journal article·2017-09

Enhancement of thermal transport in Gel Polymer Electrolytes with embedded BN/Al2O3 nano- and micro-particles

Vivek Vishwakarma, Ankur Jain

Publisher page

Abstract

Abstract While Gel Polymer Electrolytes (GPEs) have been widely investigated for use in next-generation Li-ion cells due to the potential for improved thermal safety, thermal transport within a GPE is still poorly understood. Among all materials in a Li-ion cell, the GPE has the lowest thermal conductivity, and hence determines the overall rate of heat flow in a Li-ion cell. This makes it critical to measure and understand thermal transport in a GPE and investigate trade-offs between thermal and ionic transport. This paper presents measurements of thermal and ionic conductivities in a PVdF-based GPE. The effect of incorporating BN/Al 2 O 3 ceramic nano/microparticles in the GPE on thermal and ionic transport is characterized. Measurements indicate up to 2.5X improvement in thermal conductivity of activated GPE membranes, with relatively minor effect on electrochemical performance of GPE-based single-layer cells. The measured enhancement in thermal conductivity is in very good agreement with theoretical calculations based on the effective medium theory that accounts for thermal transport in a dispersed, two-phase medium such as a GPE. The fundamental insights gained in this work on thermal transport in a GPE and the role of nano/microparticle inclusions may facilitate thermal-electrochemical optimization and design of GPEs for safe, high-performance Li-ion cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Thermal management of lithium-ion batteries for electric vehicles10.1002/er.1956 ↗
2. Enabling technologies for disappearing electronics in smart textiles10.1109/ISSCC.2003.1234347 ↗
3. All-organic active matrix flexible display10.1063/1.2178213 ↗
4. Thermal runaway caused fire and explosion of lithium ion battery10.1016/j.jpowsour.2012.02.038 ↗
5. Thermal stability studies of Li-Ion cells and components10.1149/1.1392458 ↗
6. Polymer electrolytes for lithium-ion batteries10.1002/(SICI)1521-4095(199804)10:6<439::AID-ADMA439>3.0.CO;2-I ↗
7. Review on gel polymer electrolytes for lithium batteries10.1016/j.eurpolymj.2005.09.017 ↗
8. Review of gel-type polymer electrolytes for lithium-ion batteries10.1016/S0378-7753(98)00193-1 ↗
9. Battery separators10.1021/cr020738u ↗
10. Printable ion-gel gate dielectrics for low-voltage polymer thin-film transistors on plastic10.1038/nmat2291 ↗
11. Highly flexible and all-solid-state paperlike polymer supercapacitors10.1021/nl1019672 ↗
12. Building better batteries10.1038/451652a ↗
13. Cycling characteristics of lithium powder polymer batteries assembled with composite gel polymer electrolytes and lithium powder anode10.1002/adfm.201200692 ↗
14. Imprintable, bendable, and shape-conformable polymer electrolytes for versatile-shaped lithium-ion batteries10.1002/adma.201204182 ↗
15. Novel types of lithium-ion polymer electrolyte batteries10.1016/S0167-2738(01)00835-9 ↗
16. New, ionic liquid-based membranes for lithium battery application10.1016/j.jpowsour.2008.10.036 ↗
17. Ionic liquids to the rescue? Overcoming the ionic conductivity limitations of polymer electrolytes10.1016/j.elecom.2003.09.017 ↗
18. Li-ion transport, structural and thermal studies on lithium triflate and barium titanate incorporated poly(vinylidene fluoride-co-hexafluoropropene) based polymer electrolyte10.1016/j.ssi.2016.03.008 ↗
19. Gel-type polymer electrolytes with different types of ceramic fillers and lithium salts for lithium-ion polymer batteries10.1016/j.jpowsour.2005.06.018 ↗
20. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
21. Facile and reliable in Situ Polymerization of Poly(Ethyl Cyanoacrylate)-based polymer electrolytes toward flexible lithium batteries10.1021/acsami.6b16218 ↗
22. Solid-state Li/LiFePO4 polymer electrolyte batteries incorporating an ionic liquid cycled at 40 °C10.1016/j.jpowsour.2005.06.026 ↗
23. Ionic conductivity of PVdF-based polymer gel electrolytes10.1016/S0167-2738(02)00296-5 ↗
24. Nonaqueous liquid electrolytes for lithium-based rechargeable batteries10.1021/cr030203g ↗
25. Potentialities of ionic liquids as new electrolyte media in advanced electrochemical devices10.1007/s11581-006-0023-5 ↗
26. Lithium ion conduction in ionic liquid-based gel polymer electrolyte10.1016/j.jpowsour.2007.10.063 ↗
27. Ionic-liquid materials for the electrochemical challenges of the future10.1038/nmat2448 ↗
28. Heat transfer enhancement in a lithium-ion cell through improved material-level thermal transport10.1016/j.jpowsour.2015.09.028 ↗
29. Polymer gel electrolytes for application in aluminum deposition and rechargeable aluminum ion batteries
30. Measurement of in-plane thermal conductivity and heat capacity of separator in Li-ion cells using a transient DC heating method10.1016/j.jpowsour.2014.08.066 ↗
31. Measurement of multiscale thermal transport phenomena in li-ion cells: a review
32. Thermally conductive separator with hierarchical nano/microstructures for improving thermal management of batteries10.1016/j.nanoen.2016.01.026 ↗
33. Nanomaterials for rechargeable lithium batteries10.1002/anie.200702505 ↗
34. Big returns from small fibers: a review of polymer/carbon nanotube composites10.1002/pc.20058 ↗
35. Recent advances in polymer protected gold nanoparticles: synthesis, properties and applications10.1039/b707740h ↗
36. Micro-porous P(VDF-HFP)-based polymer electrolyte filled with Al2O3 nanoparticles10.1016/j.ssi.2005.05.006 ↗
37. Effect of nano-sized Al2O3-particle addition on PVDF ultrafiltration membrane performance10.1016/j.memsci.2005.09.044 ↗
38. Effect of Al2O3 Nanofiller on ion conductivity, transmittance, and glass transition temperature of PEI: LiTFSI: PC:EC polymer electrolytes
39. Composite gel polymer electrolyte with ceramic particles for LiNi 1/3 Mn 1/3 Co 1/3 O 2 -Li 4 Ti 5 O 12 lithium ion batteries10.1016/j.electacta.2017.03.176 ↗
40. Very high thermal conductivity obtained by boron nitride-filled polybenzoxazine10.1016/S0040-6031(98)00463-8 ↗
41. Thermal conductivity of boron nitride reinforced polyethylene composites10.1016/j.materresbull.2006.11.047 ↗
42. Enhanced thermal conductivity of polymer composites filled with hybrid filler10.1016/j.compositesa.2005.07.006 ↗
43. Zhang · 2013
44. Composite gel-type polymer electrolytes for advanced, rechargeable lithium batteries10.1016/j.jpowsour.2007.04.008 ↗
45. Electrospun PVdF-based fibrous polymer electrolytes for lithium ion polymer batteries10.1016/j.electacta.2004.07.014 ↗
46. A review on electrolyte additives for lithium-ion batteries10.1016/j.jpowsour.2006.07.074 ↗
47. Experimental investigations of an ionic-liquid-based, magnesium ion conducting, polymer gel electrolyte10.1016/j.jpowsour.2008.10.112 ↗
48. Incropera · 2006
49. Transient plane source techniques for thermal conductivity and thermal diffusivity measurements of solid materials10.1063/1.1142087 ↗
50. Transient hot-strip method for simultaneously measuring thermal conductivity and thermal diffusivity of solids and fluids10.1088/0022-3727/12/9/003 ↗
51. Methods for predicting the thermal conductivity of composite systems: a review10.1002/pen.760160905 ↗
52. Ingham · 1998
53. The electrical resistance of binary metallic mixtures10.1063/1.1702301 ↗
54. Percolation and conduction10.1103/RevModPhys.45.574 ↗
55. A variational approach to the theory of the effective magnetic permeability of multiphase materials10.1063/1.1728579 ↗
56. One-pot hydrothermal synthesis of FeMoO4Nanocubes as an anode material for lithium-ion batteries with excellent electrochemical performance10.1002/smll.201501294 ↗
57. Using graphene nanosheets as a conductive additive to enhance the rate performance of spinel LiMn2O4 cathode material10.1039/c3cp44516j ↗