journal article·2011-12

Enhanced test methods to characterise automotive battery cells

Grietus Mulder, Noshin Omar, Stijn Pauwels, Filip Leemans, Bavo Verbrugge, Wouter De Nijs, Peter Van den Bossche, Daan Six, Joeri Van Mierlo

Journal of Power Sources· Volume 196· Issue 23
Publisher page

Abstract

Abstract This article evaluates the methods to characterise the behaviour of lithium ion cells of several chemistries and a nickel metal hydride cell for automotive applications like (plug-in) hybrid vehicles and battery electric vehicles. Although existing characterisation test methods are used, it was also indicated to combine test methods in order to speed up the test time and to create an improved comparability of the test results. Also, the existing capacity tests ignore that cells can be charged at several current rates. However, this is of interest for, e.g. fast charging and regenerative braking. Tests for high power and high energy application have been integrated in the enhanced method. The article explains the rationale to ameliorate the test methods. The test plan should make it possible to make an initial division in a group of cells purchased from several suppliers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Electric and Hybrid Vehicle Technologies · Electric Vehicles and Infrastructure

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. S. Pauwels, ESto project description, Electric & Hybrid Vehicle Technology International, July, submitted for publication.
2. Draft ISO/DIS 12405-1. Electrically propelled road vehicles–test specification for lithium-ion traction battery systems: high power applications (draft under vote, 2010), ISO, Switzerland, 2009, http://www.flandersdrive.be/energy-storage.
3. Assessment of performance characteristics of lithium-ion batteries for PHEV vehicles applications based on a newly test methodology
4. Evaluation of performance characteristics of various lithium-ion batteries for use in BEV application
5. Assessment of performance of lithium iron phosphate oxide, nickel manganese cobalt oxide and nickel cobalt aluminum oxide based cells for using in plug-in battery electric
6. Rapid test and non-linear model characterization of solid-state lithium batteries10.1016/j.jpowsour.2003.12.001 ↗
7. PSOC cycle testing method for lithium-ion secondary batteries10.1016/S0378-7753(03)00157-5 ↗
8. Performance characteristics of lithium-ion batteries of various chemistries for plug-in hybrid vehicles
9. Testing of lithium-ion 18650 cells and characterizing/predicting cell performance10.1016/S0378-7753(98)00238-9 ↗
10. Performance of phosphate lithium-ion batteries in motive applications
11. Life verification of large capacity Yardney Li-ion cells and batteries in support of NASA missions10.1002/er.1653 ↗
12. Experimental characterization of hybrid power systems under pulse current loads10.1016/S0378-7753(02)00044-7 ↗
13. Draft IEC 62660-1. Secondary batteries for electric road vehicles—performance testing for lithium-ion cells (draft under vote, 2010).
14. Draft ISO/DIS 12405-2. Electrically propelled road vehicles–test specification for lithium-ion traction battery systems: high energy application (draft under vote, 2010), ISO, Switzerland, 2009.
15. IEC 61982-2:2002. Secondary batteries for the propulsion of electric vehicles—Part 2. Dynamic discharge performance test and dynamic endurance test, IEC, Switzerland, 2002.
16. FreedomCAR battery test manual for power assist hybrid electric vehicles, U.S. Department of Energy, U.S.A., 2003.
17. Battery test manual for plug-in hybrid electric vehicles, U.S. Department of Energy, U.S.A, 2008.
18. Appendix D in: FreedomCAR battery test manual for power assist hybrid electric vehicles, U.S. Department of Energy, U.S.A., 2003.
19. Josse · 2006
20. Batteries–Fast Charging10.1016/B978-044452745-5.00368-3 ↗