journal article·2017-12

Co/Ti co-substituted layered LiNiO2 prepared using a concentration gradient method as an effective cathode material for Li-ion batteries

Hyoung Shin Ko, Jea Han Kim, Juan Wang, Jong Dae Lee

Publisher page

Abstract

Abstract The design of Li-ion batteries with high energy storage capacities and efficiencies is a subject of increased research interest, being of key importance for their large-scale applications and further commercialization. However, conventional Li-ion batteries are expensive and have stability-related concerns, which limit their practical applications. In our search for cheaper and safer Li-ion batteries, we use a concentration gradient method to prepare LiNi0.9Co0.1–xTixO2 (0.02 ≤ x ≤ 0.05) cathode materials surface-enriched with Co and Ti that exhibit decreased oxygen loss and improved structural stability. The corresponding crystal structures and morphologies are analyzed by X-ray diffraction and field emission scanning electron microscopy, with the Ni, Co, and Ti concentration distributions determined by energy-dispersive X-ray spectroscopy. The material with the best performance (x = 0.04) exhibits a discharge capacity of 214 mAh g−1 in a charge/discharge voltage range of 3.0–4.3 V (vs. Li/Li+), and possesses an excellent 50-cycle capacity retention of 98.7%. Thermogravimetric analysis shows that partial substitution of Ni with the strongly oxophilic Ti solves the problem of oxygen loss observed in Ni-rich cathode materials such as LiNiO2.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. Rechargeable LiNiO2/carbon cells10.1149/1.2085950 ↗
3. Optimization of the composition of the Li1−zNi1+z O2 electrode materials: structural, magnetic, and electrochemical studies10.1149/1.1836614 ↗
4. Ageing mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.01.006 ↗
5. Degradation analysis of a Ni-based layered positive-electrode active material cycled at elevated temperatures studied by scanning transmission electron microscopy and electron energy-loss spectroscopy10.1016/j.jpowsour.2011.05.017 ↗
6. Electrochemistry and structural chemistry of LiNiO2(R3¯m) for 4 volt secondary lithium cells10.1149/1.2220730 ↗
7. Layered lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for lithium-ion batteries10.1246/cl.2001.642 ↗
8. Synthetic optimization of Li[Ni1/3Co1/3Mn1/3]O2 via co-precipitation10.1016/j.electacta.2004.07.038 ↗
9. Aluminum-doped lithium nickel cobalt oxide electrodes for high-power lithium-ion batteries10.1016/j.jpowsour.2003.10.009 ↗
10. Performance of LiNiCoO2 materials for advanced lithium-ion batteries10.1016/j.jpowsour.2005.03.091 ↗
11. The effect of tetravalent titanium substitution in LiNi1−xTixO2 (0.025 ≤ x ≤ 0.2) system10.1016/S1388-2481(00)00151-X ↗
12. A comparative study on the substitution of divalent, trivalent and tetravalent metal ions in LiNi1−xMxO2 (M = Cu2+, Al3+ and Ti4+)10.1016/S0378-7753(01)00900-4 ↗
13. Structural, electrochemical and thermal properties of LiNi0.8−yTiyCo0.2O2 as cathode materials for lithium ion battery10.1016/j.electacta.2003.11.001 ↗
14. LiNi0.8Co0.2-xTixO2 nanoparticles: synthesis, structure, and evaluation of electrochemical properties for lithium ion cell application10.1007/s10008-007-0320-6 ↗
15. High-energy cathode material for long-life and safe lithium batteries10.1038/nmat2418 ↗
16. A novel cathode material with a concentration-gradient for high-energy and safe lithium-ion batteries10.1002/adfm.200901730 ↗
17. A novel concentration-gradient Li[Ni0.83Co0.07Mn0.10]O2 cathode material for high-energy lithium-ion batteries10.1039/c0jm04242k ↗
18. Nanostructured high-energy cathode materials for advanced lithium batteries10.1038/nmat3435 ↗
19. Physicochemical and electrochemical characterization of anatase titanium dioxide nanoparticles10.1016/j.jpowsour.2004.11.056 ↗
20. Elaboration and characterization of TiO2 nanoparticles incorporated in SiO2 host matrix10.1016/j.jpcs.2006.01.116 ↗
21. Solid-state chemistry and electrochemistry of LiCo1/3Ni1/3Mn1/3O2 for advanced lithium-ion batteries II. Preparation and characterization10.1149/1.1924227 ↗
22. Nanoarchitecture multi-structural cathode materials for high capacity lithium batteries10.1002/adfm.201200536 ↗
23. Synthesis of LiNi0.5Mn0.5-xTixO2 by an emulsion drying method and effect of Ti on structure and electrochemical properties10.1021/cm050033j ↗
24. Spinel-layered core-shell cathode materials for Li-ion batteries10.1002/aenm.201100239 ↗
25. Fundamental degradation mechanisms of layered oxide Li-ion battery cathode materials: methodology, insights and novel approaches10.1016/j.mseb.2014.11.014 ↗
26. Microstructural study on degradation mechanism of layered LiNi0.6Co0.2Mn0.2O2 cathode materials by analytical transmission electron microscopy10.1016/j.jpowsour.2016.01.023 ↗
27. Improved cyclic stability of LiNi0.8Co0.1Mn0.1O2 via Ti substitution with a cut-off potential of 4.5 V10.1016/j.ceramint.2015.02.026 ↗
28. Understanding the degradation mechanisms of LiNi0.5Co0.2Mn0.3O2 cathode material in lithium ion batteries10.1002/aenm.201300787 ↗
29. In situ x-ray diffraction and electrochemical studies of Li1–xNiO210.1016/0167-2738(93)90317-V ↗
30. The LiNiO2/carbon lithium-ion battery10.1016/0167-2738(94)90413-8 ↗