Influence of pressure and temperature on the electrolyte filling of lithium-ion cells: Experiment, model and method
Source abstract
Abstract
Abstract Industrial filling of large lithium-ion cells with electrolyte liquid has a significant impact on the product quality and the production costs. This paper shows the influence of the process parameters, the pressure and the temperature, during dosing and wetting. A simple model based on a capillary is introduced and clarifies the relation between wetting and the process parameters. The model is compared to measurements of dosing and wetting experiments. The measurements were conducted using neutron radiography and electrochemical impedance spectroscopy. For industrial relevance, all experiments were carried out on PHEV1-cells with a capacity greater than 20 Ah. The results show a significant improvement in the wetting speed with elevated temperatures, low dosing pressure and moderate wetting pressure. The electrolyte reached all surfaces after 1.5 h for a refined choice of parameter combination. In contrast to a poor process design, where not even 40% of the area was wetted in the same time. This 2.5-fold wetting speed has significant advantages in terms of throughput and line utilization. The examined correlations lead to a methodical procedure for process design to overcome existing uncertainties in battery production.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Future generations of cathode materials: An automotive industry perspective10.1039/C5TA00361J ↗
2. Modeling and analysis of heat dissipation for liquid cooling lithium-ion batteries10.3390/en14144187 ↗
3. Comparative study of equivalent circuit models performance in four common lithium-ion batteries: LFP, NMC, LMO, NCA10.3390/batteries7030051 ↗
4. Current status and challenges for automotive battery production technologies10.1038/s41560-018-0130-3 ↗
5. Prospects for reducing the processing cost of lithium ion batteries10.1016/j.jpowsour.2014.11.019 ↗
6. Electrolyte filling of large-scale lithium-ion batteries: Main influences and challenges for production technology10.4028/www.scientific.net/AMM.794.11 ↗
7. Reaction of water with hexafluorophosphates and with Li bis(perfluoroethylsulfonyl)imide salt10.1149/1.1390838 ↗
8. Review of selected electrode–solution interactions which determine the performance of Li and Li ion batteries10.1016/S0378-7753(00)00431-6 ↗
9. Ageing mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.01.006 ↗
10. Aging mechanism in Li ion cells and calendar life predictions10.1016/S0378-7753(01)00722-4 ↗
11. Drying and moisture resorption behaviour of various electrode materials and separators for lithium-ion batteries10.1016/j.jpowsour.2017.08.009 ↗
12. Capacity fade mechanisms and side reactions in lithium-ion batteries10.1149/1.1838857 ↗
13. Moisture adsorption behavior in anodes for Li–Ion batteries10.1002/ente.201801162 ↗
14. Hysteresis behavior in the sorption equilibrium of water in anodes for Li-ion batteries10.1021/acs.langmuir.0c00704 ↗
15. The effect of charging rate on the graphite electrode of commercial lithium-ion cells: A post-mortem study10.1016/j.jpowsour.2016.10.002 ↗
16. The electrochemical behavior of alkali and alkaline earth metals in nonaqueous battery systems—The solid electrolyte interphase model10.1149/1.2128859 ↗
17. The state of understanding of the lithium-ion-battery graphite solid electrolyte interphase (SEI) and its relationship to formation cycling10.1016/j.carbon.2016.04.008 ↗
18. In situ investigation of the electrochemical reduction of carbonate electrolyte solutions at graphite electrodes10.1149/1.1838420 ↗
19. Oxidative electrolyte solvent degradation in lithium-ion batteries: An in situ differential electrochemical mass spectrometry investigation10.1149/1.1391829 ↗
20. In situ neutron radiography of lithium-ion batteries during charge/discharge cycling10.1016/S0378-7753(01)00706-6 ↗
21. Modeling of lithium plating induced aging of lithium-ion batteries: Transition from linear to nonlinear aging10.1016/j.jpowsour.2017.05.110 ↗
22. Review on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries10.1038/s41524-018-0064-0 ↗
23. Dennis · 2016
24. A process model for the electrolyte filling of lithium-ion batteries10.1016/j.procir.2015.12.044 ↗
25. Knoche · 2018
26. Assessment of the wettability of porous electrodes for lithium-ion batteries10.1023/B:JACH.0000035599.56679.15 ↗
27. Influence of separator material on infiltration rate and wetting behavior of lithium–Ion batteries
28. Effect of electrode compression on the wettability of lithium-ion batteries10.1016/j.jpowsour.2014.04.127 ↗
29. Lattice Boltzmann simulation for electrolyte transport in porous electrode of lithium ion batteries10.1149/2.017306jes ↗
30. Improving wettability and preventing Li-ion batteries from thermal runaway using microchannels10.1016/j.ijheatmasstransfer.2017.11.063 ↗
31. Understanding electrolyte infilling of lithium ion batteries10.1149/1945-7111/ab9bfd ↗
32. Numerical investigation into a liquid displacing a gas in thin porous layers10.1002/pamm.201610291 ↗
33. Modelling the filling process of lithium-ion batteries10.1002/pamm.201710298 ↗
34. Rapid electrolyte wetting of lithium-ion batteries containing laser structured electrodes: in situ visualization by neutron radiography
35. Production of large-area lithium-ion cells – preconditioning, cell stacking and quality assurance10.1016/j.cirp.2012.03.101 ↗
36. Python–based scikit–learn machine learning models for thermal and electrical performance prediction of high–capacity lithium–ion battery
37. What are batteries, fuel cells, and supercapacitors?10.1021/cr020730k ↗
38. In situ visualization of the electrolyte solvent filling process by neutron radiography10.1016/j.jpowsour.2016.09.037 ↗
39. Ueber das zeitgesetz des kapillaren aufstiegs von flüssigkeiten10.1007/BF01461107 ↗
40. The dynamics of capillary flow10.1103/PhysRev.17.273 ↗
41. Visualization of electrolyte filling process and influence of vacuum during filling for hard case prismatic lithium ion cells by neutron imaging to optimize the production process10.1016/j.jpowsour.2018.01.081 ↗
42. Introduction to electrochemical impedance spectroscopy as a measurement method for the wetting degree of lithium-ion cells10.1149/2.0081814jes ↗
43. Evaluation of the wetting time of porous electrodes in electrolytic solutions containing ionic liquid10.1007/s10800-013-0558-x ↗
44. An analytic solution of capillary rise restrained by gravity10.1016/j.jcis.2008.01.009 ↗
45. Fries · 2010
46. III. An essay on the cohesion of fluids
47. Laplace · 1806
48. Capillary driven flow in circular cylindrical tubes10.1063/1.1596913 ↗
49. Flow development in the hydrodynamic entrance region of tubes and ducts10.1063/1.1711204 ↗
50. Siegert · 1964
51. Influence of the electrolyte quantity on lithium-ion cells10.1149/2.0121910jes ↗
52. Characterising the structural properties of polymer separators for lithium-ion batteries in 3D using phase contrast X-ray microscopy10.1016/j.jpowsour.2016.09.132 ↗
53. ANTARES: Cold neutron radiography and tomography facility
54. Influence of the cell format on the electrolyte filling process of lithium–Ion cells
55. Research and demonstration center for the production of large-area lithium-ion cells
56. How neutrons facilitate research into gas turbines and batteries from development to engineering applications10.1134/S1027451020070162 ↗
57. Neutron scattering lengths and cross sections10.1080/10448639208218770 ↗
58. New design for the ANTARES-II facility for neutron imaging at FRM II10.1016/j.nima.2009.01.192 ↗
59. A threshold selection method from gray-level histograms10.1109/TSMC.1979.4310076 ↗
60. Lithium-ion batteries – current state of the art and anticipated developments10.1016/j.jpowsour.2020.228708 ↗
61. Effective ionic resistance in battery separators10.1149/06901.0135ecst ↗
62. Deutsches Institut für Normung e. V. · 2016
63. Kinetic aspects of HF generation in a LiPF6 based electrolyte solution
64. Thermal stability of fluoroethylene carbonate (FEC) containing electrolytes using LiPF6 as conductive salt10.1149/MA2018-02/6/456 ↗