journal article·2016-02

Cross-linked poly (vinyl alcohol)/sulfosuccinic acid polymer as an electrolyte/electrode material for H2–O2 proton exchange membrane fuel cells

D. Ebenezer, Abhijit P. Deshpande, Prathap Haridoss

Publisher page

Abstract

Abstract Proton exchange membrane fuel cell (PEMFC) performance with a cross-linked poly (vinyl alcohol)/sulfosuccinic acid (PVA/SSA) polymer is compared with Nafion ® N-115 polymer. In this study, PVA/SSA (≈5 wt. % SSA) polymer membranes are synthesized by a solution casting technique. These cross-linked PVA/SSA polymers and Nafion are used as electrolytes and ionomers in catalyst layers, to fabricate different membrane electrode assemblies (MEAs) for PEMFCs. Properties of each MEA are evaluated using scanning electron microscopy, contact angle measurements, impedance spectroscopy and hydrogen pumping technique. I–V characteristics of each cell are evaluated in a H 2 –O 2 fuel cell testing fixture under different operating conditions. PVA/SSA ionomer causes only an additional ≈4% loss in the anode performance compared to Nafion ionomer. The maximum power density obtained from PVA/SSA based cells range from 99 to 117.4 mW cm −2 with current density range of 247 to 293.4 mA cm −2 . Ionic conductivity of PVA/SSA based cells is more sensitive to state of hydration of MEA, while maximum power density obtained is less sensitive to state of hydration of MEA. Maximum power density of cross-linked PVA/SSA membrane based cell is about 35% that of Nafion ® N-115 based cell. From these results, cross-linked PVA/SSA polymer is identified as potential candidate for PEMFCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Conducting polymers and applications · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Properties of selected sulfonated polymers as proton-conducting electrolytes for polymer electrolyte fuel cells10.1016/S0167-2738(02)00011-5 ↗
2. Performance comparison of long and short-side chain perfluorosulfonic membranes for high temperature polymer electrolyte membrane fuel cell operation10.1016/j.jpowsour.2010.12.084 ↗
3. A review of polymer–nanocomposite electrolyte membranes for fuel cell application10.1016/j.jiec.2014.04.030 ↗
4. Cross-linked poly (vinyl alcohol) membranes10.1016/j.progpolymsci.2009.05.003 ↗
5. Thermal and structural studies of poly (vinyl alcohol) and hydroxypropyl cellulose blends
6. Manufacturing process assumptions used in fuel cell system cost analyses10.1016/j.jpowsour.2011.02.035 ↗
7. Using crosslinked polyvinyl alcohol polymer membrane as a separator in the microbial fuel cell10.1007/s11783-013-0534-z ↗
8. Cross-linked poly (vinyl alcohol) membranes containing sulfonic acid group: proton and methanol transport through membranes10.1016/j.memsci.2004.03.030 ↗
9. Proton exchange membranes for fuel cells operated at medium temperatures: materials and experimental techniques10.1016/j.pmatsci.2010.11.001 ↗
10. Proton-conducting membranes with high selectivity from cross-linked poly(vinyl alcohol) and poly(vinyl pyrrolidone) for direct methanol fuel cell applications10.1016/j.jpowsour.2008.09.072 ↗
11. Crosslinked poly(vinyl alcohol)/sulfonated poly(ether ether ketone) blend membranes for fuel cell applications surface energy characteristics and proton conductivity10.1016/j.jpowsour.2010.08.094 ↗
12. Development of alkaline direct methanol fuel cells based on crosslinked PVA polymer membranes10.1016/j.jpowsour.2006.06.065 ↗
13. Dependence of optimum Nafion content in catalyst layer on platinum loading10.1016/j.jpowsour.2003.12.060 ↗
14. Fuel cell catalyst layers: a polymer science perspective10.1021/cm401445h ↗
15. High-performance self-humidifying membrane electrode assembly prepared by simultaneously adding inorganic and organic hygroscopic materials to the anode catalyst layer10.1016/j.jpowsour.2013.04.050 ↗
16. Diffusion and interfacial transport of water in Nafion10.1021/jp1112125 ↗
17. Optimum nafion content in PEM fuel cell electrodes10.1016/j.electacta.2004.01.126 ↗
18. Fabrication of catalyst-coated membrane by modified decal transfer technique10.1016/j.elecom.2010.01.006 ↗
19. New preparation method for polymer electrolyte fuel cells10.1149/1.2044068 ↗
20. Identification of the key variables in membrane electrode preparation for PEM fuel cells by a factorial design10.1016/j.renene.2009.10.013 ↗
21. Fabrication of a thin catalyst layer using organic solvents10.1016/j.jpowsour.2003.09.018 ↗
22. The synthesis and characterization of anhydrous proton conducting membranes based on sulfonated poly (vinyl alcohol) and imidazole10.1016/j.memsci.2011.03.041 ↗
23. The effect of drop size on contact angle10.1016/0021-9797(79)90239-X ↗
24. Hydrophilicity and hydrophobicity study of catalyst layers in proton exchange membrane fuel cells10.1016/j.electacta.2005.06.036 ↗
25. The influence of anode gas diffusion layer on the performance of low- temperature DMFC10.1016/j.jpowsour.2007.03.027 ↗
26. Stack design
27. Effects of operating conditions on the performances of individual cell and stack of PEM fuel cell10.1016/j.jpowsour.2008.02.001 ↗
28. Characterization of polymer electrolyte fuel cells using AC impedance spectroscopy10.1149/1.1836485 ↗
29. Methods to study the ionic conductivity of polymeric electrolytes using a.c. impedance spectroscopy10.1007/s100080000190 ↗
30. Separation and compression characteristics of hydrogen by use of proton exchange membrane10.1016/j.jpowsour.2006.10.018 ↗
31. Electrochemical hydrogen pumping using a high temperature polybenzimidazole (PBI) membrane10.1016/j.jpowsour.2007.11.059 ↗
32. Experimental determination of electro-osmotic drag coefficient in nafion membrane for fuel cells10.1149/1.2203934 ↗
33. Ionomer content in the catalyst layer of polymer electrolyte membrane fuel cell (PEMFC): effects on diffusion and performance10.1016/j.ijhydene.2010.11.076 ↗
34. Characterization of polymer electrolytes for fuel cell applications10.1016/0167-2738(93)90295-E ↗
35. On porous electrodes in electrolyte solutions – IV10.1016/0013-4686(64)85015-5 ↗
36. Diffusion of water in Nafion 115 membranes10.1149/1.1393879 ↗
37. The compression of hydrogen in an electrochemical cell based on a PE fuel cell design10.1016/S0378-7753(01)00941-7 ↗
38. Oxygen permeation studies on alternative proton exchange membranes designed for elevated temperature operation10.1016/S0013-4686(03)00257-3 ↗
39. Organic-inorganic hybrid membrane: thermally stable cation-exchange membrane prepared by the sol-gel method10.1021/ma048404p ↗