journal article·2015-04

Residence time of water film and slug flow features in fuel cell gas channels and their effect on instantaneous area coverage ratio

Daniel Lorenzini-Gutierrez, Satish G. Kandlikar, Abel Hernandez-Guerrero, Francisco Elizalde-Blancas

Publisher page

Abstract

Abstract Water in the gas channels of a Proton Exchange Membrane Fuel Cell is modeled as slugs and film, and removal mechanisms for these flow patterns are numerically investigated. The removal of excess liquid water is simulated using computational fluid dynamics (CFD) through the volume of fluid (VOF) model. The computational domain consists of a gas flow channel appropriate for commercial stacks for automotive applications. The effects of superficial air velocity, channel surface wettability, and channel cross-section geometry are investigated through quantitative comparison of two-phase pressure drop, area coverage ratio (ACR) over the gas diffusion layer (GDL) and liquid removal time. Top wall film flow was identified as a desirable feature since it did not cover the GDL and facilitated transport of oxygen to the reaction sites while removing the water. A range of hydrophilic channel walls in combination with a hydrophobic GDL is proposed to promote this behavior while reducing the fluctuations in two-phase pressure drop for different contact angles. Additional enhancements to liquid water removal were associated with the channel cross-section geometry. An alternative trapezoidal shape is suggested for improved top wall film flow while improving the manufacturability of the bipolar plates for mass production.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Membrane Separation Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Beginning-of-life MEA Performance – Efficiency Loss Contributions
2. Voltage instability in a simulated fuel cell stack correlated to water accumulation measured via neutron radiography10.1016/j.jpowsour.2007.06.174 ↗
3. Water management studies in PEM fuel cells, Part I: fuel cell design and in situ water distributions10.1016/j.ijhydene.2008.12.100 ↗
4. Experimental characterization of the water transport properties of PEM fuel cells diffusion media10.1016/j.jpowsour.2012.05.069 ↗
5. Non-equilibrium two-phase model of the air-cathode of a PEM fuel cell based on GDL experimental water transport characteristics10.1016/j.jpowsour.2012.10.091 ↗
6. Visualization of water buildup in the cathode of a transparent PEM fuel cell10.1016/S0378-7753(03)00797-3 ↗
7. Liquid water removal from a polymer electrolyte fuel cell10.1149/1.2138675 ↗
8. Water flooding and two-phase flow in cathode channels of proton exchange membrane fuel cells10.1016/j.jpowsour.2005.06.027 ↗
9. Quantification and characterization of water coverage in PEMFC gas channels using simultaneous anode and cathode visualization and image processing10.1016/j.ijhydene.2011.06.092 ↗
10. Liquid water quantification in the cathode side gas channels of a proton exchange membrane fuel cell through two-phase flow visualization10.1016/j.jpowsour.2013.08.016 ↗
11. Study of water-flooding behaviour in cathode channel of a transparent proton-exchange membrane fuel cell10.1016/j.jpowsour.2006.01.002 ↗
12. Experimental investigation of liquid water formation and transport in a transparent single-serpentine PEM fuel cell10.1016/j.jpowsour.2007.04.020 ↗
13. Effect of compression on liquid water transport and microstructure of PEMFC gas diffusion layers10.1016/j.jpowsour.2006.09.045 ↗
14. Water management studies in PEM fuel cells, Part II: Ex situ investigation of flow maldistribution, pressure-drop and two-phase flow pattern in gas channels10.1016/j.ijhydene.2008.12.025 ↗
15. Water management studies in PEM fuel cells, Part IV: Effects of channel surface wettability, geometry and orientation on the two-phase flow in parallel gas channels10.1016/j.ijhydene.2011.04.226 ↗
16. Droplet and slug formation in polymer electrolyte membrane fuel cell flow channels: The role of interfacial forces10.1016/j.jpowsour.2011.08.084 ↗
17. Numerical investigation of water droplet dynamics in a low-temperature fuel cell microchannel: Effect of channel geometry10.1016/j.jpowsour.2009.08.021 ↗
18. Dynamics of water droplets detached from porous surfaces of relevance to PEM fuel cells10.1016/j.jcis.2006.04.021 ↗
19. Effects of surface microstructures of gas diffusion layer on water droplet dynamic behaviors in a micro gas channel of proton exchange membrane fuel cells10.1016/j.ijheatmasstransfer.2012.11.024 ↗
20. Direct simulation of liquid water dynamics in the gas channels of a polymer electrolyte fuel cell10.1149/2.004205jes ↗
21. Droplet dynamics in a polymer electrolyte fuel cell gas flow channel: forces, deformation and detachment. II: comparisons of analytical solution with numerical and experimental results10.1016/j.jpowsour.2012.03.033 ↗
22. Dynamic behavior of liquid water transport in a tapered channel of a proton exchange membrane fuel cell cathode10.1016/j.ijhydene.2010.11.096 ↗
23. Water droplet accumulation and motion in PEM (Proton Exchange Membrane) fuel cell mini-channels10.1016/j.energy.2011.10.023 ↗
24. Numerical study of water management in the air flow channel of a PEM fuel cell cathode10.1016/j.jpowsour.2006.09.110 ↗
25. Numerical simulation and experimental validation of liquid water behaviors in a proton exchange membrane fuel cell cathode with serpentine channels10.1016/j.jpowsour.2010.05.045 ↗
26. Three dimensional numerical simulation of gas-liquid two-phase flow patterns in a polymer-electrolyte membrane fuel cell gas flow channel10.1016/j.jpowsour.2011.03.100 ↗
27. 3D simulations of the impact of two-phase flow on PEM fuel cell performance10.1016/j.ces.2012.11.007 ↗
28. 2011
29. A continuum method for modeling surface tension10.1016/0021-9991(92)90240-Y ↗
30. Time-dependent multi-material flow with large fluid distortion
31. Water slug to drop and film transitions in gas-flow channels10.1021/la403057k ↗
32. Water slug formation and motion in gas flow channels: the effects of geometry, surface wettability, and gravity10.1021/la4011967 ↗
33. The role of the gas diffusion layer on slug formation in gas flow channels of fuel cells10.1016/j.ijhydene.2013.09.073 ↗
34. Effect of channel materials and trapezoidal corner angles on emerging droplet behavior in proton exchange membrane fuel cell gas channels10.1016/j.jpowsour.2013.09.070 ↗