journal article·2019-02

Cr2N coated martensitic stainless steels by pack cementation process as materials for bipolar plates of proton exchange membrane fuel cells

Y.Q. Hu, F. Chen, Z.D. Xiang

Publisher page

Abstract

Abstract Bipolar plates in proton exchange membrane fuel cells must have corrosion resistance in an acidic environment and also high electrical conductivity. For steels to be used as bipolar plate materials, surface treatment process suitable for volume production must be developed so that both of these two key property requirements can be met within cost limit. Cr2N is both corrosion resistant in acidic environment and electrically conductive, but it is technically challenging to produce Cr2N-coated steels by thermochemical process such as gas-nitriding, which is suitable for volume production purpose. Here, it is shown that the pack cementation process, which is another form of thermochemical process, can be applied to form a pinhole free Cr2N surface layer on martensitic stainless steels, providing a novel method for producing Cr2N-coated steels for use as bipolar plate materials for proton exchange membrane fuel cells. The corrosion resistance and the pinhole free feature of such Cr2N-coated steel are both confirmed by immersion test in H2SO4 solutions at 60 °C in which the Cr2N-coated steel shows no mass change whereas the uncoated steel exhibits rapid mass loss.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Metal and Thin Film Mechanics · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Effect of alloying elements on the contact resistance and the passivation behavior of stainless steel10.1016/S0010-938X(01)00107-X ↗
2. Bipolar plates for PEM fuel cells10.1016/S0378-7753(03)00070-3 ↗
3. Coating of stainless steel and titanium bipolar plates for anticorrosion in PEMFC: a review10.1016/j.ijhydene.2016.06.241 ↗
4. Stainless steels in bipolar plates-Surface resistive properties of corrosion resistant steel grades during current loads10.1016/j.corsci.2005.05.012 ↗
5. A review of composite and metallic bipolar plates in proton exchange membrane fuel cell: materials, fabrication, and material selection10.1016/j.jpowsour.2014.04.081 ↗
6. Metal bipolar plates for PEM fuel cell − A review10.1016/j.jpowsour.2006.09.088 ↗
7. A review of metallic bipolar plates for proton exchange membrane fuel cells: materials and fabrication methods
8. Active screen plasma nitriding of 316 stainless steel for the application of bipolar plates in proton exchange membrane fuel cells10.1016/j.ijhydene.2014.04.102 ↗
9. Active screen plasma surface coalloying treatments of 316 stainless steel with nitrogen and silver for fuel cell bipolar plates10.1016/j.surfcoat.2015.10.038 ↗
10. Surface composition effect of nitriding Ni-free stainless steel as bipolar plate of polymer electrolyte fuel cell10.1016/j.apsusc.2016.01.174 ↗
11. Corrosion behavior of pre-oxidized and thermally nitrided stainless steel for polymer electrolyte membrane fuel cell bipolar plates10.1016/j.corsci.2012.01.014 ↗
12. Thermally nitrided stainless steels for polymer electrolyte membrane fuel cell bipolar plates Part 1: model Ni–50Cr and austenitic 349TM alloys10.1016/j.jpowsour.2004.06.067 ↗
13. Thermally nitrided stainless steels for polymer electrolyte membrane fuel cell bipolar plates Part 2: beneficial modification of passive layer on AISI44610.1016/j.jpowsour.2004.06.064 ↗
14. Pre-oxidized and nitrided stainless steel alloy foil for proton exchange membrane fuel cell bipolar plates: Part 1. Corrosion, interfacial contact resistance, and surface structure10.1016/j.jpowsour.2010.03.055 ↗
15. Pre-oxidized and nitrided stainless steel alloy foil for proton exchange membrane fuel cell bipolar plates. Part 2: single-cell fuel cell evaluation of stamped plates10.1016/j.jpowsour.2010.03.056 ↗
16. Protective nitride formation on stainless steel alloys for proton exchange membrane fuel cell bipolar plates10.1016/j.jpowsour.2007.08.106 ↗
17. Study of electrical, mechanical, and tribological properties of CrNx thin films as a function of sputtering conditions10.1007/s11665-014-1148-8 ↗
18. Corrosion and mechanical studies of chromium nitride films prepared by ion-beam-assisted deposition10.1016/S0257-8972(98)80004-2 ↗
19. Corrosion behavior of CrN, Cr2N and π phase surfaces on nitrided Ni–50Cr for proton exchange membrane fuel cell bipolar plates10.1016/j.corsci.2005.10.019 ↗
20. Improved hot corrosion resistance of Y–Ce–Co-modified aluminide coating on nickel base superalloys by pack cementation process10.1016/j.corsci.2014.11.043 ↗
21. Pack cementation process for the formation of refractory metal modified aluminide coatings on nickel-base superalloys10.1023/A:1025915812928 ↗
22. On the selection of halide activators for the formation of hybrid Ni-aluminide/Ni coatings on creep resistant ferritic steels by low temperature pack cementation process10.1016/j.matchemphys.2015.05.066 ↗
23. Formation of chromium nitride coatings on carbon steels by pack cementation process10.1016/j.surfcoat.2016.10.047 ↗
24. A novel single step surface treatment process for forming Cr-nitride coatings on steels10.1007/s11661-016-3873-0 ↗
25. Formation of hard surface layer on austenitic stainless steels via simultaneous chromising and nitriding by pack cementation process10.1016/j.apsusc.2012.01.167 ↗
26. Conditions for Co-deposition of Al and Cr on nickel-base superalloys by pack cementation process10.1179/026708401101517890 ↗
27. Thermodynamics and kinetics of pack aluminide coating formation on IN-10010.1149/1.2401976 ↗
28. Corrosion properties and contact resistance of TiN, TiAlN and CrN coatings in simulated proton exchange membrane fuel cell environments10.1016/j.jpowsour.2009.12.127 ↗
29. Corrosion and electrical properties of CrN- and TiN-coated 316L stainless steel used as bipolar plates for polymer electrolyte membrane fuel cells10.1016/j.tsf.2012.09.027 ↗
30. Corrosion resistance of CrN and CrCN/CrN coatings deposited using cathodic arc evaporation in Ringer's and Hank's solutions10.1016/j.surfcoat.2016.04.069 ↗
31. Chromium nitride films on stainless steel as bipolar plate for proton exchange membrane fuel cell10.1016/j.jpowsour.2009.06.029 ↗
32. Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution10.1016/j.corsci.2018.02.031 ↗
33. Thermal nitridation of chromium electroplated AISI316L stainless steel for polymer electrolyte membrane fuel cell bipolar plate10.1016/j.jpowsour.2007.04.054 ↗
34. Chromium nitride/Cr coated 316L stainless steel as bipolar plate for proton exchange membrane fuel cell10.1016/j.jpowsour.2010.08.028 ↗
35. Mario Maza, Influence of CrN-coating thickness on the corrosion resistance behaviour of aluminium-based bipolar plates10.1016/j.jpowsour.2010.11.069 ↗
36. Corrosion properties and contact resistance of TiN, TiAlN and CrN coatings in simulated proton exchange membrane fuel cell environments10.1016/j.jpowsour.2009.12.127 ↗
37. Thin chromium nitride PVD coatings on stainless steel for conductive component as bipolar plates of PEM fuel cells: ex-situ and in-situ performances evaluation10.1016/j.ijhydene.2012.04.035 ↗
38. Fabrication and corrosion resistance of a graphene-tin oxide composite film on aluminium alloy 606110.1016/j.corsci.2017.10.031 ↗
39. Corrosion protection of 304 stainless steel bipolar plates of PEMFC by coating SnO2 Film10.20964/2017.11.67 ↗
40. A novel combination approach for the preparation of superhydrophobic surface on copper and the consequent corrosion resistance10.1016/j.corsci.2016.04.015 ↗
41. Etching and heating treatment combined approach for superhydrophobic surface on brass substrates and the consequent corrosion resistance10.1016/j.corsci.2015.10.013 ↗