journal article·2017-01

Maximizing the power density of aqueous electrochemical flow cells with in operando deposition

Marc-Antoni Goulet, Omar A. Ibrahim, Will H.J. Kim, Erik Kjeang

Publisher page

Abstract

Abstract To transition toward sustainable energy systems, next generation power sources must provide high power density at minimum cost. Using inexpensive and environmentally friendly fabrication methods, this work describes a room temperature electrochemical flow cell with a maximum power density of 2.01 W cm −2 or 13.4 W cm −3 . In part, this is achieved by minimizing ohmic resistance through decreased electrode spacing, implementation of current collectors and improvement of electrolyte conductivity. The majority of the performance gain is provided by a novel in operando dynamic flowing deposition method for which the cell design has been optimized. Carbon nanotubes (CNTs) are deposited dynamically at the entrance of and within the carbon paper electrodes during operation of the cell. A natural equilibrium is reached between deposition and detachment of CNTs at which the electrochemical surface area and pore size distribution of the flow-through porous electrodes are greatly enhanced. In this way, the novel deposition method more than doubles the power density of the cell and sets a new performance benchmark for what is practically attainable with aqueous electrochemical flow cells. Overall, it is expected that the design and operation methods illustrated here will enable a wide range of electrochemical flow cell technologies to achieve optimal performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced battery technologies research · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Towards greener and more sustainable batteries for electrical energy storage10.1038/nchem.2085 ↗
2. Flow batteries: current status and trends10.1021/cr500720t ↗
3. Membraneless vanadium redox fuel cell using laminar flow10.1021/ja020812q ↗
4. Microfluidic fuel cell based on laminar flow10.1016/j.jpowsour.2003.11.052 ↗
5. Membrane-less hydrogen bromine flow battery10.1038/ncomms3346 ↗
6. Microfluidic redox battery10.1039/c3lc50499a ↗
7. A dual electrolyte H2/O2 planar membraneless microchannel fuel cell system with open circuit potentials in excess of 1.4 V10.1021/la0479307 ↗
8. Air-breathing laminar flow-based microfluidic fuel cell10.1021/ja054599k ↗
9. Electricity generation from decomposition of hydrogen peroxide10.1149/1.1849112 ↗
10. Investigation of fuel and media flexible laminar flow-based fuel cells10.1016/j.electacta.2009.07.011 ↗
11. Kjeang · 2014
12. Co-laminar flow cells for electrochemical energy conversion10.1016/j.jpowsour.2014.03.009 ↗
13. Toward five-dimensional scaling: how density improves efficiency in future computers10.1147/JRD.2011.2165677 ↗
14. Electrochemical performance of a glucose/oxygen microfluidic biofuel cell10.1016/j.jpowsour.2009.04.066 ↗
15. Membraneless glucose/O2 microfluidic enzymatic biofuel cell using pyrolyzed photoresist film electrodes10.1039/c3lc50319d ↗
16. Perspective use of direct human blood as an energy source in air-breathing hybrid microfluidic fuel cells10.1016/j.jpowsour.2015.04.089 ↗
17. Microfluidic fuel cells on paper: meeting the power needs of next generation lateral flow devices10.1039/C3EE44044C ↗
18. In situ enhancement of flow-through porous electrodes with carbon nanotubes via flowing deposition10.1016/j.electacta.2016.04.147 ↗
19. M.-A. Goulet, E. Kjeang, Process of increasing energy conversion and electrochemical efficiency of a scaffold using a deposition material, (2015) US Patent Application 14/842,812.
20. Reactant recirculation in electrochemical co-laminar flow cells10.1016/j.electacta.2014.03.092 ↗
21. A microfluidic fuel cell with flow-through porous electrodes10.1021/ja078248c ↗
22. Direct measurement of electrochemical reaction kinetics in flow-through porous electrodes10.1016/j.elecom.2015.04.019 ↗
23. Chip-embedded thin film current collector for microfluidic fuel cells10.1016/j.ijhydene.2012.02.155 ↗
24. Pathways to low-cost electrochemical energy storage: a comparison of aqueous and nonaqueous flow batteries10.1039/C4EE02158D ↗
25. Lide · 2010
26. Vegetation and river channel dynamics10.1111/j.1541-0064.1984.tb00779.x ↗
27. A switchable pH-differential unitized regenerative fuel cell with high performance10.1016/j.jpowsour.2016.02.092 ↗
28. Three dimensional N-doped graphene/PtRu nanoparticle hybrids as high performance anode for direct methanol fuel cells10.1039/c3ta14809b ↗
29. High power density direct formic acid fuel cells10.1016/j.jpowsour.2003.11.051 ↗
30. High performance hydrogen/bromine redox flow battery for grid-scale energy storage10.1149/2.018211jes ↗
31. High power density redox flow battery cells10.1149/05307.0007ecst ↗
32. Alkaline fuel cells applications10.1016/S0378-7753(99)00429-2 ↗
33. A historical perspective of fuel cell technology in the 20th century10.1149/1.1488651 ↗
34. A membrane-less electrolyzer for hydrogen production across the pH scale10.1039/C5EE00083A ↗
35. Investigation of carbon materials for use as a flowable electrode in electrochemical flow capacitors10.1016/j.electacta.2013.03.037 ↗
36. Effects of flow cell design on charge percolation and storage in the carbon slurry electrodes of electrochemical flow capacitors10.1016/j.jpowsour.2013.08.101 ↗
37. Modeling of flowable slurry electrodes with combined faradaic and nonfaradaic currents10.1016/j.ces.2016.01.048 ↗
38. A high performance pseudocapacitive suspension electrode for the electrochemical flow capacitor10.1016/j.electacta.2013.08.095 ↗
39. The electrochemical flow capacitor: a new concept for rapid energy storage and recovery10.1002/aenm.201100768 ↗
40. Slurry electrodes for iron plating in an all-iron flow battery10.1016/j.jpowsour.2015.06.050 ↗
41. Graphene oxide nanosheets/multi-walled carbon nanotubes hybrid as an excellent electrocatalytic material towards VO2+/VO2+ redox couples for vanadium redox flow batteries10.1039/c1ee01776d ↗
42. Carbon felt supported carbon nanotubes catalysts composite electrode for vanadium redox flow battery application10.1016/j.jpowsour.2012.07.081 ↗
43. Nitrogen-doped carbon nanotube/graphite felt as advanced electrode materials for vanadium redox flow batteries10.1021/jz3008744 ↗