journal article·2021-09

Directional LiFePO4 cathode structure by freeze tape casting to improve lithium ion diffusion kinetics

Yongming Guo, Yilan Jiang, Qing Zhang, Dongyun Wan, Chun Huang

Publisher page

Abstract

Abstract Batteries with fast recharge rates while maintaining sufficient capacity are highly attractive for applications such as electric transportation and electrical storage of renewable sources. Designing an electrode structure that enables facile transport of lithium ions and electrons is an effective way to enhance capacity retention at fast charge and discharge rates. Here, we report a LiFePO4 (LFP) cathode as the model electrode with directional microstructure using an in-house developed freeze tape casting (FTC) technique. The microstructure and electrochemical performance of the electrodes with different freeze velocity and solid content were investigated, and an optimized directional electrode microstructure was obtained. The optimized LFP electrode exhibited competitive discharge capacities of 123.8 and 40.7 mA h g−1 at 0.1 and 15 C respectively, where 15 C represents ~4 min charge or discharge. For comparison, the capacity of conventional LFP cathodes containing typical tortuous porous microstructures often drops to negligible levels at the fast charge and discharge rate of 15 C. A relatively large cathode (~10 cm × 5 cm) containing the directional microstructure was fabricated, demonstrating the scalability of the FTC technique.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. A review on inorganic nanoparticles modified composite membranes for lithium-ion batteries: recent progress and prospects10.3390/membranes9070078 ↗
2. The Li-ion rechargeable battery: a perspective10.1021/ja3091438 ↗
3. Key parameters governing the reversibility of Si/carbon/CMC electrodes for Li-ion batteries†10.1021/cm902688w ↗
4. Co3S4 porous nanosheets embedded in graphene sheets as high-performance anode materials for lithium and sodium storage10.1039/C5TA00621J ↗
5. Lithium batteries: status, prospects and future10.1016/j.jpowsour.2009.11.048 ↗
6. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
7. Air-stable and freestanding lithium alloy/graphene foil as an alternative to lithium metal anodes10.1038/nnano.2017.129 ↗
8. A review of functional binders in lithium-sulfur batteries10.1002/aenm.201802107 ↗
9. Electrochemical impedance spectroscopy characterization of LiFePO 4 cathode material with carboxymethylcellulose and poly-3,4-ethylendioxythiophene/polystyrene sulfonate10.1016/j.electacta.2016.12.157 ↗
10. Effect of particle size and purity on the low temperature electrochemical performance of LiFePO4/C cathode material10.1016/j.jallcom.2016.04.070 ↗
11. Ionic network for aqueous-polymer binders to enhance the electrochemical performance of Li-Ion batteries10.1016/j.electacta.2018.10.100 ↗
12. Monodisperse porous LiFePO4 microspheres for a high power Li-ion battery cathode10.1021/ja1110464 ↗
13. Graphene-modified LiFePO(4) cathode for lithium ion battery beyond theoretical capacity10.1038/ncomms2705 ↗
14. Improvement of the electrochemical performance of carbon-coated LiFePO4modified with reduced graphene oxide10.1039/C2TA00106C ↗
15. Improvement of electrochemical performance for spherical LiFePO4 via hybrid coated with electron conductive carbon and fast Li ion conductive La0.56Li0.33TiO310.1016/j.jpowsour.2013.11.036 ↗
16. Effective enhancement of electrochemical properties for LiFePO4/C cathode materials by Na and Ti co-doping10.1016/j.electacta.2012.11.081 ↗
17. Improved electrochemical performance of lithium iron phosphate in situ coated with hierarchical porous nitrogen-doped graphene-like membrane10.1016/j.jpowsour.2015.11.092 ↗
18. High power Nb-doped LiFePO 4 Li-ion battery cathodes; pilot-scale synthesis and electrochemical properties10.1016/j.jpowsour.2016.06.128 ↗
19. Effect of CeO2-coating on the electrochemical performances of LiFePO4/C cathode material10.1016/j.electacta.2011.03.141 ↗
20. LiFePO4 nanoparticles enveloped in freestanding sandwich-like graphitized carbon sheets as enhanced remarkable lithium-ion battery cathode10.1088/0957-4484/27/15/155401 ↗
21. Well-dispersed LiFePO 4 nanoparticles anchored on a three-dimensional graphene aerogel as high-performance positive electrode materials for lithium-ion batteries10.1016/j.jpowsour.2016.11.049 ↗
22. Synthesis of nano-LiFePO4 particles with excellent electrochemical performance by electrospinning-assisted method10.1007/s10008-012-1790-8 ↗
23. Engineering 3D bicontinuous hierarchically macro-mesoporous LiFePO4/C nanocomposite for lithium storage with high rate capability and long cycle stability10.1038/srep25942 ↗
24. A highly-aligned lamellar structure of ice-templated LiFePO4 cathode for enhanced rate capability10.1016/j.matdes.2017.11.003 ↗
25. Tortuosity anisotropy in lithium‐ion battery electrodes10.1002/aenm.201301278 ↗
26. Towards ultrathick battery electrodes: aligned carbon nanotube-enabled architecture10.1002/adma.201103044 ↗
27. Highly conductive, lightweight, low-tortuosity carbon frameworks as ultrathick 3D current collectors10.1002/aenm.201700595 ↗
28. Thick electrodes for high energy lithium ion batteries10.1149/2.0401507jes ↗
29. Freeze-casting: fabrication of highly porous and hierarchical ceramic supports for energy applications10.1016/j.bsecv.2016.02.002 ↗
30. Macroporous PVDF/TiO 2 membranes with three-dimensionally interconnected pore structures produced by directional melt crystallization10.1016/j.cej.2016.05.003 ↗
31. Sandwich, vertical‐channeled thick electrodes with high rate and cycle performance10.1002/adfm.201809196 ↗
32. Electrochemical characterization of high energy density graphite electrodes made by freeze-casting10.1021/acsaem.8b00962 ↗
33. High-performance 3D directional porous LiFePO4/C materials synthesized by freeze casting10.1016/j.apsusc.2018.05.142 ↗
34. Freeze-casting for the fabrication of solid oxide fuel cells: a review10.1016/j.mtla.2018.07.005 ↗
35. Effect of solid content on pore structure and mechanical properties of porous silicon nitride ceramics produced by freeze casting10.1016/j.msea.2010.10.066 ↗
36. Three-dimensionally aligned sulfur electrodes by directional freeze tape casting10.1021/acs.nanolett.9b01805 ↗
37. Enabling fast charging of lithium-ion batteries through secondary-/dual- pore network: Part I - analytical diffusion model
38. Future generations of cathode materials: an automotive industry perspective10.1039/C5TA00361J ↗
39. Development and challenges of LiFePO4cathode material for lithium-ion batteries10.1039/C0EE00029A ↗
40. Optimization of LiFePO4 nanoparticle suspensions with polyethyleneimine for aqueous processing10.1021/la205157d ↗
41. Enhanced electrochemical properties of LiFePO4 cathode using waterborne lithiated ionomer binder in Li-ion batteries with low amount10.1021/acssuschemeng.8b01532 ↗
42. Highly structured, additive free lithium-ion cathodes by freeze-casting technology
43. Impact of pore tortuosity on electrode kinetics in lithium battery electrodes: study in directionally freeze-cast LiNi0.8Co0.15Al0.05O2(NCA)10.1149/2.1321802jes ↗
44. Unidirectional freezing of ceramic suspensions: in situ X-ray investigation of the effects of additives10.1021/am403793x ↗
45. Bioinspired scaffolds with varying pore architectures and mechanical properties10.1002/adfm.201302958 ↗
46. Strong, tough and stiff bioinspired ceramics from brittle constituents10.1038/nmat3915 ↗
47. Cyanoethylated carboxymethyl chitosan as water soluble binder with enhanced adhesion capability and electrochemical performances for LiFePO4 cathode10.1016/j.electacta.2015.10.006 ↗
48. Optimizing areal capacities through understanding the limitations of lithium-ion electrodes10.1149/2.0321602jes ↗
49. Enhancement of electrochemical performances for LiFePO4/C with 3D-grape-bunch structure and selection of suitable equivalent circuit for fitting EIS results10.1016/j.jpowsour.2015.05.018 ↗
50. Amphiphilic latex as a water-based binder for LiFePO4 cathode10.1016/j.jpowsour.2019.01.054 ↗
51. Effects of surface fluorination on the electrochemical properties and thermal stability of LiFePO4 cathode for lithium-ion batteries10.1016/j.jfluchem.2013.01.038 ↗
52. A new route for synthesizing C/LiFePO4/multi-walled carbon nanotube secondary particles for lithium ion batteries10.1016/j.ssi.2013.11.023 ↗
53. Quantifying tortuosity in porous Li-ion battery materials10.1016/j.jpowsour.2008.12.032 ↗
54. Mesoporous LiFePO4/C nanocomposite cathode materials for high power lithium ion batteries with superior performance10.1002/adma.201002045 ↗
55. Research progress on negative electrodes for practical Li‐ion batteries: beyond carbonaceous anodes10.1002/aenm.201402225 ↗