journal article·2011-09

Single solid oxide fuel cell modeling and optimization

H. Wen, J.C. Ordonez, J.V.C. Vargas

Journal of Power Sources· Volume 196· Issue 18
Publisher page

Abstract

Abstract In this paper a dynamic model of a single solid oxide fuel cell (SOFC) is developed using a volume element methodology. It consists of a set of algebraic and ordinary differential equations derived from physical laws (e.g., the first law of thermodynamics, Fick's law, and Fourier's law), which allow for the prediction of the temperature and pressure spatial distribution inside the single SOFC, as functions of geometric and operating parameters. The thermodynamic model is coupled with an electrochemical model that is capable of determining the voltage, current, and power output. Based on the simulation results, the internal configuration (structure of the positive electrode–electrolyte–negative electrode assembly) and the operating conditions (air stoichiometric ratio and fuel utilization factor), as well as their impact on the performance of the single SOFC are discussed. Optimal geometric and operating parameters are obtained so that electrical power of the single SOFC at the nominal operating point is maximized. The method used is general and the fundamental optimization results are sharp, showing up to a 357% single SOFC performance variation within the studied parameters’ range, therefore these findings show the potential to use the model as a tool for future SOFC design, simulation and optimization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Sorrentino · J. Power Sources · 2008 · 180 · 38010.1016/j.jpowsour.2008.02.021 ↗
2. Virkar · Solid State Ionics · 2000 · 131 · 18910.1016/S0167-2738(00)00633-0 ↗
3. Chan · J. Power Sources · 2001 · 93 · 13010.1016/S0378-7753(00)00556-5 ↗
4. Sorrentino · 2004
5. Vargas · Int. J. Heat Mass Transf. · 2004 · 47 · 417710.1016/j.ijheatmasstransfer.2004.05.004 ↗
6. Martins · Appl. Therm. Eng. · 2009 · 29 · 303610.1016/j.applthermaleng.2009.04.002 ↗
7. Vargas · Int. J. Heat Mass Transf. · 2005 · 48 · 441010.1016/j.ijheatmasstransfer.2005.05.009 ↗
8. Ordonez · Int. J. Energy Res. · 2007 · 31 · 133710.1002/er.1307 ↗
9. Young · Annu. Rev. Fluid Mech. · 2007 · 39 · 19310.1146/annurev.fluid.39.050905.110304 ↗
10. Ma · J. Fuel Cell Sci. Technol. · 2005 · 2 · 24610.1115/1.2039958 ↗
11. Bove · J. Power Sources · 2006 · 159 · 54310.1016/j.jpowsour.2005.11.045 ↗
12. Janardhanan · J. Power Sources · 2006 · 162 · 119210.1016/j.jpowsour.2006.08.017 ↗
13. Janardhanan · J. Power Sources · 2008 · 178 · 36810.1016/j.jpowsour.2007.11.083 ↗
14. Bejan · 1993
15. Laminar Flow Forced Convection in Ducts
16. Bejan · 1995
17. Bejan · 1997
18. Kim · J. Electrochem. Soc. · 1999 · 146 · 6910.1149/1.1391566 ↗
19. Aguiar · J. Power Sources · 2004 · 138 · 12010.1016/j.jpowsour.2004.06.040 ↗
20. Reid · 1988
21. Tanner · J. Electrochem. Soc. · 1997 · 144 · 2110.1149/1.1837360 ↗
22. Chan · J. Electrochem. Soc. · 2001 · 148 · A38810.1149/1.1357174 ↗
23. Bard · 2001
24. Kincaid · 1991
25. Tu · J. Power Sources · 2004 · 127 · 28410.1016/j.jpowsour.2003.09.025 ↗
26. Nam · Electrochim. Acta · 2006 · 51 · 344610.1016/j.electacta.2005.09.041 ↗