Numerical and experimental study of the effects of the electrical resistance and diffusivity under clamping pressure on the performance of a metallic gas-diffusion layer in polymer electrolyte fuel cells
Source abstract
Abstract
Abstract The performance of a perforated metal-sheet gas-diffusion layer incorporated with a microporous layer in a fuel cell is evaluated with fine-pitch channel/land designs for the gas flow field on a bipolar plate. The combination of metal-sheet gas-diffusion layer and microporous layer exhibits significant performance without a large flooding effect. When comparing the performance with wider and narrower land cases, the land width affects the performance. To investigate the roles of the microporous layer, land width, etc. in the fuel cell with the metal-sheet gas-diffusion layer, a single-phase, isothermal, and multi-physics simulation is developed and coupled with electrical, mechanical, electrochemical and fluid dynamics factors. The simulated current–voltage performance is then compared to the experimentally measure performance. These are shown to be in good agreement apart for very high current-density cases i.e. greater than 1.5 A cm−2. This is due the flooding effect predominantly appearing. It is further demonstrated that the microporous layer serves as the key component in facilitating gas diffusion and for preventing flooding. Furthermore, the pressure is found to have a strong impact on the performance, affecting the gas diffusion and electric resistance around the microporous layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. New materials for polymer electrolyte membrane fuel cell current collectors10.1016/S0378-7753(98)00264-X ↗
2. Innovative gas diffusion layers and their water removal characteristics in PEM fuel cell cathode10.1016/j.jpowsour.2007.03.042 ↗
3. Modeling and control of air stream and hydrogen flow with recirculation in a PEM fuel cell system—I. Control-oriented modeling10.1016/j.ijhydene.2006.02.031 ↗
4. Water management by material design and engineering for PEM fuel cells10.1149/1.2356236 ↗
5. Committee on Assessment of Resource Needs for Fuel Cell and Hydrogen Technologies, National Research Council · 2008
6. The state of the art of electric and hybrid vehicles10.1109/5.989873 ↗
7. Fuel cell electric vehicles and hydrogen infrastructure: status 201210.1039/c2ee22596d ↗
8. Electrocatalyst approaches and challenges for automotive fuel cells10.1038/nature11115 ↗
9. Papageorgopoulos · 2013
10. A review on PEM voltage degradation associated with water management: impacts, influent factors and characterization10.1016/j.jpowsour.2008.04.037 ↗
11. A review on water balance in the membrane electrode assembly of proton exchange membrane fuel cells10.1016/j.ijhydene.2009.09.017 ↗
12. A review of water flooding issues in the proton exchange membrane fuel cell10.1016/j.jpowsour.2007.12.068 ↗
13. Passive control of liquid water storage and distribution in a PEFC through flow-field design10.1016/j.jpowsour.2008.02.028 ↗
14. Direct measurement of current density under the land and channel in a PEM fuel cell with serpentine flow fields10.1016/j.jpowsour.2009.03.059 ↗
15. Modeling the Influence of GDL and flow-field plate parameters on the reaction distribution in the PEMFC cathode catalyst layer10.1016/j.jpowsour.2004.11.035 ↗
16. Steady state and dynamic performance of proton exchange membrane fuel cells (PEMFCs) under various operating conditions and load changes10.1016/j.jpowsour.2006.03.077 ↗
17. Water uptake by and transport through Nafion® 117 membranes10.1149/1.2056194 ↗
18. Significant performance improvement in terms of reduced cathode flooding in polymer electrolyte fuel cell using a stainless-steel microcoil gas flow field10.1016/j.jpowsour.2013.09.119 ↗
19. Corrugated mesh flow channel and novel microporous layers for reducing flooding and resistance in gas diffusion layer-less polymer electrolyte fuel cells10.1016/j.jpowsour.2014.04.159 ↗
20. Investigation of a copper etching technique to fabricate metallic gas diffusion media10.1088/0960-1317/16/11/N02 ↗
21. Performance of a metallic gas diffusion layer for PEM fuel cells10.1016/j.jpowsour.2007.10.055 ↗
22. Perforated metal sheets as gas diffusion layers for proton exchange membrane fuel cells10.1149/2.017203esl ↗
23. Electrical contact resistance in thin (≤0.5 μm) gold plated contacts: effect of gold plating thickness10.1109/TCAPT.2010.2060340 ↗
24. Experimental and numerical modeling study of the electrical resistance of gas diffusion layer-less polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2014.12.077 ↗
25. Diffusion media materials and characterization
26. ASTM Standard D695, 2010 · 2003
27. Thermal conductivity, electrical resistivity, and thermoelectric power of graphite10.1103/PhysRev.89.870 ↗
28. Numerical study of assembly pressure effect on the performance of proton exchange membrane fuel cell10.1016/j.energy.2010.01.032 ↗
29. Catalyst layer cracks by buckling deformation of membrane electrode assemblies under humidity cycles and mitigation methods10.1016/j.jpowsour.2013.04.026 ↗
30. 1995
31. Mechanical response of fuel cell membranes subjected to a hygro-thermal cycle10.1016/j.jpowsour.2006.05.020 ↗
32. Nonlinear orthotropic model of the inhomogeneous assembly compression of PEM fuel cell gas diffusion layers10.1016/j.ijhydene.2011.05.152 ↗
33. Uneven gas diffusion layer intrusion in gas channel arrays of proton exchange membrane fuel cell and its effects on flow distribution10.1016/j.jpowsour.2009.05.019 ↗
34. Development and application of a generalised steady-state electrochemical model for a PEM fuel cell10.1016/S0378-7753(99)00484-X ↗
35. Application of Butler–Volmer equations in the modelling of activation polarization for PEM fuel cells10.1016/j.jpowsour.2006.05.026 ↗
36. A computational model for assessing impact of interfacial morphology on polymer electrolyte fuel cell performance10.1016/j.jpowsour.2009.12.121 ↗
37. Parthasarathy · J. Electrochem. Soc. · 1992 · 139 · 253010.1149/1.2221258 ↗
38. Two-phase transport in polymer electrolyte fuel cells with bilayer cathode gas diffusion media10.1149/1.1938067 ↗
39. Understanding the gas diffusion layer in proton exchange membrane fuel cells. I. How its structural characteristics affect diffusion and performance10.1016/j.jpowsour.2013.09.090 ↗
40. Proton conductivity of Nafion 117 as measured by a four-electrode AC impedance method10.1149/1.1836625 ↗
41. Ergun · Chem. Eng. Prog. · 1952 · 48 · 89
42. Berechnung verschiedener physikalischer Konstanten von heterogenen Substanzen. I. Dielektrizitätskonstanten und Leitfähigkeiten der Mischkörper aus isotropen Substanzen10.1002/andp.19354160705 ↗
43. Polymer electrolyte fuel cell model10.1149/1.2085971 ↗
44. Impact of compression on effective thermal conductivity and diffusion coefficient of woven gas diffusion layers in polymer electrolyte fuel cells10.1002/fuce.201200233 ↗
45. 3-D microstructure analysis of fuel cell materials: spatial distributions of tortuosity, void size and diffusivity10.1149/2.068203jes ↗
46. Selection of representative volume elements for pore-scale analysis of transport in fuel cell materials10.1016/j.jpowsour.2011.09.035 ↗
47. Microstructural analysis of mass transport phenomena in gas diffusion media for high current density operation in PEM fuel cells10.1016/j.jpowsour.2015.01.111 ↗
48. Measurements of pore size distribution, porosity, effective oxygen diffusivity, and tortuosity of PEM fuel cell electrodes10.1002/fuce.201200017 ↗
49. Contact resistance and contact resistivity10.1149/1.2404240 ↗
50. Electron transport in PEFCs10.1149/1.1641036 ↗
51. Effects of the electrical resistances of the GDL in a PEM fuel cell10.1016/j.jpowsour.2006.04.106 ↗
52. Two-phase transport and the role of micro-porous layer in polymer electrolyte fuel cells10.1016/j.electacta.2004.04.027 ↗
53. Investigation on the effect of microstructure of proton exchange membrane fuel cell porous layers on liquid water behavior by soft X-ray radiography10.1016/j.jpowsour.2011.05.045 ↗
54. Effect of polytetrafluoroethylene (PTFE) and micro porous layer (MPL) on thermal conductivity of fuel cell gas diffusion layers: modeling and experiments10.1016/j.jpowsour.2013.09.136 ↗
55. Impact of channel wall hydrophobicity on through-plane water distribution and flooding behavior in a polymer electrolyte fuel cell10.1016/j.electacta.2009.11.095 ↗
56. Visualization of water buildup in the cathode of a transparent PEM fuel cell10.1016/S0378-7753(03)00797-3 ↗
57. Relationship between pressure drop and cell resistance as a diagnostic tool for PEM fuel cells10.1016/j.jpowsour.2004.08.055 ↗
58. Visualization and quantification of cathode channel flooding in PEM fuel cells10.1016/j.jpowsour.2008.11.030 ↗