052 ↗
5. Tin-Based materials as advanced anode materials for lithium ion Batteries : a review
6. The dimensionality of Sn anodes in Li-ion batteries10.1016/S1369-7021(13)70012-9 ↗
7. Interconnected silicon hollow nanospheres for lithium-ion battery anodes with long cycle life10.1021/nl201470j ↗
8. Bowl-like SnO 2 @ carbon hollow particles as an advanced anode material for lithium-ion batteries10.1002/anie.201407917 ↗
9. Yolk−Shell Sn@C eggette-like nanostructure: application in lithium- ion and sodium-ion batteries10.1021/acsami.6b04736 ↗
10. Three-dimensional porous core-shell Sn @ carbon composite anodes for high-performance lithium-ion battery applications10.1002/aenm.201100380 ↗
11. Characterization of Li2S – P2S5 glass-ceramics as a solid electrolyte for lithium secondary batteries10.1016/j.ssi.2004.08.036 ↗
12. An amorphous Si film anode for all-solid-state lithium batteries10.1016/j.jpowsour.2014.08.109 ↗
13. Porous amorphous silicon film anodes for high-capacity and stable all-solid-state lithium batteries10.1038/s42004-018-0026-y ↗
14. Ab initio calculation of the lithium-tin voltage profile10.1103/PhysRevB.58.15583 ↗
15. Lithium storage in carbon-coated SnO2 by conversion reaction10.1016/j.jpowsour.2012.10.068 ↗
16. Anode properties of silicon-rich amorphous silicon suboxide films in all-solid-state lithium batteries10.1016/j.jpowsour.2016.08.070 ↗
17. A self-assembled breathing interface for all-solid-state ceramic lithium batteries10.1149/1.1809553 ↗
18. Formation of superionic crystals from mechanically milled Li2S – P2S5 glasses10.1016/S1388-2481(02)00555-6 ↗
19. Behavior of some binary lithium alloys as negative electrodes in organic solvent-based electrolytes10.1149/1.2108601 ↗
20. Self-limiting lithiation in silicon10.1021/nn305282d ↗
21. Ultrafine Sn and SnSb 0 . 14 powders for lithium storage matrices in lithium-ion batteries10.1149/1.1392584 ↗
22. High reversibility of “soft” electrode materials in all-solid-state batteries10.3389/fenrg.2016.00019 ↗
23. Rock-salt-type litium meta sulphides as novel positive-electrode materials10.1038/srep04883 ↗