journal article·2018-10

Nanoflake δ-MnO2 deposited on carbon nanotubes-graphene-Ni foam scaffolds as self-standing three-dimensional porous anodes for high-rate-performance lithium-ion batteries

Xue Zhai, Zhu Mao, Guangyu Zhao, David Rooney, Naiqing Zhang, Kening Sun

Publisher page

Abstract

Abstract The electrification of transportation necessitates the growth of high-power-density lithium ion batteries. However, traditional graphite anodes in lithium ion batteries perform poorly especially when charged or discharged under high current density. In this work, we deposit nanoflake δ-MnO2 on the carbon nanotubes-Graphene-Nickel foam compound matrix and apply it as a self-standing anode without binder or conductive agent. This composite buffers volume change, enables more electrochemical active sites, boosts the conductivity of electrode materials and facilitates lithium-ion diffusion. The resulting lithium ion batteries with the composite anodes show improved cycle life and enhanced rate performance, yielding a high specific capacity of 1250 mAh g−1 for 350 cycles at 0.4 A g−1 and 490 mAh g−1 over 700 cycles at 4.0 A g−1.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries10.1039/c0ee00699h ↗
2. The Li-ion rechargeable Battery : a perspective10.1021/ja3091438 ↗
3. Battery materials for ultrafast charging and discharging10.1038/nature07853 ↗
4. Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries10.1038/35035045 ↗
5. Nanostructured reduced graphene oxide/Fe2O3 composite as a high-performance anode material for lithium ion batteries10.1021/nn200493r ↗
6. Nanoparticulate TiO2 (B): an anode for lithium-ion batteries10.1002/anie.201108300 ↗
7. TiO2 nanodisks designed for Li-ion batteries: a novel strategy for obtaining an ultrathin and high surface area anode material at the ice interface10.1039/c3ee41880d ↗
8. Accurate control of multishelled Co3O4 hollow microspheres as high-performance anode materials in lithium-ion batteries10.1002/anie.201301622 ↗
9. Carbon coated Fe3O4 nanospindles as a superior anode material for lithium-ion batteries10.1002/adfm.200801386 ↗
10. A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes10.1038/nnano.2014.6 ↗
11. Silicon-based nanomaterials for lithium-ion batteries10.1002/aenm.201300882 ↗
12. Silicon-based materials as high capacity anodes for next generation lithium ion batteries10.1016/j.jpowsour.2014.05.096 ↗
13. Multilayered Si nanoparticle/reduced graphene oxide hybrid as a high-performance lithium-ion battery anode10.1002/adma.201302757 ↗
14. Twisted aligned carbon nanotube/silicon composite fiber anode for flexible wire-shaped lithium-ion battery10.1002/adma.201304319 ↗
15. Dendrite-free lithium deposition induced by uniformly distributed lithium ions for efficient lithium metal batteries10.1002/adma.201506124 ↗
16. Prestoring lithium into stable 3D nickel foam host as dendrite-free lithium metal anode
17. Li-storage via heterogeneous reaction in selected binary metal fluorides and oxides10.1149/1.1801451 ↗
18. Interdispersed amorphous MnOx-carbon nanocomposites with superior electrochemical performance as lithium-storage material10.1002/adfm.201102137 ↗
19. A hierarchically nanostructured composite of MnO2/conjugated polymer/graphene for high-performance lithium ion batteries10.1002/aenm.201100223 ↗
20. Nanostructured Mn-based oxides for electrochemical energy storage and conversion10.1039/C4CS00218K ↗
21. Electrochemical properties of MnO2 nanorods as anode materials for lithium ion batteries10.1016/j.electacta.2014.07.089 ↗
22. Graphene-wrapped MnO2-graphene nanoribbons as anode materials for high-performance lithium ion batteries10.1002/adma.201302915 ↗
23. Freestanding manganese dioxide nanosheet network grown on nickel/polyvinylidene fluoride coaxial fiber membrane as anode materials for high performance lithium ion batteries10.1016/j.jpowsour.2015.08.012 ↗
24. Free-standing layer-by-layer hybrid thin film of graphene-MnO2 nanotube as anode for lithium ion batteries10.1021/jz200836h ↗
25. Preparation of β-MnO2 nanocrystal/acetylene black composites for lithium batteries10.1039/B306780G ↗
26. Electrode reactions of manganese oxides for secondary lithium batteries10.1016/j.elecom.2010.08.023 ↗
27. In-situ synthesis of MnO2@CNT microsphere composites with enhanced electrochemical performances for lithium-ion batteries10.1016/j.jpowsour.2016.02.002 ↗
28. Facile synthesis of nickel-foam-based nano-architectural composites as binder-free anodes for high capacity Li-ion batteries10.1016/j.jpowsour.2015.11.053 ↗
29. Preparation of MnO2 and MnO2/carbon nanotubes nanocomposites with improved electrochemical performance for lithium ion batteries10.1007/s10008-016-3208-5 ↗
30. An extremely stable MnO2 anode incorporated with 3D porous graphene-like networks for lithium-ion batteries10.1039/c3ta14372d ↗
31. Interconnected MnO2 nanoflakes assembled on graphene foam as a binder-free and long-cycle life lithium battery anode10.1016/j.carbon.2015.04.021 ↗
32. Manganese dioxide/carbon nanotubes composite with optimized microstructure via room temperature solution approach for high performance lithium-ion battery anodes10.1016/j.electacta.2015.11.084 ↗
33. Interconnected MnO2 nanoflakes supported by 3D nanostructured stainless steel plates for lithium ion battery anodes10.1016/j.electacta.2013.12.064 ↗
34. Coaxial manganese dioxide@N-doped carbon nanotubes as superior anodes for lithium ion batteries10.1016/j.electacta.2015.09.150 ↗
35. Highly conductive three-dimensional MnO2-carbon nanotube-graphene-Ni hybrid foam as a binder-free supercapacitor electrode10.1039/C3NR04495E ↗
36. Three-dimensional flexible and conductive interconnected graphene networks grown by chemical vapour deposition10.1038/nmat3001 ↗
37. Synthesis and characterization of phosphorus-nitrogen doped multiwalled carbon nanotubes10.1016/j.carbon.2011.07.018 ↗
38. Synthesis of graphene-carbon nanotube hybrid foam and its use as a novel three-dimensional electrode for electrochemical sensing10.1039/c2jm33286h ↗
39. Raman spectrum of graphene and graphene layers10.1103/PhysRevLett.97.187401 ↗
40. Higher valency ion substitution into the manganese oxide framework10.1021/ja048985y ↗
41. Direct growth of flower-like δ-MnO2 on three-dimensional graphene for high-performance rechargeable Li-O2 batteries10.1002/aenm.201301960 ↗
42. Fabrication in-depth characterization and formation mechanism of crystalline porous birnessite MnO2 film with amorphous bottom layers by hydrothermal method10.1021/cg800312u ↗
43. Nickel foam supported mesoporous MnO2 nanosheet arrays with superior lithium storage performance10.1039/c3cc44079f ↗
44. On the origin of the extra electrochemical capacity displayed by MO/Li cells at low potential10.1149/1.1467947 ↗
45. Nanocrystallinity effects in lithium battery materials: aspects of nano-ionics. Part IV10.1039/b309130a ↗
46. Porous nitrogen doped carbon sphere as high performance anode of sodium-ion battery10.1016/j.carbon.2015.07.067 ↗
47. Doping effects of zinc on LiFePO4 cathode material for lithium ion batteries10.1016/j.elecom.2006.07.014 ↗