journal article·2020-09

Artificial interface stabilized LiNi0.80Co0.15Al0.05O2@Polysiloxane cathode for stable cycling lithium-ion batteries

Zi Yang, Zhimin Li, Yunxia Huang, Maolin Zhang, Chaofeng Liu, Dongyan Zhang, Guozhong Cao

Publisher page

Abstract

Abstract LiNi0.80Co0.15Al0.05O2 (NCA) as a practical cathode material for lithium-ion batteries has been attracting extensive attention owing to its superior specific capacity and small voltage hysteresis, but suffers from the serious side reactions with electrolyte and HF erosion resulting in capacity fading. A thin conformal polysiloxane with ethoxy-functional groups (EPS) is successfully grown on NCA particles through the hydrolysis-condensation method effectively suppresses the side reactions and mitigates the instability of NCA cathode. The original discharge capacities of NCA and NCA-EPS cathodes are 158 and 159 mAh g−1 at 25 °C, respectively. The capacity retention of NCA-EPS cathode is ~96% of the original capacity after 150 cycles under 1 C, 25% higher than NCA cathode. Even at 55 °C, NCA-EPS cathode could maintain ~86% of the original discharge capacity through 150 cycles, which enhances 29% compared to NCA cathode. The excellent cycling stability of NCA originates from the EPS that acts as a protective shell to reduce the trace water on the NCA surface, inhibit the side reaction and remove HF from the electrolyte through a nucleophilic substitution reaction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. Electrochemical energy storage for green grid10.1021/cr100290v ↗
2. Interphases, interfaces, and surfaces of active materials in rechargeable batteries and perovskite solar cells
3. Electrical energy storage for transportation-approaching the limits of, and going beyond, lithium-ion batteries10.1039/c2ee21892e ↗
4. Energy storage: the future enabled by nanomaterials10.1126/science.aan8285 ↗
5. Boosting cell performance of LiNi0.8Co0.15Al0.05O2 via surface structure design10.1002/smll.201904854 ↗
6. LiNi0.8Co0.15Al0.05O2 cathodes exhibiting improved capacity retention and thermal stability due to a lithium iron phosphate coating10.1016/j.electacta.2019.04.153 ↗
7. Improving long-term cyclic performance of LiNi0.8Co0.15Al0.05O2 cathode by introducing a film forming additive10.1016/j.jelechem.2018.12.041 ↗
8. Polyanion and cation co-doping stabilized Ni-rich Ni-Co-Al material as cathode with enhanced electrochemical performance for Li-ion battery10.1016/j.nanoen.2019.06.014 ↗
9. Surface/interface structure degradation of Ni-rich layered oxide cathodes toward lithium-ion batteries: fundamental mechanisms and remedying strategies
10. Capacity fade of LiNi(1-x-y)CoxAlyO2 cathode for lithium-ion batteries during accelerated calendar and cycle life test. I. Comparison analysis between LiNi(1-x-y)CoxAlyO2 and LiCoO2 cathodes in cylindrical lithium-ion cells during long term storage test10.1016/j.jpowsour.2013.08.079 ↗
11. Electrolyte-induced surface transformation and transition-metal dissolution of fully delithiated LiNi0.8Co0.15Al0.05O210.1021/acs.langmuir.7b00863 ↗
12. Capacity-fading mechanisms of LiNiO2-based lithium-ion batteries II. Diagnostic analysis by electron microscopy and spectroscopy10.1149/1.3076137 ↗
13. Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries10.1002/anie.201409262 ↗
14. Narrowing the gap between theoretical and practical capacities in Li-ion layered oxide cathode materials10.1002/aenm.201602888 ↗
15. Atomic resolution structural and chemical imaging revealing the sequential migration of Ni, Co, and Mn upon the battery cycling of layered cathode10.1021/acs.nanolett.7b01546 ↗
16. Reaction heterogeneity in LiNi0.8Co0.15Al0.05O2 induced by surface layer10.1021/acs.chemmater.7b02236 ↗
17. Understanding the effects of a multi-functionalized additive on the cathode-electrolyte interfacial stability of Ni-rich materials10.1016/j.jpowsour.2015.10.051 ↗
18. The effect of Co3O4 & LiCoO2 cladding layer on the high rate and storage property of high nickel material LiNi0.8Co0.15Al0.05O2 by simple one-step wet coating method10.1016/j.electacta.2017.07.015 ↗
19. Nasicon-type surface functional modification in core-shell LiNi0.5Mn0.3Co0.2O2@NaTi2(PO4)3 cathode enhances its high-voltage cycling stability and rate capacity toward Li-ion batteries10.1021/acsami.7b15808 ↗
20. SiO2 coated LiNi0.915Co0.075Al0.01O2 cathode material for rechargeable Li-ion batteries10.1039/C6NR07438C ↗
21. Cycling performance of lithium-ion polymer cells assembled with a cross-linked composite polymer electrolyte using a fibrous polyacrylonitrile membrane and vinyl-functionalized SiO2 nanoparticles10.1039/C5TA01436K ↗
22. Structure and electrochemical performance of TiO2-coated LiNi0.80Co0.15Al0.05O2 cathode material10.1016/j.matlet.2014.12.093 ↗
23. Enhancing the thermal and upper voltage performance of Ni-Rich cathode material by a homogeneous and facile coating method: spray-drying coating with nano-Al2O310.1021/acsami.6b05629 ↗
24. Improvement of long-term cycling performance of Li[Ni0.8Co0.15Al0.05]O2 by AlF3 coating10.1016/j.jpowsour.2013.01.045 ↗
25. Improvement of electrochemical performance of Li[Ni0.8Co0.15Al0.05]O2 cathode materials by AlF3 coating at various temperatures10.1021/ie0715308 ↗
26. FeF3-coated LiNi0.8Co0.15Al0.05O2 cathode materials with improved electrochemical properties10.1016/j.matlet.2016.08.112 ↗
27. Ni3(PO4)2-coated Li[Ni0.8Co0.15Al0.05]O2 lithium battery electrode with improved cycling performance at 55 °C10.1016/j.jpowsour.2011.04.007 ↗
28. A facile process for coating amorphous FePO4 onto LiNi0.8Co0.15Al0.05O2 and the effects on its electrochemical properties10.1016/j.matlet.2014.06.002 ↗
29. Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries10.1038/s41560-018-0191-3 ↗
30. A rocking chair type all-solid-state lithium ion battery adopting Li2O-ZrO2 coated LiNi0.8Co0.15Al0.05O2 and a sulfide based electrolyte10.1016/j.jpowsour.2013.10.005 ↗
31. Enhanced elevated-temperature performance of Li(Ni0.8Co0.15Al0.05)O2 electrodes coated with Li2O-2B2O3 glass10.1016/j.electacta.2014.05.056 ↗
32. Electrochemical properties of LiNi0.8Co0.15Al0.05O2-graphene composite as cathode materials for lithium-ion batteries10.1016/j.jelechem.2012.08.005 ↗
33. Mechanical composite of LiNi0.8Co0.15Al0.05O2/Carbon nanotubes with enhanced electrochemical performance for lithium-ion batteries10.1186/s11671-017-2143-4 ↗
34. Building ultraconformal protective layers on both secondary and primary particles of layered lithium transition metal oxide cathodes10.1038/s41560-019-0387-1 ↗
35. The influence of the carbonate species on LiNi0.8Co0.15Al0.05O2 surfaces for all-solid-state lithium ion battery performance10.1016/j.jpowsour.2014.07.021 ↗
36. A highly stabilized nickel-rich cathode material by nanoscale epitaxy control for high-energy lithium-ion batteries10.1039/C8EE00155C ↗
37. Controllable solid electrolyte interphase in nickel-rich cathodes by an electrochemical rearrangement for stable lithium-ion batteries
38. Studies on preparation and chemical stability of reduced iron particles encapsulated with polysiloxane nano-films10.1016/j.matlet.2005.07.079 ↗
39. Synthesis and characterization of new polysiloxane bearing vinylic function and its application for the preparation of poly (silicone-co-acrylate)/montmorillonite nanocomposite emulsion10.1016/j.porgcoat.2010.09.015 ↗
40. Modification of polysiloxane polymers for biomedical applications: a review10.1002/pi.783 ↗
41. Sol-gel processing of silica: II. The role of the catalyst10.1016/S0022-3093(86)80078-3 ↗
42. Facile fabrication of ethoxy-functional polysiloxane wrapped LiNi0.6Co0.2Mn0.2O2 cathode with improved cycling performance for rechargeable Li-ion battery10.1021/acsami.6b04644 ↗
43. Structural and electrochemical characteristics of SiO2 modified Li4Ti5O12 as anode for lithium-ion batteries10.1016/j.jallcom.2015.03.049 ↗
44. Tetraethoxysilane as a new facilitative film-forming additive for the lithium-ion battery with LiMn2O4 cathode10.1016/j.ssi.2012.11.017 ↗
45. Construction of homogeneously Al3+ doped Ni rich Ni-Co-Mn cathode with high stable cycling performance and storage stability via scalable continuous precipitation10.1016/j.electacta.2018.08.124 ↗
46. Synthesis and characterization of high tap-density layered Li[Ni1/3Co1/3Mn1/3]O2 cathode material via hydroxide co-precipitation10.1016/j.jpowsour.2005.09.047 ↗
47. Improving the cycling stability of LiCoO2 at 4.5 V through co-modification by Mg doping and zirconium oxyfluoride coating10.1016/j.ceramint.2014.08.093 ↗
48. Effect of synthesis method on the electrochemical performance of LiNi1/3Mn1/3Co1/3O210.1016/j.jpowsour.2004.01.016 ↗
49. Synergy of doping and coating induced heterogeneous structure and concentration gradient in Ni-rich cathode for enhanced electrochemical performance10.1016/j.jpowsour.2019.03.073 ↗
50. Facile strategy of NCA cation mixing regulation and its effect on electrochemical performance
51. A comparative study on structural changes of LiCo1/3Ni1/3Mn1/3O2 and LiNi0.8Co0.15Al0.05O2 during first charge using in situ XRD10.1016/j.elecom.2006.06.005 ↗
52. Mg-Al-B co-substitution LiNi0.5Co0.2Mn0.3O2 cathode materials with improved cycling performance for lithium-ion battery under high cutoff voltage10.1016/j.electacta.2016.01.039 ↗
53. Enhancing cycle stability and storage property of LiNi0.8Co0.15Al0.05O2 by using fast cooling method10.1016/j.electacta.2016.12.138 ↗
54. Surface fluorinated LiNi0.8Co0.15Al0.05O2 as a positive electrode material for lithium ion batteries10.1039/C5TA02529J ↗
55. Optimization of Ni2+/Ni3+ ratio in layered Li(Ni, Mn, Co)O2 cathodes for better electrochemistry10.1016/j.jpowsour.2007.06.051 ↗
56. Polyimide encapsulated lithium-rich cathode material for high voltage lithium-ion battery10.1021/am504796n ↗
57. Origin of structural evolution in capacity degradation for overcharged NMC622 via operando coupled investigation10.1021/acsami.7b06326 ↗
58. Interfacial origin of performance improvement and fade for 4.6 V LiNi0.5Co0.2Mn0.3O2 battery cathodes10.1021/jp501670g ↗
59. Enhanced electrochemical performance and thermal stability of a CePO4-coated Li1.2Ni0.13Co0.13Mn0.54O2 cathode material for lithium-ion batteries10.1039/C4RA11370E ↗
60. Synthesis of Li2MnO3-stabilized LiCoO2 cathode material by spray-drying method and its high-voltage performance10.1016/j.jallcom.2014.12.038 ↗
61. The influence of temperature on a nutty-cake structural material: LiMn1-xFexPO4 composite with LiFePO4 core and carbon outer layer for lithium-ion battery10.1016/j.jpowsour.2013.06.148 ↗
62. A hydrolysis-hydrothermal route for the synthesis of ultrathin LiAlO2-inlaid LiNi0.5Co0.2Mn0.3O2 as a high-performance cathode material for lithium ion batteries10.1039/C4TA05902F ↗
63. Effects of lithium excess and SnO2 surface coating on the electrochemical performance of LiNi0.8Co0.15Al0.05O2 cathode material for Li-ion batteries10.1016/j.jallcom.2019.02.127 ↗
64. The role of a MnO2 functional layer on the surface of Ni-rich cathode materials: towards enhanced chemical stability on exposure to air10.1016/j.ceramint.2018.04.166 ↗
65. Highly enhanced electrochemical performances of LiNi0.815Co0.15Al0.035O2 by coating via conductively LiTiO2 for lithium-ion batteries10.1016/j.ceramint.2019.06.055 ↗
66. Role of V2O5 coating on LiNiO2-based materials for lithium ion battery10.1016/j.jpowsour.2013.06.133 ↗
67. Enhanced electrochemical performance of LiNi0.8Co0.1Mn0.1O2 with lithium-reactive Li3VO4 coating10.1016/j.jallcom.2017.02.224 ↗
68. Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x= 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries10.1016/j.jpowsour.2013.01.063 ↗
69. Identifying rate limitation and a guide to design of fast-charging Li-ion battery
70. Observation of microstructural evolution in Li battery cathode oxide particles by in situ electron microscopy10.1002/aenm.201300015 ↗
71. A new coating method for alleviating surface degradation of LiNi0.6Co0.2Mn0.2O2 cathode material: nanoscale surface treatment of primary particles10.1021/acs.nanolett.5b00045 ↗
72. Inter-granular cracking as a major cause of long-term capacity fading of layered cathodes10.1021/acs.nanolett.7b00379 ↗
73. Capacity fade of LiAlyNi1-x-yCoxO2 cathode for lithium-ion batteries during accelerated calendar and cycle life tests (surface analysis of LiAlyNi1-x-yCoxO2 cathode after cycle tests in restricted depth of discharge ranges)10.1016/j.jpowsour.2014.02.018 ↗
74. Fluorine functionalization of epitaxial graphene for uniform deposition of thin high-κ dielectrics10.1016/j.carbon.2012.01.050 ↗
75. Roles of oxygen and interfacial stabilization in enhancing the cycling ability of silicon oxide anodes for rechargeable lithium batteries10.1149/2.118306jes ↗
76. A comparative XPS surface study of Li2FeSiO4/C cycled with LiTFSI-and LiPF6-based electrolytes10.1039/B813099J ↗
77. Lithium-ion batteries: thermal reactions of electrolyte with the surface of metal oxide cathode particles10.1149/1.2210588 ↗