article·2013-03-16

Effects of a dopant on the electrochemical properties of Li4Ti5O12 as a lithium-ion battery anode material

Jung Soo Park, Seong‐Ho Baek, Yong-il Jeong, Bum-Young Noh, Jae Hyun Kim

Publisher page

Abstract

Abstract Li 4 Ti 5 O 12 and Al 3+ doped Li (4− x /3) Al x Ti (5−2 x /3) O 12 ( x = 0, 0.01, 0.05, 0.1, 0.15, 0.2) are synthesized at 750, 850, 950 °C via solid state reaction using TiO 2 -rutile, Li 2 CO 3 and Al 2 O 3 as precursors. The samples at 850, 950 °C have better phase purity than those at 750 °C. The preliminary charge–discharge cycling test of undoped and Al 3+ doped Li 4 Ti 5 O 12 reveals that the electrochemical performance of the electrode prepared at 850 °C is better than that at 750, 950 °C. Therefore, the optimum calcination temperature is found to be 850 °C. Li (4− x /3) Al x Ti (5−2 x /3) O 12 ( x = 0.01, 0.05, 0.1), which is the low Al-doped sample, exhibits a higher discharge capacity and rate performance than the high Al-doped Li 4 Ti 5 O 12 ( x = 0.15, 0.2) sample. The first discharge capacities at 0.2, 0.5, and 1 C are 174.4, 161.9, and 153.8 mAh g −1 , respectively for Li (4− x /3) Al x Ti (5−2 x /3) O 12 ( x = 0.1). These values are similar to those of Li (4− x /3) Al x Ti (5−2 x /3) O 12 ( x = 0.01, 0.05). The capacity retention ratio of Li (4− x /3) Al x Ti (5−2 x /3) O 12 ( x = 0.01, 0.05, 0.1) is over 99.3% after 30 cycles. The capacity increase and good rate performance in the optimum Al-doped Li 4 Ti 5 O 12 are discussed in relation to the stability of the spinel structure and the resulting ease of lithium insertion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.