Physical, on the fly, capacity degradation prediction of LiNiMnCoO2-graphite cells
Source abstract
Abstract
Abstract A physics-based, reduced order model was developed to describe the capacity degradation in LiNiMnCoO2-graphite cells. By starting from fundamental principles, the model captures the effects of four degradation mechanisms: (i) SEI growth on the anode, (ii) electrolyte oxidation on the cathode, (iii) anode active material loss, and (iv) cathode active material loss, the last two due to chemomechanical fracture. The model is computationally efficient (∼1 ms/cycle) and enables physical, real-time, capacity loss calculations for automotive applications. Results demonstrate that under storage conditions, SEI growth and electrolyte oxidation are the major degradation mechanisms, in agreement with experiments. In contrast, batteries subjected to electric currents of a wide amplitude, close to the upper cutoff voltage, electrolyte oxidation contributes ∼50% of all the degradation mechanisms, consistent with recent experiments in the literature. Chemomechanically induced active material losses are maximal in the anode at high states of charge and maximal in the cathode at low states of charge. Results quantify the contribution to degradation from each individual mechanism, highlighting, for the first time, the need of physics-based, on-the-fly descriptions that go beyond traditional coulomb counting approaches. Finally, the identification of the individual degradation contributions enables the possibility of tailoring the charge/discharge sequence to extend battery life.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. The development and future of lithium ion batteries10.1149/2.0251701jes ↗
2. Design-space exploration of series plug-in hybrid electric vehicles for medium-duty truck applications in a total cost-of-ownership framework10.1016/j.apenergy.2017.05.090 ↗
3. Charging, power management, and battery degradation mitigation in plug-in hybrid electric vehicles: a unified cost-optimal approach10.1016/j.ymssp.2016.03.004 ↗
4. Pillot · 2017
5. Using high precision coulometry measurements to compare the degradation mechanisms of NMC/LMO and NMC-only automotive scale pouch cells10.1149/2.0971409jes ↗
6. Identify capacity fading mechanism in a commercial LiFePO4 cell10.1016/j.jpowsour.2009.05.036 ↗
7. A theory and a simulation capability for the growth of a solid electrolyte interphase layer at an anode particle in a Li-ion battery10.1016/j.jmps.2015.02.013 ↗
8. Theory of SEI formation in rechargeable batteries: capacity fade, accelerated aging and lifetime prediction10.1149/2.044302jes ↗
9. A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries10.1016/j.electacta.2010.05.072 ↗
10. The role of cations on the performance of lithium ion batteries: a quantitative analytical approach10.1021/acs.accounts.7b00523 ↗
11. Nonaqueous liquid electrolytes for lithium-based rechargeable batteries10.1021/cr030203g ↗
12. Kinetic study of parasitic reactions in lithium-ion batteries: a case study on LiNi0.6Mn0.2Co0.2O210.1021/acsami.5b11800 ↗
13. Interfacial reactions in lithium batteries10.1088/1361-6463/aa7315 ↗
14. Revisiting the corrosion of the aluminum current collector in lithium-ion batteries10.1021/acs.jpclett.6b02933 ↗
15. Predicting and extending the lifetime of Li-ion batteries10.1149/2.060309jes ↗
16. Determination of the voltage dependence of parasitic heat flow in lithium ion cells using isothermal microcalorimetry10.1149/2.0301412jes ↗
17. Study of the failure mechanisms of LiNi0.8Mn0.1Co0.1O2 cathode material for lithium ion batteries10.1149/2.1011507jes ↗
18. Improving the long-term cycling performance of lithium-ion batteries at elevated temperature with electrolyte additives10.1016/j.jpowsour.2015.04.070 ↗
19. The study of the anodic stability of alkyl carbonate solutions by in situ FTIR spectroscopy, EQCM, NMR and MS10.1016/S0022-0728(00)00457-5 ↗
20. Chemical versus electrochemical electrolyte oxidation on NMC111, NMC622, NMC811, LNMO, and conductive carbon10.1021/acs.jpclett.7b01927 ↗
21. Electrolytes and interphases in Li-ion batteries and beyond10.1021/cr500003w ↗
22. Ageing mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.01.006 ↗
23. Improved capacity retention in rechargeable 4 V lithium/lithium-manganese oxide (spinel) cells10.1016/0167-2738(94)90450-2 ↗
24. A causal study of the capacity fading of Li1.01Mn1 99O4 cathode at 80∘C , and the suppressing substances of its fading10.1016/S0378-7753(01)00479-7 ↗
25. Transition metal dissolution, ion migration, electrocatalytic reduction and capacity loss in lithium-ion full cells10.1149/2.1111702jes ↗
26. Capacity fading of LixMn2O4 spinel electrodes studied by xrd and electroanalytical techniques10.1016/S0378-7753(99)00204-9 ↗
27. The mechanics of large-volume-change transformations in high-capacity battery materials10.1016/j.eml.2016.03.004 ↗
28. Fracture of electrodes in lithium-ion batteries caused by fast charging10.1063/1.3492617 ↗
29. Threefold increase in the Young's modulus of graphite negative electrode during lithium intercalation10.1149/1.3327913 ↗
30. Diagnostic evaluation of detrimental phenomena in 13C-labeled composite cathodes for Li-ion batteries10.1016/j.jpowsour.2007.06.195 ↗
31. Effect of porosity on the capacity fade of a lithium-ion battery theory10.1149/1.1759972 ↗
32. Investigation of particle isolation in Li-ion battery electrodes using 7Li NMR spectroscopy10.1016/j.elecom.2005.09.003 ↗
33. Anisotropic lattice strain and mechanical degradation of high-and low-nickel NCM cathode materials for Li-ion batteries10.1021/acs.jpcc.6b12885 ↗
34. Mechanical and structural degradation of LiNixMnyCozO2 cathode in Li-ion batteries: an experimental study10.1149/2.1751713jes ↗
35. Solid-state chemistry and electrochemistry of LiCo1/3Ni1/3Mn1/3O2 for advanced lithium-ion batteries III. Rechargeable capacity and cycleability10.1149/1.2455585 ↗
36. Comparison of the structural and electrochemical properties of layered LiNixCoyMnzO2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries10.1016/j.jpowsour.2013.01.063 ↗
37. Capacity fade mechanisms and side reactions in lithium-ion batteries10.1149/1.1838857 ↗
38. Modeling side reactions in composite LiyMn2O4 electrodes10.1149/1.1838376 ↗
39. A comprehensive capacity fade model and analysis for Li-ion batteries10.1149/2.040310jes ↗
40. Studies of local degradation phenomena in composite cathodes for lithium-ion batteries10.1016/j.electacta.2007.02.085 ↗
41. Modeling lithium ion battery degradation in electric vehicles
42. A new neural network model for the state-of-charge estimation in the battery degradation process10.1016/j.apenergy.2014.01.066 ↗
43. Comparative study of a structured neural network and an extended Kalman filter for state of health determination of lithium-ion batteries in hybrid electric vehicles10.1016/j.engappai.2012.09.013 ↗
44. Lithium-ion battery remaining useful life estimation based on fusion nonlinear degradation AR model and RPF algorithm10.1007/s00521-013-1520-x ↗
45. Practical capacity fading model for Li-ion battery cells in electric vehicles10.1109/TPEL.2012.2235083 ↗
46. Lithium-ion batteries life estimation for plug-in hybrid electric vehicles
47. Degradation of lithium ion batteries employing graphite negatives and nickel–cobalt–manganese oxide + spinel manganese oxide positives: Part 1, aging mechanisms and life estimation10.1016/j.jpowsour.2014.07.030 ↗
48. Capacity fade model for spinel LiMn2O4 electrode10.1149/2.026302jes ↗
49. Mathematical modeling of the capacity fade of Li-ion cells10.1016/S0378-7753(03)00531-7 ↗
50. Development of first principles capacity fade model for Li-ion cells10.1149/1.1634273 ↗
51. Physically-based reduced-order capacity loss model for graphite anodes in Li-ion battery cells10.1016/j.jpowsour.2016.12.099 ↗
52. Cycle-life model for graphite-LiFePO4 cells10.1016/j.jpowsour.2010.11.134 ↗
53. Life prediction model for grid-connected Li-ion battery energy storage system
54. Improvement of natural graphite as a lithium-ion battery anode material, from raw flake to carbon-coated sphere10.1039/b316702j ↗
55. Aqueous processing of natural graphite particulates for lithium-ion battery anodes and their electrochemical performance10.1016/j.jpowsour.2005.01.022 ↗
56. Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteries10.1038/ncomms4529 ↗
57. Dynamic behaviour of interphases and its implication on high-energy-density cathode materials in lithium-ion batteries10.1038/ncomms14589 ↗
58. Disintegration of meatball electrodes for LiNixMnyCozO2 cathode materials10.1007/s11340-017-0292-0 ↗
59. Simulation-based analysis of aging phenomena in a commercial graphite/LiFePO4 cell10.1149/2.103112jes ↗
60. Aging of a commercial graphite/LiFePO4 cell10.1149/1.3614529 ↗
61. Kalupson · 2013
62. Multimodal physics-based aging model for life prediction of Li-ion batteries10.1149/1.3043429 ↗
63. “Electrochemical shock” of intercalation electrodes: a fracture mechanics analysis10.1149/1.3464773 ↗
64. The mechanism of HF formation in LiPF6 based organic carbonate electrolytes10.1016/j.elecom.2011.10.026 ↗
65. Bard · 2001
66. Limits of flammability of gaseous mixtures
67. Calendar and cycle life study of Li(NiMnCo)O2-based 18650 lithium-ion batteries10.1016/j.jpowsour.2013.09.143 ↗
68. 2019
69. Nonlinear aging characteristics of lithium-ion cells under different operational conditions10.1016/j.est.2015.05.003 ↗
70. Impedance change and capacity fade of lithium nickel manganese cobalt oxide-based batteries during calendar aging10.1016/j.jpowsour.2017.03.090 ↗
71. Pedregosa · 2018
72. A comparative study and validation of state estimation algorithms for Li-ion batteries in battery management systems10.1016/j.apenergy.2015.05.102 ↗
73. Lithium dendrite growth mechanisms in liquid electrolytes10.1016/j.nanoen.2017.08.056 ↗
74. Evaluation of commercial lithium-ion cells based on composite positive electrode for plug-in hybrid electric vehicle applications. Part I: initial characterizations10.1016/j.jpowsour.2011.08.077 ↗
75. Temperature dependent ageing mechanisms in Lithium-ion batteries–A Post-Mortem study10.1016/j.jpowsour.2014.03.112 ↗
76. Applicability of available Li-ion battery degradation models for system and control algorithm design10.1016/j.conengprac.2017.10.002 ↗
77. Aging mechanisms of LiFePO4 batteries deduced by electrochemical and structural analyses10.1149/1.3294790 ↗