Modeling a 5 kWe planar solid oxide fuel cell based system operating on JP-8 fuel and a comparison with tubular cell based system for auxiliary and mobile power applications
Source abstract
Abstract
Abstract A steady state planar solid oxide fuel cell (P-SOFC) based system operating on desulfurized JP-8 fuel was modeled using Aspen Plus simulation software for auxiliary and mobile power applications. An onboard autothermal reformer (ATR) employed to reform the desulfurized JP-8 fuel was coupled with the P-SOFC stack to provide for H 2 and CO as fuel, minimizing the cost and complexity associated with hydrogen storage. Characterization of the ATR reformer was conducted by varying the steam to carbon ratio (H 2 O/C) from 0.1 to 1.0 at different ATR operating temperatures (700–800 °C) while maintaining the P-SOFC stack temperature at 850 °C. A fraction of the anode recycle was used as the steam and heat source for autothermal reforming of the JP-8 fuel, intending to make the system lighter and compact for mobile applications. System modeling revealed a maximum net AC efficiency of 37.1% at 700 °C and 29.2% at 800 °C ATR operating temperatures, respectively. Parametric analyses with respect to fuel utilization factor ( U f ) and current density ( j ) were conducted to determine optimum operating conditions. Finally, the P-SOFC based system was compared with a previously published [1] tubular solid oxide fuel cell based (T-SOFC) system to identify the relative advantages over one another.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Chemical Looping and Thermochemical Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Tanim · J. Power Sources · 2013 · 221 · 38710.1016/j.jpowsour.2012.08.024 ↗
2. Li · J. Fuel Cell Sci. Technol. · 2010 · 710.1115/1.4000687 ↗
3. Kazempoor · Fuel Cells · 2010 · 10 · 107410.1002/fuce.200900082 ↗
4. Musa · Int. J. Hydrogen Energy · 2008 · 33 · 466510.1016/j.ijhydene.2008.05.093 ↗
5. Singhal · 2003
6. Patil · J. Power Sources · 2004 · 136 · 22010.1016/j.jpowsour.2004.03.009 ↗
7. Stangl · 2005
8. Lutsey · J. Transp. Res. Board · 2003 · 3443 · 11810.3141/1842-14 ↗
9. Santarelli · J. Fuel Cell Sci. Technol. · 2010 · 710.1115/1.3176282 ↗
10. Doherty · Energy · 2010 · 35 · 454510.1016/j.energy.2010.04.051 ↗
11. Zhang · Energy Convers. Manag. · 2005 · 46 · 18110.1016/j.enconman.2004.03.002 ↗
12. Campanari · J. Power Sources · 2004 · 132 · 11310.1016/j.jpowsour.2004.01.043 ↗
13. Campanari · J. Power Sources · 2001 · 92 · 2610.1016/S0378-7753(00)00494-8 ↗
14. Colpan · Int. J. Energy Res. · 2008 · 32 · 33610.1002/er.1363 ↗
15. Chan · J. Power Sources · 2001 · 93 · 13010.1016/S0378-7753(00)00556-5 ↗
16. Costamagna · Chem. Eng. J. · 2004 · 102 · 6110.1016/j.cej.2004.02.005 ↗
17. Sadhukhan · Chem. Eng. Sci. · 2010 · 65 · 194210.1016/j.ces.2009.11.022 ↗
18. 2011
19. Van herle · J. Power Sources · 2003 · 118 · 37510.1016/S0378-7753(03)00103-4 ↗
20. Liu · Int. J. Hydrogen Energy · 2004 · 29 · 103510.1016/j.ijhydene.2003.11.009 ↗