journal article·2015-08Open access

Study of acetylene poisoning of Pt cathode on proton exchange membrane fuel cell spatial performance using a segmented cell system

Tatyana V. Reshetenko, Jean St-Pierre

Abstract

Abstract Acetylene is a welding fuel and precursor for organic synthesis, which requires considering it to be a possible air pollutant. In this work, the spatial performance of a proton exchange membrane fuel cell exposed to 300 ppm C 2 H 2 and different operating currents was studied with a segmented cell system. The injection of C 2 H 2 resulted in a cell performance decrease and redistribution of segments' currents depending on the operating conditions. Performance loss was 20–50 mV at 0.1–0.2 A cm −2 and was accompanied by a rapid redistribution of localized currents. Acetylene exposure at 0.4–1.0 A cm −2 led to a sharp voltage decrease to 0.07–0.13 V and significant changes in current distribution during a transition period, when the cell reached a voltage of 0.55–0.6 V. A recovery of the cell voltage was observed after stopping the C 2 H 2 injection. Spatial electrochemical impedance spectroscopy (EIS) data showed different segments' behavior at low and high currents. It was assumed that acetylene oxidation occurs at high cell voltage, while it reduces at low cell potential. A detailed analysis of the current density distribution, its correlation with EIS data and possible C 2 H 2 oxidation/reduction mechanisms are presented and discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. The effects of battlefield contaminants on PEMFC performance10.1016/S0378-7753(99)00341-9 ↗
2. Mepsted · 2001
3. A review of PEM hydrogen fuel cell contamination: impacts, mechanisms, and mitigation10.1016/j.jpowsour.2006.12.012 ↗
4. Air impurities
5. Effect of contaminants on polymer electrolyte membrane fuel cells10.1016/j.pecs.2010.06.003 ↗
6. The impact of air contaminants on PEMFC performance10.1016/j.jpowsour.2007.12.091 ↗
7. Effects of atmospheric trace species on the oxygen reduction reaction on the production of H2O210.1149/1.2981931 ↗
8. Effect of air contaminants on electrolyte degradation in PEMFC10.1149/1.3210634 ↗
9. The effect of ambient contamination on PEMFC performance10.1016/j.jpowsour.2006.12.103 ↗
10. Assessing durability of cathodes exposed to common air impurities10.1016/j.jpowsour.2004.06.036 ↗
11. Effects of contaminants of catalyst activity
12. The impact of impurities on long term PEMFC performance10.1149/1.3210713 ↗
13. Impact of SO2 on the oxygen reduction reaction at Pt/vulcan carbon electrocatalysts10.1149/1.2736648 ↗
14. Deactivation of Pt/VC PEMFC cathodes by SO2, H2S and COS10.1016/j.jpowsour.2008.11.072 ↗
15. Insights on the SO2 poisoning of Pt3CO/VC and Pt/VC fuel cell catalysts10.1016/j.electacta.2010.06.004 ↗
16. Influence of SO2 concentration and relative humidity on electrode poisoning in PEMFC10.1299/jtst.7.619 ↗
17. Sulphur dioxide poisoning and recovery of Pt nanoparticles: effect of particle size10.1016/S1452-3981(23)16521-7 ↗
18. Study of SO2 crossover in PEMFC10.1016/j.jpowsour.2010.11.103 ↗
19. The multiprocess degradation of PEMFC performance due to SO2 contamination and its recovery10.1149/1.3247546 ↗
20. Analysis of the SO2 contamination effect on the oxygen reduction reaction in PEMFCs by EIS10.1149/2.067205jes ↗
21. PEMFC contamination model: Competitive adsorption demonstrated with NO210.1149/1.2833301 ↗
22. Effect, mechanism and recovery of NOx poisoning on oxygen reduction reaction at Pt/C catalysts10.1016/j.jpowsour.2010.07.091 ↗
23. Oxygen reduction reaction on Pt/carbon fuel cell catalyst in the presence of trace quantities of ammonium ions: an RRDE study10.1016/j.ijhydene.2011.12.040 ↗
24. Ionic transport and water vapor uptake of ammonium exchange perfluorosulfonic acid membranes10.1149/2.040203jes ↗
25. Diagnosis of contamination introduced by ammonia at the cathode in a PEMFC10.1016/j.ijhydene.2012.05.125 ↗
26. The effect of NaCl in the cathode air stream on PEMFC performance10.1002/fuce.200600206 ↗
27. Imamura · 2009
28. Effects of atmospheric aerosol on the performance of environmentally sustainable passive air-breathing PEM fuel cells10.1016/j.ijhydene.2012.08.132 ↗
29. PEMFC contamination: testing and diagnosis of toluene-induced cathode degradation10.1016/j.jpowsour.2008.07.006 ↗
30. PEM fuel cell contamination: effects of operating conditions on toluene-induced cathode degradation10.1149/1.3040212 ↗
31. Poisoning effect of selected hydrocarbon impurities on the catalytic performance of Pt/C catalysts towards the oxygen reduction reaction10.1149/2.126306jes ↗
32. Quantitative ranking criteria for PEMFC contaminants10.1016/j.ijhydene.2012.01.029 ↗
33. The impact of operating conditions on the performance effect of selected airborne PEMFC contaminants10.1149/05002.0635ecst ↗
34. PEMFC cathode contamination with C2H2 – potential dependency10.1149/05801.0507ecst ↗
35. Cell performance in a PEMFC stack during contamination10.1149/05801.0555ecst ↗
36. PEMFC cathode contamination mechanisms for several VOCs – acetonitrile, acetylene, bromomethane, iso-propanol, methyl methacrylate, naphthalene and propene10.1149/05801.0519ecst ↗
37. PEMFC cathode catalyst contamination evaluation with a RRDE –acetylene10.1016/j.electacta.2014.04.005 ↗
38. PEMFC cathode catalyst contamination evaluation with a RRDE – acetonitrile10.1016/j.electacta.2014.04.149 ↗
39. PEMFC cathode catalyst contamination evaluation with a RRDE – propene and naphthalene10.1016/j.electacta.2014.06.147 ↗
40. Lloyd · 2011
41. Electrochemical oxidation of organic compound at metals of the platinum group
42. Oxidation of C2 molecules
43. The mechanism of the electro-oxidation of acetylene on platinum10.1149/1.2426269 ↗
44. Segmented polymer electrolyte membrane fuel cells – a review10.1016/j.rser.2010.08.024 ↗
45. A printed circuit board approach to measuring current distribution in a fuel cell10.1023/A:1003206513954 ↗
46. In-situ methods for the determination of current distributions in PEM fuel cells10.1016/S0013-4686(98)00137-6 ↗
47. Measurement of current distribution in a free-breathing PEMFC10.1016/S0378-7753(01)01063-1 ↗
48. Experimental and numerical studies of local current mapping on a PEM fuel cell10.1016/j.ijhydene.2008.07.035 ↗
49. Current distribution in a single cell of PEMFC10.1016/S0378-7753(03)00093-4 ↗
50. Dependence of current distribution on water management in PEFC of technical size10.1016/j.jpowsour.2004.12.039 ↗
51. The effect of low humidity on the uniformity and stability of segmented PEM fuel cells10.1016/j.jpowsour.2007.12.078 ↗
52. Oscillations in gas channels. Part I. The forgotten player in impedance spectroscopy in PEFCs10.1149/1.2435706 ↗
53. Oscillations in gas channels. Part II. Unraveling the characteristics of the low frequency loop in air-fed PEFC impedance spectra10.1149/1.2742291 ↗
54. PEMFC operation failure under severe dehydration10.1016/j.ijhydene.2011.11.059 ↗
55. Segmented cell as toll for development of fuel cells and error prevention/prediagnostic in fuel cell stack10.1016/j.jpowsour.2007.03.055 ↗
56. Influence of the microporous layer on carbon corrosion in the catalyst layer of a polymer electrolyte membrane fuel cell10.1016/j.jpowsour.2012.04.086 ↗
57. Systematic study of back pressure and anode stoichiometry effects on spatial PEMFC performance distribution10.1016/j.electacta.2011.07.058 ↗
58. Systematic studies of the gas humidification effects on spatial PEMFC performance distributions10.1016/j.electacta.2012.02.111 ↗
59. Investigation of membrane pinhole effects in polymer electrolyte fuel cells by locally resolved current density10.1149/1.3504255 ↗
60. Application of a segmented cell setup to detect pinhole and catalyst loading defects in proton exchange membrane fuel cells10.1016/j.electacta.2012.04.138 ↗
61. Effects of local variations of the gas diffusion layer properties on PEMFC performance using a segmented cell system10.1016/j.electacta.2012.07.031 ↗
62. Effects of local gas diffusion layer gas permeability variations on spatial proton exchange membrane fuel cells performance10.1016/j.jpowsour.2013.04.131 ↗
63. Borup · 2009
64. Use of segmented cell operated in H2 recirculation mode to detect water accumulation in PEMFC10.1002/fuce.201200109 ↗
65. Experimental characterization of internal currents during the start-up of a PEMFC10.1016/j.jpowsour.2011.07.013 ↗
66. Study of the cell reversal process of large area PEMFC under fuel starvation10.1016/j.jpowsour.2009.06.059 ↗
67. Behaviors of PEMFC under oxidant starvation10.1016/j.jpowsour.2010.11.005 ↗
68. Behavior of PEMFC in starvation10.1016/j.jpowsour.2005.08.006 ↗
69. Current distribution of a PEMFC under CO poisoning10.1149/1.3210641 ↗
70. Measurement and modeling of carbon monoxide poisoning distribution within a polymer electrolyte fuel cell10.1016/j.ijhydene.2007.01.019 ↗
71. The influence of CO2, CO and air bleed on the current distribution of a polymer electrolyte fuel cell10.1016/j.ijhydene.2008.02.002 ↗
72. The influence of CO on the current density distribution of high temperature polymer electrolyte membrane fuel cells10.1016/j.electacta.2011.08.039 ↗
73. The electro-oxidation of H2, CO in a model PEN fuel cell: oscillations, chaos, pulses10.1149/2.002306jes ↗
74. Spatial PEMFC performance under CO poisoning at a low concentration using a segmented cell system10.1016/j.jpowsour.2012.07.015 ↗
75. Study of low concentration CO poisoning of Pt anode in a proton exchange membrane fuel cell using spatial electrochemical impedance spectroscopy10.1016/j.jpowsour.2014.06.146 ↗
76. A new technique for two-dimensional current distribution measurements in electrochemical cells10.1023/A:1004047412066 ↗
77. Further refinements in the segmented cell approach o diagnosing performance in polymer electrolyte fuel cells10.1016/S0378-7753(03)00533-0 ↗
78. Characterization of polymer electrolyte fuel cells using AC impedance spectroscopy10.1149/1.1836485 ↗
79. Change of electrochemical impedance spectra with time during CO-poisoning of the Pt anode in a membrane fuel cell
80. Electrochemical impedance study of electrode-membrane assemblies in PEM fuel cells. I. Electro-oxidation of H2 and H2/CO mixtures on Pt-based gas-diffusion electrodes10.1149/1.1392588 ↗
81. Relaxation impedance as a model for the deactivation mechanism of fuel cells due to CO poisoning10.1039/b007674k ↗
82. Change of EIS during CO poisoning of the Pt and PtRu anodes in a membrane fuel cell (PEFC)10.1016/S0013-4686(03)00528-0 ↗
83. Change of electrochemical impedance spectra (EIS) with time during CO-poisoning of Pt-anode in a membrane fuel cell10.1016/j.jpowsour.2003.09.031 ↗
84. Electrochemical impedance study of membrane electrode assemblies in PEM fuel cells. II. Electrooxidation of H2 and H2/CO mixtures on Pt/Ru based gas diffusion electrodes10.1021/jp9918407 ↗
85. Electrochemical impedance study of anode CO-poisoning in PEM fuel cells
86. Model interpretation of electrochemical impedance spectroscopy and polarization behavior of H2/CO mixture oxidation in polymer electrolyte fuel cells10.1016/S0013-4686(01)00682-X ↗
87. Effect of CO gas and anode-metal loading on H2 oxidation in proton exchange membrane fuel cell10.1016/S0378-7753(01)00838-2 ↗
88. Assessment of CO-tolerance for different Pt-alloy anode catalysts in polymer electrolyte fuel cell using ac impedance spectroscopy10.1016/S0022-0728(02)00916-6 ↗
89. CO tolerance of commercial Pt and PtRu gas diffusion electrodes in polymer electrolyte fuel cells10.1002/fuce.200400021 ↗
90. Impedance analysis of working PEMFCs in the presence of carbon monoxide10.1149/1.2189280 ↗
91. Impedance plane display of a reaction with an adsorbed intermediate10.1016/S0022-0728(72)80477-7 ↗
92. AC impedance of faradaic reactions involving electrosorbed intermediates – I. Kinetic theory10.1016/0013-4686(87)80005-1 ↗
93. On the impedance plane displays for irreversible electrode reactions based on the stability conditions of the steady-state. I. One state variable besides electrode potential10.1016/0013-4686(90)90077-D ↗
94. Calculation, simulation and interpretation of electrochemical impedances. Part 3. Conditions for observation of low frequency inductive diagrams for a two-step electron transfer reaction with an adsorbed intermediate species10.1016/0022-0728(92)80500-4 ↗
95. On the intrinsic electrochemical nature of the inductance in EIS. A Monte Carlo simulation of the two-consecutive-step mechanism: the flat surface 2 D case10.1016/j.electacta.2008.07.023 ↗
96. Validation and evaluation of electrochemical impedance spectra of system with states that change with time10.1039/b007678n ↗
97. Localized impedance measurements along single channel of a solid polymer fuel cell10.1149/1.1557034 ↗
98. Reaction mechanisms of O2 reduction/evolution reactions
99. Oxygen reduction reaction on smooth single crystal electrodes
100. Theoretical aspects of photoinitiated chemisorption, dissociation and desorption of O2 on Pt (111)10.1021/la00040a017 ↗