Effect of urea as pore-forming agent on properties of poly(vinylidene fluoride-co-hexafluoropropylene)-based gel polymer electrolyte
Source abstract
Abstract
Abstract Poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP))-based gel polymer electrolyte (GPE) membranes are prepared by phase inversion method using urea as pore-forming agent and dimethylformamide as solvent, respectively, and the desired polymer electrolytes are obtained after being immersed the as-prepared polymer electrolyte membranes into liquid electrolytes for 1 h. Physicochemical properties of the GPEs are investigated by SEM, XRD, FT-IR, TG-DSC, EIS and LSV. When the weight ratio of urea to P(VDF-HFP) is up to 0.6:4, the results show that the polymer electrolyte membrane presents the most uniform surface with abundant interconnected micro-pores and excellent thermal stability, in which the ionic conductivity at room temperature can reach 2.671 mS cm−1 and the reciprocal temperature dependence of ionic conductivity follows Arrhenius relationship. The interfacial resistance of the Li/GPE/Li simulated cell with 0.6 g urea can rapidly increase to a steady value about 650 Ω cm−1 from the initial value about 475 Ω cm−1 during 15 days storage at 30 °C. The polymer electrolyte with 0.6 g urea can be stable at 5.3 V (vs Li/Li+) at room temperature and the assembled Li/GPE/LiCoO2 coin cell can also show good rate and cycle performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Fuel Cells and Related Materials · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Manuel Stephan · Eur. Polym. J. · 2006 · 42 · 2110.1016/j.eurpolymj.2005.09.017 ↗
2. Song · J. Power Sources · 1999 · 77 · 18310.1016/S0378-7753(98)00193-1 ↗
3. Zhang · J. Membr. Sci. · 2011 · 379 · 8010.1016/j.memsci.2011.05.043 ↗
4. Zhang · J. Power Sources · 2009 · 189 · 59410.1016/j.jpowsour.2008.09.100 ↗
5. Li · Electrochem. Commun. · 2008 · 10 · 188310.1016/j.elecom.2008.09.035 ↗
6. Chen · Electrochim. Acta · 2008 · 53 · 326210.1016/j.electacta.2007.10.058 ↗
7. Pu · J. Membr. Sci. · 2006 · 272 · 1110.1016/j.memsci.2005.12.038 ↗
8. Li · J. Power Sources · 2009 · 187 · 30510.1016/j.jpowsour.2008.11.126 ↗
9. Huang · J. Membr. Sci. · 2007 · 293 · 10010.1016/j.memsci.2007.02.001 ↗
10. Shieh · Polymer · 2006 · 47 · 592910.1016/j.polymer.2006.06.022 ↗
11. Wang · Mater. Chem. Phys. · 2003 · 82 · 1610.1016/S0254-0584(03)00241-4 ↗
12. Li · Electrochim. Acta · 2009 · 54 · 440310.1016/j.electacta.2009.03.016 ↗
13. Chen · Acta Phys. Chim. Sin. · 2011 · 27 · 6
14. Kim · Mater. Chem. Phys. · 2011 · 127 · 13710.1016/j.matchemphys.2011.01.046 ↗
15. Wu · J. Power Sources · 2011 · 196 · 863810.1016/j.jpowsour.2011.04.062 ↗
16. Karabelli · Electrochim. Acta · 2011 · 57 · 9810.1016/j.electacta.2011.03.033 ↗
17. Jeong · J. Membr. Sci. · 2010 · 364 · 17710.1016/j.memsci.2010.08.012 ↗
18. Oh · Electrochim. Acta · 2011 · 57 · 4610.1016/j.electacta.2011.05.029 ↗
19. Liu · J. Membr. Sci. · 2011 · 375 · 110.1016/j.memsci.2011.03.014 ↗
20. Deka · J. Power Sources · 2011 · 196 · 135810.1016/j.jpowsour.2010.09.035 ↗