journal article·2017-04

Improving the performance of microbial fuel cells by reducing the inherent resistivity of carbon fiber brush anodes

Yang'en Xie, Zhaokun Ma, Huaihe Song, Huiyao Wang, Pei Xu

Publisher page

Abstract

Abstract This study investigated the effect of carbon fibers as brush anode materials on the performance of microbial fuel cells (MFCs). Two types of carbon fibers with different electrical resistivity and functionality – polyacrylonitrile (PAN) ( ρ : 28.0 μΩ m) and pitch ( ρ : 2.05 μΩ m) were investigated. X-ray photoelectron spectroscopy analysis showed that the PAN- and pitch-based carbon fibers presented almost the same surface elements and functional groups, and there was no significant difference in microbial growth on the brush anodes. Current interrupt and steady discharging methods demonstrated the pitch-based carbon brush anodes had lower ohmic resistance and generated higher power density. After nitric acid treatment, the power density generated by the PAN- and pitch-based anodes increased by 29.3% and 26.7%, achieving 816 and 895 mW m −2 , respectively. Using pitch-based carbon fiber brush as anode attained better performance than the widely used PAN-based carbon brush. The acid treated pitch-based carbon fibers provide a promising alternative to highly efficient anode materials for the extensive application of MFCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microbial Fuel Cells and Bioremediation · Electrochemical sensors and biosensors · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Microbial fuel cells methodology and technology10.1021/es0605016 ↗
2. Assessment of microbial fuel cell configurations and power densities10.1021/acs.estlett.5b00180 ↗
3. An overview of electrode materials in microbial fuel cells10.1016/j.jpowsour.2011.01.012 ↗
4. The effect of nitric acid, ethylenediamine and diethanolamine modified polyaniline nanoparticles anode electrode in a microbial fuel cell10.1016/j.ijhydene.2012.12.016 ↗
5. Performance of non-porous graphite and titanium-based anodes in microbial fuel cells10.1016/j.electacta.2008.03.032 ↗
6. Ammonia treatment of carbon cloth anodes to enhance power generation of microbial fuel cells10.1016/j.elecom.2006.10.023 ↗
7. Electricity generation and microbial community analysis of alcohol powered microbial fuel cells10.1016/j.biortech.2006.09.036 ↗
8. Animal carcass wastewater treatment and bioelectricity generation in up-flow tubular microbial fuel cells: effects of HRT and non-precious metallic catalyst10.1016/j.biortech.2012.10.053 ↗
9. Graphite fiber brush anodes for increased power production in air-cathode microbial fuel cells10.1021/es062644y ↗
10. Effect of anode construction on performance of microbial fuel cells
11. Enhancing power generation of scale-up microbial fuel cells by optimizing the leading-out terminal of anode10.1016/j.jpowsour.2013.10.014 ↗
12. Nanomodification of the electrodes in microbial fuel cell: impact of nanoparticle density on electricity production and microbial community10.1016/j.apenergy.2013.11.058 ↗
13. Surface area expansion of electrodes with grass-like nanostructures and gold nanoparticles to enhance electricity generation in microbial fuel cells10.1016/j.biortech.2012.07.048 ↗
14. Increased performance of single-chamber microbial fuel cells using an improved cathode structure10.1016/j.elecom.2006.01.010 ↗
15. Increased power generation in a continuous flow MFC with advective flow through the porous anode and reduced electrode spacing10.1021/es051652w ↗
16. Biomass examination by lipid p method for drinking water bio treatment
17. Composition and distribution of internal resistance in three types of microbial fuel cells10.1007/s00253-007-1193-4 ↗
18. The use of nylon and glass fiber filter separators with different pore sizes in air-cathode single-chamber microbial fuel cells10.1039/b927151a ↗
19. Improved performance of membrane free single-chamber air-cathode microbial fuel cells with nitric acid and ethylenediamine surface modified activated carbon fiber felt anodes10.1016/j.biortech.2010.06.046 ↗
20. Enhanced performances of microbial fuel cells using surface-modified carbon cloth anodes a comparative study10.1016/j.ijhydene.2014.09.067 ↗
21. Enhanced electricity generation for microbial fuel cell by using electrochemical oxidation to modify carbon cloth anode10.1016/j.jpowsour.2014.04.005 ↗
22. Anode modification by electrochemical oxidation: a new practical method to improve the performance of microbial fuel cells10.1016/j.bej.2011.10.014 ↗
23. Application of modified carbon anodes in microbial fuel cells10.1205/psep07018 ↗
24. Ammonia treatment of carbon cloth anodes to enhance power generation of microbial fuel cells10.1016/j.elecom.2006.10.023 ↗
25. Treatment of carbon fiber brush anodes for improving power generation in air–cathode microbial fuel cells10.1016/j.jpowsour.2009.10.030 ↗
26. Enhanced electricity generation for microbial fuel cell by using electrochemical oxidation to modify carbon cloth anode10.1016/j.jpowsour.2014.04.005 ↗
27. Larminie · 2000
28. One-step electrosynthesis of polypyrrole/graphene oxide composites for microbial fuel cell application10.1016/j.electacta.2013.08.022 ↗
29. In-situ modified carbon cloth with polyaniline/graphene as anode to enhance performance of microbial fuel cell10.1016/j.ijhydene.2016.05.048 ↗
30. Graphene/carbon cloth anode for high-performance mediatorless microbial fuel cells10.1016/j.biortech.2012.02.116 ↗
31. Microbial electrochemical systems and technologies: it is time to report the capital costs10.1021/acs.est.6b01601 ↗