Three dimensional multi-physics modeling and simulation for assessment of mass transport impact on the performance of a high temperature polymer electrolyte membrane fuel cell
Source abstract
Abstract
Abstract The impact of multi-species transports on the performance of a high temperature polymer electrolyte membrane fuel cell (HTPEMFC) is studied by incorporating multi-physics electro-kinetics in a 3D model at 180 °C. A base-case 3D model simulation was carried-out and the validation results showed a very good agreement with the experimental results. The results showed overall performance improvements in HTPEMFC at various parametric conditions. Higher membrane thickness has reduced the cell performance significantly due to increased membrane resistance to the proton flow whereas higher membrane conductivity produced the largest performance improvements among all operating conditions considered. The results showed that the electrolyte ionic current transport is higher close to the channel and lower in the center regions. The hydrogen concentrations went down significantly at the outlet due to uniform consumption of hydrogen throughout the porous electrode. A non-uniform oxygen concentration pattern was observed within the HTPEMFC due to non-homogeneous transport and consumption of oxygen from inlet to the outlet. The water vapor concentration is higher at the outlet, since more water vapor production through increased electro-chemical reactions, as the reactants transported from inlet to the outlet. The 3D model simulation results will be advantageous for further diagnostic analysis of the HTPEMFC systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Barbir · 2013
2. O'Hayre · 2016 · 77
3. Phosphoric acid fuel cells (PAFCs)
4. Laboratory · 2010
5. High-temperature Polybenzimidazol-Based Membranes
6. Recent developments in proton exchange membranes for fuel cells10.1039/b808149m ↗
7. Blended and cross-linked ionomer membranes for application in membrane fuel cells10.1002/fuce.200400079 ↗
8. Concentration and potential distributions in the active layer of proton exchange membrane fuel cell electrodes10.1023/A:1026582814335 ↗
9. Design and experimental implementation of time delay control for air supply in a polymer electrolyte membrane fuel cell system10.1016/j.ijhydene.2013.06.040 ↗
10. Quick crossover current measurement of a polymer electrolyte fuel cell stack with and without cell voltage terminals10.1016/j.jpowsour.2018.10.063 ↗
11. A review of the development of high temperature proton exchange membrane fuel cells10.1016/S1872-2067(14)60272-2 ↗
12. Introduction
13. High-temperature polymerelectrolyte membrane fuel cells
14. High temperature (HT) polymer electrolyte membrane fuel cells (PEMFC): a review10.1016/j.jpowsour.2012.11.126 ↗
15. A comprehensive review of PBI-based high temperature PEM fuel cells10.1016/j.ijhydene.2016.09.024 ↗
16. High temperature PEM fuel cells10.1016/j.jpowsour.2006.05.034 ↗
17. Electrochemical characterization of a polybenzimidazole-based high temperature proton exchange membrane unit cell10.1016/j.jpowsour.2009.02.025 ↗
18. A review on modelling of hightemperature proton exchange membrane fuel cells (HT-PEMFCs)10.1016/j.ijhydene.2016.10.078 ↗
19. A review of high-temperature proton exchange membranefuel cell (HT-PEMFC) systems10.1016/j.ijhydene.2016.06.211 ↗
20. Long-term cell degradation mechanism in high temperature proton exchange membrane fuel cells10.1016/j.jpowsour.2012.02.098 ↗
21. Mathematical model of a PEMFC using a PBI membrane10.1016/j.enconman.2005.08.002 ↗
22. Three-dimensional modeling of a high temperature polymer electrolyte membrane fuel cell at different operation temperatures10.1016/j.ijhydene.2016.03.049 ↗
23. Stationary HTPEMFC-based systems - combined heat and power generation
24. Durability studies of PBI-based high temperaturePEMFCs10.1002/fuce.200800024 ↗
25. Analysis of the regeneration behavior of high temperature polymer electrolyte membranefuel cells after hydrogen starvation10.1016/j.jpowsour.2019.227562 ↗
26. Correlating electrolyteinventory and lifetime of HT-PEFC by accelerated stress testing10.1149/2.0591512jes ↗
27. Determination of theoptimal operating temperature range for high temperature PEM fuel cell considering its performance, CO tolerance and degradation10.1016/j.enconman.2015.08.011 ↗
28. Performance of high temperature PEM fuel cellmaterials. Part 1: effects of temperature, pressure and anode dilution10.1016/j.ijhydene.2015.12.069 ↗
29. Characterization methodology for anode starvation in HT-PEM fuel cells10.1016/j.ijhydene.2019.05.114 ↗
30. Experimental evaluation of CO poisoning on the performance of a high temperature proton exchange membrane fuel cells10.1016/j.jpowsour.2009.04.021 ↗
31. Experimental characterization of the poisoning effects of methanol-based reformate impurities on a PBI-based high temperature PEM fuel cell10.3390/en5114251 ↗
32. Proton conductivity of phosphoric acid doped polybenzimidazole and its composites with inorganic proton conductors10.1016/j.memsci.2003.09.002 ↗
33. Understanding the role of the anode on the polarization losses in high-temperature polymer electrolyte membrane fuel cells using the distribution of relaxation times analysis10.1016/j.jpowsour.2020.228469 ↗
34. Three-dimensional modeling and experimental study of a high temperature PBI-based PEM fuel cell10.1149/1.3203309 ↗
35. Polymer membranes for high temperature proton exchange membrane fuel cell: recent advances and challenges10.1016/j.progpolymsci.2011.01.003 ↗
36. Dynamic modeling of high temperature PEM fuel cell start-up process10.1016/j.ijhydene.2014.09.095 ↗
37. Modelling of start-up time for high temperature polymer electrolyte fuel cells10.1016/j.energy.2011.08.007 ↗
38. Operation of PEM fuel cells at 120-150oC to improve CO tolerance10.1016/j.jpowsour.2005.11.076 ↗
39. The influence of CO on the current density distribution of high temperature polymer electrolyte membrane fuel cells10.1016/j.electacta.2011.08.039 ↗
40. Temperature dependence of CO poisoning in high-temperature proton exchange membrane fuel cells with phosphoric acid-doped polybenzimidazole membranes10.1016/j.ijhydene.2015.01.107 ↗
41. Integration of high temperature PEM fuel cells with a methanol reformer10.1016/j.jpowsour.2005.02.056 ↗
42. Long term testing in continuous mode of HT-PEMFC based H3PO4/PBI Celtec-P MEAs for m-CHP applications10.1002/fuce.200800134 ↗
43. F. Barreras, A. Lozano, V. Roda, J. Barroso, J. Martın, Optimal design and operational tests of a high-temperature PEM fuel cell for a combined heat and power unit, Int. J. Hydrogen Energy 39 (214) 5388-5398.10.1016/j.ijhydene.2013.11.070 ↗
44. Properties, degradation and high temperature fuel cell test of different types of PBI and PBI-blend membranes10.1016/j.memsci.2009.10.032 ↗
45. Long term testing of a high-temperature proton exchange membrane fuel cell short stack operated with improved polybenzimidazole-based composite membranes10.1016/j.jpowsour.2014.08.136 ↗
46. Preparation and characterization of sulfonated polysulfone/titanium dioxide composite membranes for proton exchange membrane fuel cells10.1016/j.ijhydene.2009.02.019 ↗
47. Preparation of sulfonated poly(ether ether ketone) (SPEEK) membrane using ethanol/water mixed solvent10.1016/j.matlet.2016.01.099 ↗
48. Polyhedral oligomeric silsesquioxane (POSS) nano‐composite separation membranes − A review10.1002/adem.201800667 ↗
49. Multilayer sulfonated polyhedral oligosilsesquioxane (S-POSS)-Sulfonated polyphenylsulfone (S-PPSU) composite proton exchange membranes10.1021/cm901820s ↗
50. A multiphase mixture model for multiphase, multi-component transport in capillary porous media – I: model development10.1016/0017-9310(96)00036-1 ↗
51. Multiphase transport phenomena in the diffusion zone of a PEM fuel cell10.1115/1.2039108 ↗
52. Bird · 2002
53. Multiphase transport phenomena in the diffusion zone of a PEM fuel cell10.1115/1.2039108 ↗
54. Boundary and inertia effects on flow and heat transfer in porous media10.1016/0017-9310(81)90027-2 ↗
55. Kaviany · 1995
56. A two-dimensional steady-state model for phosphoric acid fuel cells (PAFC)10.1016/S0378-7753(02)00369-5 ↗
57. Numerical simulation of two-phase crossflow in the gas diffusion layer microstructure of proton exchange membrane fuel cells10.1002/er.3867 ↗
58. Two-phase flow dynamics in a gas diffusion layer - gas channel–microporous layer system10.1016/j.jpowsour.2020.228427 ↗