journal article·2020-02

Combining composition graded positive and negative electrodes for higher performance Li-ion batteries

Chuan Cheng, Ross Drummond, Stephen R. Duncan, Patrick S. Grant

Publisher page

Abstract

Homogeneous electrode structures used in Li-ion batteries (LIB) lead to inhomogeneous active material utilization and gradients of overpotential and Li-ion concentration at the cell-scale, which are detrimental for both capacity retention at high charge-discharge rates and for battery life-time. To account for these gradients, we demonstrate that heterogenous electrode structures with engineered gradients in material distribution can improve LIB C-rate and long-term cycling performance when compared with conventional uniform electrodes in LiFePO4 || Li4Ti5O12 full-cell LIBs. An improvement in C-rate performance of > 120% and a capacity degradation rate reduced to <50% over uniform electrode cells was achieved at 1C, and graded cells showed a dramatically improved power-energy density balance. Graded electrodes had a relatively low cell polarization that became more marked as the C-rate increased. Cycled graded electrodes had reduced solid electrolyte interphase (SEI) formation when compared with uniform electrodes according to XPS surface analysis, which was consistent with their reduced charge transfer resistance measured by impedance spectroscopy. The origin of the improved performance arises from a more uniform overpotential distribution across the thickness of the graded hetero-electrodes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Cathode manufacturing for lithium-ion batteries
2. Toward low-cost, high-energy density, and high-power density lithium-ion batteries
3. The effects of electrode thickness on the electrochemical and thermal characteristics of lithium ion battery10.1016/j.apenergy.2014.11.051 ↗
4. High-performance battery electrodes via magnetic templating10.1038/nenergy.2016.99 ↗
5. Magnetically aligned graphite electrodes for high-rate performance Li-ion batteries10.1038/nenergy.2016.97 ↗
6. Design of battery electrodes with dual-scale porosity to minimize tortuosity and maximize performance10.1002/adma.201204055 ↗
7. Highly-structured, additive-free lithium-ion cathodes by freeze-casting technology
8. Fabrication of low-tortuosity ultrahigh-area-capacity battery electrodes through magnetic alignment of emulsion-based slurries
9. Experimental and simulation investigations of porosity graded cathodes in mitigating battery degradation of high voltage lithium-ion batteries10.1149/2.1021713jes ↗
10. A two layer electrode structure for improved Li Ion diffusion and volumetric capacity in Li Ion batteries10.1016/j.nanoen.2016.11.043 ↗
11. Multi-scale engineered Si-SiO2 nanocomposite electrodes for lithium ion batteries using layer-by-layer spray deposition10.1021/acsami.8b00370 ↗
12. Comparative study of lithium transport kinetics in olivine cathodes for Li-ion batteries10.1021/cm902118m ↗
13. Identifying degradation mechanisms in lithium-ion batteries with coating defects at the cathode10.1016/j.apenergy.2018.09.073 ↗
14. The impact of multi-layered porosity distribution on the performance of a lithium ion battery10.1016/j.apm.2018.04.001 ↗
15. A systematic approach for electrochemical-thermal modelling of a large format lithium-ion battery for electric vehicle application10.1016/j.jpowsour.2018.02.027 ↗
16. The role of nanotechnology in the development of battery materials for electric vehicles10.1038/nnano.2016.207 ↗
17. A comprehensive review of lithium-ion batteries used in hybrid and electric vehicles at cold temperatures10.1016/j.apenergy.2015.11.034 ↗
18. Concept of reliability and safety assessment of lithium-ion batteries in electric vehicles: basics, progress, and challenges10.1016/j.apenergy.2019.113343 ↗
19. A microscopic investigation of ion and electron transport in lithium-ion battery porous electrodes using the lattice Boltzmann method10.1016/j.apenergy.2016.10.125 ↗
20. A mass transfer based variable porosity model with particle radius change for a Lithium-ion battery10.1016/j.electacta.2017.02.129 ↗
21. Design of bi-tortuous, anisotropic graphite anodes for fast ion-transport in Li-ion batteries10.1149/2.0151508jes ↗
22. Effect of porosity, thickness and tortuosity on capacity fade of anode10.1149/2.0061509jes ↗
23. Micro-scale modeling of Li-ion batteries: parameterization and validation10.1149/2.096205jes ↗
24. On graded electrode porosity as a design tool for improving the energy density of batteries10.1149/2.0301603jes ↗
25. In-situ observation of inhomogeneous degradation in large format Li-ion cells by neutron diffraction10.1016/j.jpowsour.2013.02.066 ↗
26. XPS-surface analysis of SEI layers on Li-Ion cathodes: part I. investigation of initial surface chemistry10.1149/2.0061805jes ↗
27. XPS-surface analysis of SEI layers on Li-Ion cathodes: part II. SEI-composition and formation inside composite electrodes10.1149/2.0881803jes ↗
28. Micro-scale graded electrodes for improved dynamic and cycling performance of Li-ion batteries10.1016/j.jpowsour.2018.12.021 ↗
29. Ultimate limits to intercalation reactions for lithium batteries10.1021/cr5003003 ↗
30. Nickel-rich layered cathode materials for automotive lithium-ion batteries: achievements and perspectives10.1021/acsenergylett.6b00594 ↗
31. Is there a benefit in employing graded electrodes for lithium-ion batteries?10.1149/2.1051713jes ↗
32. Spray printing of self-assembled porous structures for high power battery electrodes10.1039/C8TA02920B ↗
33. Spray processing of TiO2 nanoparticle/ionomer coatings on carbon nanotube scaffolds for solid-state supercapacitors10.1039/c4ta02188f ↗
34. One-step spray processing of high power all-solid-state supercapacitors10.1038/srep02393 ↗
35. Safe and green Li-ion batteries based on LiFePO4 and Li4Ti5O12 sprayed as aqueous slurries with xanthan gum as common binder10.1016/j.mtener.2019.01.008 ↗
36. The surface coating of commercial LiFePO4 by utilizing ZIF-8 for high electrochemical performance lithium ion battery10.1007/s40820-017-0154-4 ↗
37. Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy. I. Experimental investigation10.1016/j.jpowsour.2010.12.102 ↗
38. Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy. II: Modelling10.1016/j.jpowsour.2010.07.071 ↗
39. Orazem · 2008
40. Fast impedance simulation of lithium-ion batteries with pseudo-two dimensional electrochemical models10.1149/2.0831805jes ↗
41. Nordh · 2015
42. Effect of solid electrolyte interface (SEI) film on cyclic performance of Li4Ti5O12 anodes for Li ion batteries10.1016/j.jpowsour.2013.03.141 ↗
43. Verde · ACS Nano · 2016 · 10 · 431210.1021/acsnano.5b07875 ↗
44. Ultrathin LiFePO4 nanosheets self-assembled with reduced graphene oxide applied in high rate lithium ion batteries for energy storage10.1016/j.apenergy.2016.06.047 ↗
45. Overcoming diffusion limitations in supercapacitors using layered electrodes10.1016/j.jpowsour.2019.04.107 ↗
46. Observer design for the Doyle–Fuller–Newman Li-ion battery model without electrolyte dynamics10.1016/j.est.2019.02.012 ↗