Accelerated degradation for solid oxide electrolysers: Analysis and prediction of performance for varying operating environments
Source abstract
Abstract
Solid oxide electrolysis cells (SOECs) are an efficient technology for the production of green hydrogen, that has great potential to contribute to the energy transition and decarbonization of industry. To date, however, time- and resource-intensive experimental campaigns slow down the development and market penetration of the technology. In order to speed-up the evaluation of SOEC performance and durability, accelerated testing protocols are required. This work provides the results of experimental studies on the performance of a SOEC stack operated under accelerated degradation conditions. In order to initiate and accelerate degradation, experiments were performed with high steam partial pressures at the gas inlet, higher voltages and lower temperatures and high steam conversion rates. Thereby, different types and degrees of impact on performance were observed, which were analyzed in detail and linked to the underlying processes and degradation mechanisms. In this context, significantly higher degradation rates were found compared to operation under moderate operating conditions, with the different operating strategies varying in their degradation acceleration potential. The results also suggest that a few hundred hours of operation may be sufficient to predict long-term performance, with the proposed operating strategies providing a solid basis for accelerated assessment of SOEC performance evolution and lifetime.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Chemical Looping and Thermochemical Processes · Molten salt chemistry and electrochemical processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. 2021
2. The hydrogen solution?10.1038/s41558-020-0891-0 ↗
3. Recent advances in high temperature electrolysis using solid oxide fuel cells: A review10.1016/j.jpowsour.2011.12.019 ↗
4. Recent advances in solid oxide cell technology for electrolysis10.1126/science.aba6118 ↗
5. Production of synthesis gas (h2 and co) by high-temperature co-electrolysis of h2o and co210.1016/j.ijhydene.2015.06.034 ↗
6. Carbon dioxide recycling by high temperature co-electrolysis and hydrocarbon synthesis
7. Anode regeneration following carbon depositions in an industrial-sized anode supported solid oxide fuel cell operating on synthetic diesel reformate10.1016/j.jpowsour.2015.06.133 ↗
8. Holistic approach to design, test, and optimize stand-alone sofc-reformer systems10.3390/pr9020348 ↗
9. Experimental investigation of electrochemical reactions along SOFCs for internal and external reformed methane
10. Singhal · 2003
11. Solid oxide electrolysis cells: Degradation at high current densities10.1149/1.3447752 ↗
12. Performance assessment and evaluation of SOC stacks designed for application in a reversible operated 150 kW rSOC power plant
13. Performance investigation and optimization of a SOEC stack operated under industrially relevant conditions10.1149/10301.0519ecst ↗
14. Review—Materials degradation of solid oxide electrolysis cells10.1149/2.0101611jes ↗
15. Reversible solid-oxide cells for clean and sustainable energy10.1093/ce/zkz023 ↗
16. Solid oxide electrolysis cells: Microstructure and degradation of the Ni/Yttria-Stabilized zirconia electrode10.1149/1.2967331 ↗
17. Ni/ysz electrode degradation studied by impedance spectroscopy - effect of p(h2o)10.1016/j.ssi.2010.01.004 ↗
18. Study on local morphological changes of nickel in solid oxide fuel cell anode using porous Ni pellet electrode10.1016/j.jpowsour.2010.08.047 ↗
19. Phase field simulation of anode microstructure evolution of solid oxide fuel cell through Ni(OH)2 diffusion
20. Microstructure degradation of an anode/electrolyte interface in sofc studied by transmission electron microscopy10.1016/j.ssi.2004.08.018 ↗
21. Silica segregation in the ni/ysz electrode10.1149/1.2733861 ↗
22. Degradation in solid oxide electrolysis cells during long term testing10.1002/fuce.201900081 ↗
23. The effects of operating conditions on the performance of a solid oxide steam electrolyser: A model-based study10.1002/fuce.200900211 ↗
24. Study of solid oxide electrolysis cells operated in potentiostatic mode: Effect of operating temperature on durability10.1016/j.cej.2021.129260 ↗
25. Conditions for stable operation of solid oxide electrolysis cells: Oxygen electrode effects10.1039/C9EE01664C ↗
26. Performance and degradation of solid oxide electrolysis cells in stack10.1149/2.0941508jes ↗
27. Model-assisted identification of solid oxide cell elementary processes by electrochemical impedance spectroscopy measurements10.1016/j.jpowsour.2019.226838 ↗
28. Electronic conduction of yttria-stabilized zirconia electrolyte in solid oxide cells operated in high temperature water electrolysis10.1149/1.3138701 ↗
29. Micro-spectroscopic study of the degradation of scandia and ceria stabilized zirconia electrolytes in solid oxide electrolysis cells10.1016/j.ijhydene.2011.07.082 ↗
30. Nine thousand hours of operation of a solid oxide cell in steam electrolysis mode10.1149/2.076202jes ↗
31. 23,000 H steam electrolysis with an electrolyte supported solid oxide cell10.1016/j.ijhydene.2017.01.072 ↗
32. Optimization of ESC performance for co-electrolysis operation10.1149/07801.3025ecst ↗
33. Long-term tests of a jülich planar short stack with reversible solid oxide cells in both fuel cell and electrolysis modes10.1016/j.ijhydene.2013.01.192 ↗
34. Co-electrolysis with CFY-stacks10.1149/07801.3089ecst ↗
35. Long term behavior of solid oxide electrolyser (soec) stacks10.1149/09101.2713ecst ↗
36. A detailed post mortem analysis of solid oxide electrolyzer cells after long-term stack operation10.1149/2.0961805jes ↗
37. Solid oxide electrolyzer stack with 20,000 h of operation10.1149/07801.2885ecst ↗
38. Post-test characterization of a solid oxide fuel cell stack operated for more than 30,000 hours: The cell10.1016/j.jpowsour.2017.11.025 ↗
39. S. Megel, M. Kusnezoff, W. Beckert, N. Trofimenko, C. Dosch, A. Michaelis, C. Bienert, M. Brandner, S. Skrabs, A. Venskutonis, L. Sigl, Progress in design and Performance of CFY stacks, in: 11th International Conference on Ceramic Materials and Components for Energy and Environmental Applications, Vancouver, Canada, 2015.
40. Development of test protocols for solid oxide electrolysis cells operated under accelerated degradation conditions
41. Toward developing accelerated stress tests for proton exchange membrane electrolyzers10.1016/j.coelec.2020.02.024 ↗
42. On the mobility of carbon-supported platinum nanoparticles towards unveiling cathode degradation in water electrolysis10.1016/j.jpowsour.2017.07.033 ↗
43. Study of operating parameters for accelerated anode degradation in SOFCs10.1002/fuce.201600193 ↗
44. Classical statistical methodology for accelerated testing of solid oxide fuel cells10.1016/j.jpowsour.2018.05.034 ↗
45. Towards understanding of oxygen electrode processes during solid oxide electrolysis operation to improve simultaneous fuel and oxygen generation10.1016/j.jpowsour.2021.229600 ↗
46. Accelerated degradation of yttria stabilized zirconia electrolyte during high-temperature water electrolysis10.1007/s10008-018-04184-3 ↗
47. Z-hit : A simple relation between impedance modulus and phase angle. providing a new way to the validation of electrochemical impedance spectra
48. Application of measurement models to impedance spectroscopy iii. evaluation of consistency with the kramers-kronig relations10.1149/1.2048479 ↗
49. Analysis of electrochemical impedance spectroscopy data using the distribution of relaxation times: A bayesian and hierarchical bayesian approach10.1016/j.electacta.2015.03.123 ↗
50. Characterization and performance study of commercially available solid oxide cell stacks for an autonomous system10.1016/j.enconman.2019.112215 ↗
51. Combined deconvolution and cnls fitting approach applied on the impedance response of technical ni/8ysz cermet electrodes10.1149/1.2908860 ↗
52. Detailed insight into processes of reversible solid oxide cells and stacks using drt analysis10.1016/j.enconman.2020.113509 ↗
53. Evaluation and modeling of the cell resistance in anode-supported solid oxide fuel cells10.1149/1.2801372 ↗
54. Durability of solid oxide electrolysis stack under dynamic load cycling for syngas production
55. Eliminating degradation in solid oxide electrochemical cells by reversible operation10.1038/nmat4165 ↗
56. Effect of scaling-up on the performance and degradation of long-term operated electrolyte supported solid oxide cell, stack and module in electrolysis mode10.1016/j.jpowsour.2021.230346 ↗
57. Degradation evaluation by distribution of relaxation times analysis for microtubular solid oxide fuel cells10.1016/j.electacta.2020.135913 ↗
58. Failure mechanism of (La,Sr)MnO3 oxygen electrodes of solid oxide electrolysis cells10.1016/j.ijhydene.2011.05.103 ↗
59. Performance and electrochemical analysis of solid oxide fuel cells based on LSCF-YSZ nano-electrode10.1111/ijac.12748 ↗
60. Characterization of infiltrated (La0.75Sr0.25) 0.95MnO3 as oxygen electrode for solid oxide electrolysis cells10.1016/j.ijhydene.2010.03.049 ↗
61. Improved durability of SOEC stacks for high temperature electrolysis10.1016/j.ijhydene.2012.09.176 ↗
62. Stack optimization and testing for its integration in a rSOC-based renewable energy storage system
63. Performance assessment of industrial-sized solid oxide cells operated in a reversible mode: Detailed numerical and experimental study10.1016/j.ijhydene.2020.07.165 ↗