journal article·2021-10

Well-dispersed single-crystalline nickel-rich cathode for long-life high-voltage all-solid-state batteries

Wei Jiang, Xinming Fan, Xinxin Zhu, Zhenzhen Wu, Zeheng Li, Renzhi Huang, Shu Zhao, Xiaomin Zeng, Guorong Hu, Bao Zhang, Shanqing Zhang, Lingyun Zhu, Lijing Yan, Min Ling, Liguang Wang, Chengdu Liang

Publisher page

Abstract

Abstract Traditional heterogeneous polycrystalline layered oxides suffer from serious chemo-mechanical degradations, which is extremely true in nickel-rich cathodes under high-voltage operation. Although single-crystalline structure is proved to be able to withstand anisotropic lattice strain and prevent cracks formation, the long cycle stability at high-voltage in all-solid-state batteries (ASSBs) with nickel-rich layered oxides as the cathode are still far from commercial applications. Herein, we synthesize a micro-sized single-crystalline nickel-rich oxides LiNi0.83Co0.11Mn0.06O2 (SC–N83) to eliminate the chemo-mechanical failures. The well-dispersed SC-N83 in the ASSBs delivers an excellent cyclic stability under high-voltage (4.4 V vs Li/Li+) operation, which shows a capacity retention of 85.1% after 500 cycles at 0.5C. Even at high active areal loading of 22.6 cm−2 (corresponding to an initial areal capacity of 4.19 mAh cm−2) and high temperature of 50 °C, the SC-N83 cathodes can still maintain 75.5% discharge capacity after 200 cycles at 0.5C. The high cycling stability is further proved to be attributed to dramatically suppressed mechanical failure caused by the build-up of strain and stress. This proposed strategy with highly dispersed single-crystalline nickel-rich oxides paves the way to develop advanced high-capacity and high-voltage operating ASSBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Agency
2. A solid future for battery development10.1038/nenergy.2016.141 ↗
3. Performance and cost of materials for lithium-based rechargeable automotive batteries10.1038/s41560-018-0107-2 ↗
4. Lithium battery chemistries enabled by solid-state electrolytes10.1038/natrevmats.2016.103 ↗
5. Recent advances in all-solid-state rechargeable lithium batteries10.1016/j.nanoen.2017.01.028 ↗
6. Inorganic solid-state electrolytes for lithium batteries: mechanisms and properties governing ion conduction10.1021/acs.chemrev.5b00563 ↗
7. Fundamentals of inorganic solid-state electrolytes for batteries10.1038/s41563-019-0431-3 ↗
8. High-power all-solid-state batteries using sulfide superionic conductors10.1038/nenergy.2016.30 ↗
9. Sulfide solid electrolytes for lithium battery applications10.1002/aenm.201800933 ↗
10. Sulfide-based solid-state electrolytes: synthesis, stability, and potential for all-solid-state batteries10.1002/adma.201901131 ↗
11. Outstanding electrochemical performances of the all-solid-state lithium battery using Ni-rich layered oxide cathode and sulfide electrolyte10.1016/j.jpowsour.2020.227997 ↗
12. All-solid-state lithium batteries with sulfide electrolytes and oxide cathodes10.1007/s41918-020-00081-4 ↗
13. Lithium/sulfide all-solid-state batteries using sulfide electrolytes10.1002/adma.202000751 ↗
14. From nanoscale interface characterization to sustainable energy storage using all-solid-state batteries10.1038/s41565-020-0657-x ↗
15. Challenges in lithium metal anodes for solid-state batteries10.1021/acsenergylett.9b02668 ↗
16. Progress and prospect on failure mechanisms of solid-state lithium batteries10.1016/j.jpowsour.2018.04.055 ↗
17. On the functionality of coatings for cathode active materials in thiophosphate-based all-solid-state batteries10.1002/aenm.201900626 ↗
18. Interface issues and challenges in all-solid-state batteries: lithium, sodium, and beyond10.1002/adma.202000721 ↗
19. Flexible sulfide electrolyte thin membrane with ultrahigh ionic conductivity for all-solid-state lithium batteries10.1021/acs.nanolett.1c01344 ↗
20. Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries10.1038/s41560-018-0191-3 ↗
21. Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries10.1002/anie.201409262 ↗
22. Prospect and reality of Ni-rich cathode for commercialization10.1002/aenm.201702028 ↗
23. Ni-rich layered cathode materials with electrochemo-mechanically compliant microstructures for all-solid-state Li batteries10.1002/aenm.201903360 ↗
24. Capacity fading of Ni-rich LiNixCoyMn1-x-yO2 (0.6 ≤ x ≤ 0.95) cathodes for high-energy-density lithium-ion batteries: bulk or surface degradation?10.1021/acs.chemmater.7b05269 ↗
25. Fundamental and solutions of microcrack in Ni-rich layered oxide cathode materials of lithium-ion batteries10.1016/j.nanoen.2021.105854 ↗
26. Charge-transfer-induced lattice collapse in Ni-rich NCM cathode materials during delithiation10.1021/acs.jpcc.7b06598 ↗
27. Unravelling the chemistry and microstructure evolution of a cathodic interface in sulfide-based all-solid-state Li-ion batteries10.1021/acsenergylett.9b01676 ↗
28. Single- or poly-crystalline Ni-rich layered cathode, sulfide or halide solid electrolyte: which will be the winners for all-solid-state batteries?10.1002/aenm.202100126 ↗
29. Synthesis of single crystal LiNi0.88Co0.09Al0.03O2 with a two-step lithiation method10.1149/2.0681910jes ↗
30. Microstructural observations of "single crystal" positive electrode materials before and after long term cycling by cross-section scanning electron microscopy
31. Single-crystal nickel-rich layered-oxide battery cathode materials: synthesis, electrochemistry, and intra-granular fracture10.1016/j.ensm.2020.01.027 ↗
32. Electrochemo-mechanical effects on structural integrity of Ni-rich cathodes with different microstructures in all solid-state batteries10.1002/aenm.202003583 ↗
33. Crack-free single-crystalline Ni-rich layered NCM cathode enable superior cycling performance of lithium-ion batteries10.1016/j.nanoen.2020.104450 ↗
34. Improved cycling stability of LiNi0.90Co0.05Mn0.05O2 through microstructure modification by boron doping for Li-ion batteries10.1002/aenm.201801202 ↗
35. Determination of kinetics-parameters of mixded-conducting electrodes and applicatioin to system Li3Sb10.1149/1.2133112 ↗
36. Application of AC techniques to the study of lithium diffusion in tungsten trioxide thin-films10.1149/1.2129668 ↗
37. The detrimental effects of carbon additives in Li10GeP2S12-based solid-state batteries10.1021/acsami.7b11530 ↗
38. Enhancement of the high-rate capability of solid-state lithium batteries by nanoscale interfacial modification10.1002/adma.200502604 ↗
39. Electrochemical kinetics and performance of layered composite cathode material Li[Li0.2Ni0.2Mn0.6]O210.1149/2.090311jes ↗
40. Li4V2Mn(PO4)(4)-stablized Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode materials for lithium ion batteries10.1016/j.nanoen.2019.103889 ↗
41. Facilitating the operation of lithium-ion cells with high-nickel layered oxide cathodes with a small dose of aluminum10.1021/acs.chemmater.8b01077 ↗
42. Understanding the enhanced kinetics of gradient-chemical-doped lithium-rich cathode material10.1021/acsami.7b02944 ↗
43. Designing in-situ-formed interphases enables highly reversible cobalt-free LiNiO2 cathode for Li-ion and Li-metal batteries10.1016/j.joule.2019.08.004 ↗
44. Dynamic evolution of cathode electrolyte interphase (CEI) on high voltage LiCoO2 cathode and its interaction with Li anode10.1016/j.ensm.2018.02.016 ↗