journal article·2021-02

An ultralight-weight polymer electrolyte fuel cell based on woven carbon fiber-resin reinforced bipolar plate

Hyunguk Choi, Dong Jun Seo, Won Young Choi, Seo Won Choi, Myeong Hwa Lee, Young Je Park, Tae Young Kim, Young Gi Yoon, Sung-Chul Yi, Chi-Young Jung

Publisher page

Abstract

Abstract Exploration towards the lightweight bipolar plate, composed of cheap and abundant materials, is of great importance to accelerate the commercialization of polymer electrolyte fuel cells (PEFCs). Herein, new bipolar plate is fabricated by carbon fiber plate reinforced with polymeric resin, to alternate the conventional graphite composite (GBP) and metallic ones (MBP). Unlike the previous studies, the woven-type carbon fiber bipolar plates (CFBPs), with an initial thickness of 300 μm, have physically been grinded to 270, 220 and 170 μm, then followed by the deposition of conductive carbon layer, in order to reduce both bulk and interfacial contact resistances. Remarkably, the resultant CFBP even with metallic mesh flow fields exhibited less than 14.6% and 23.6% weight of the GBP and MBP, respectively, which doubles the gravimetric cell power density. Three key properties, i.e., electrical conductivity, mechanical strength and gas permeability, fully satisfied the US DOE's 2020 targets. Furthermore, the PEFC employing the proposed CFBP with metallic mesh flow field showed notable improvements in the ohmic and mass-transport performance, confirmed by both cell polarization and electrochemical impedance spectroscopy. Given the excellent gravimetric power density, this work may draw the first step toward a newly-structured PEFC for an automotive, marinomotive and, particularly, aeromotive powertrain applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Electrocatalyst approaches and challenges for automotive fuel cells10.1038/nature11115 ↗
2. Toward sustainable fuel cells10.1126/science.aal3303 ↗
3. Batteries and fuel cells for emerging electric vehicle markets10.1038/s41560-018-0108-1 ↗
4. The role of hydrogen and fuel cells in the global energy system10.1039/C8EE01157E ↗
5. Mechanism and effects of mechanical compression and dimensional change in polymer electrolyte fuel cells – a review10.1016/j.jpowsour.2015.02.111 ↗
6. From the cell to the stack. A chronological walk through the techniques to manufacture the PEFCs core10.1016/j.rser.2018.07.036 ↗
7. Expert assessments of the cost and expected future performance of proton exchange membrane fuel cells for vehicles10.1073/pnas.1804221116 ↗
8. A review of metal separator plate materials suitable for automotive PEM fuel cells10.1039/B813231N ↗
9. Stainless steel as a bipolar plate material for solid polymer fuel cells10.1016/S0378-7753(99)00524-8 ↗
10. Bipolar plate materials for solid polymer fuel cells10.1023/A:1003831406406 ↗
11. New lightweight bipolar plate system for polymer electrolyte membrane fuel cells10.1016/S0378-7753(01)00568-7 ↗
12. Surface modification and development of titanium bipolar plates for PEM fuel cells10.1016/j.jpowsour.2006.01.020 ↗
13. Performance of the gold-plated titanium bipolar plates for the light weight PEM fuel cells10.1016/j.jpowsour.2006.06.084 ↗
14. The development of economical bipolar plates for fuel cells10.1039/b611883f ↗
15. An investigation of coated aluminium bipolar plates for PEMFC10.1016/j.apenergy.2012.06.045 ↗
16. Composite-coated aluminum bipolar plates for PEM fuel cells10.1016/j.jpowsour.2012.12.074 ↗
17. Investigation of single-layer and multilayer coatings for aluminum bipolar plate in polymer electrolyte membrane fuel cell10.1016/j.ijhydene.2014.03.136 ↗
18. Ferritic stainless steels as bipolar plate material for polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2003.09.075 ↗
19. Bipolar plates for PEM fuel cells: a review10.1016/j.ijhydene.2005.04.016 ↗
20. Graphene grown on stainless steel as a high-performance and ecofriendly anti-corrosion coating for polymer electrolyte membrane fuel cell bipolar plates10.1016/j.jpowsour.2015.02.055 ↗
21. Multilayer graphene for long-term corrosion protection of stainless steel bipolar plates for polymer electrolyte membrane fuel cell10.1016/j.jpowsour.2015.06.009 ↗
22. Formation of 3D graphene-Ni foam heterostructures with enhanced performance and durability for bipolar plates in a polymer electrolyte membrane fuel cell10.1039/C7TA07598G ↗
23. Graphene-based bipolar plates for polymer electrolyte membrane fuel cells10.1007/s11706-019-0465-0 ↗
24. Electrodeposited conductive polypyrrole/polyaniline composite film for the corrosion protection of copper bipolar plates in proton exchange membrane fuel cells10.1016/j.jpowsour.2015.10.027 ↗
25. Anti-corrosion and conductivity of the electrodeposited graphene/polypyrrole composite coating for metallic bipolar plates10.1016/j.porgcoat.2019.105237 ↗
26. Superior conducting polypyrrole anti-corrosion coating containing functionalized carbon powders for 304 stainless steel bipolar plates in proton exchange membrane fuel cells10.1016/j.cej.2020.124675 ↗
27. Influence of microporous layer on corrosion of metallic bipolar plates in fuel cells10.1016/j.jpowsour.2019.02.005 ↗
28. Characterization techniques for gas diffusion layers for proton exchange membrane fuel cells – a review10.1016/j.jpowsour.2012.04.026 ↗
29. The effect of non-uniform compression and flow-field arrangements on membrane electrode assemblies - X-ray computed tomography characterisation and effective parameter determination10.1016/j.jpowsour.2019.04.018 ↗
30. Fabrication of high strength and a low weight composite bipolar plate for fuel cell applications10.1016/j.jpowsour.2007.04.049 ↗
31. Fabrication of catalyst-coated membrane by modified decal transfer technique10.1016/j.elecom.2010.01.006 ↗
32. High performance polymeric bipolar plate based on polypropylene/graphite/graphene/nano-carbon black composites for PEM fuel cells10.1016/j.renene.2016.07.062 ↗
33. Comparison of test methods for oxygen permeability: optical method versus carrier gas method10.1016/j.polymertesting.2017.08.006 ↗
34. Ultrahigh PEMFC performance of a thin‐film, dual‐electrode assembly with tailored electrode morphology10.1002/cssc.201301043 ↗
35. Development of a cost model for the production of carbon fibres10.1016/j.heliyon.2019.e02698 ↗
36. Toyota MIRAI fuel cell vehicle and progress toward a future hydrogen society10.1149/2.F03152if ↗
37. The effect of milled carbon fibre filler on electrical conductivity in highly conductive polymer composites10.1016/j.compositesb.2016.11.021 ↗
38. Prediction of the tensile strength of unidirectional carbon fiber composites considering the interfacial shear strength10.1016/j.compstruct.2017.02.060 ↗
39. Department of Energy
40. A graphite-coated carbon fiber epoxy composite bipolar plate for polymer electrolyte membrane fuel cell10.1016/j.jpowsour.2011.06.102 ↗
41. Investigation of bipolar plate materials for proton exchange membrane fuel cells10.1016/j.ijhydene.2016.05.163 ↗
42. Stainless steel bipolar plates for proton exchange membrane fuel cells: materials, flow channel design and forming processes10.1016/j.jpowsour.2020.227783 ↗
43. Study on metallic bipolar plate for proton exchange membrane fuel cell10.1016/j.jpowsour.2006.04.064 ↗
44. Carbon corrosion in PEM fuel cells and the development of accelerated stress tests10.1149/2.0061806jes ↗
45. Enhanced water management of polymer electrolyte fuel cells with additive-containing microporous layers10.1021/acsaem.8b01059 ↗
46. Effect of contaminant mixtures in air on proton exchange membrane fuel cell performance10.1016/j.jpowsour.2018.12.023 ↗
47. Exploring the use of electrochemical impedance spectroscopy (EIS) in microbial fuel cell studies10.1039/B814914C ↗