Sulfur – induced embrittlement in high-purity, polycrystalline copper
Source abstract
Abstract
Abstract Tensile tests were carried out in high-purity, polycrystalline copper alloys with three concentrations of sulfur impurities (14, 27 and 7920 at ppm) at temperatures between 20 °C and 400 °C. The ductility drops with increasing sulfur concentration and temperature while the ultimate tensile strength increases. The alloys exhibit a grain size of several millimeters and contain mostly random grain boundaries (GBs). The microstructure and composition is investigated by transmission electron microscopy (TEM) and atom probe tomography (APT). The microstructure of the samples with sulfur contents of 14 and 27 ppm consists of globular grains and neither of the microanalytical techniques employed reveals the formation of Cu-sulfides or sulfur segregation to GBs. Even after annealing at 500 °C, no sulfide formation or sulfur segregation to GBs was detected. In the alloy with a sulfur content of 7920 ppm, a dendritic structure is observed and in the interdendritic region monoclinic Cu2S precipitates with a size range from 5 nm to several μm are observed at GBs and also within the grains. The influence of S on the ductility is discussed considering the TEM and APT results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Temperature dependent transition of intragranular plastic to intergranular brittle failure in electrodeposited Cu micro-tensile samples10.1016/j.msea.2014.09.029 ↗
2. Ductility of ultra high purity copper
3. On the dynamic embrittlement of copper-chromium alloys by sulphur10.1023/A:1004839825660 ↗
4. Sulfur segregation at α-iron grain boundaries—II10.1016/0001-6160(60)90106-1 ↗
5. C.L. Briant, S.K. Banerji, Tempered martensite embrittlement and intergranular fracture in an ultra-high strength sulfur doped steel, Metall. Trans. A. 12 (n.d.) 309–319. https://doi.org/10.1007/BF02655204.10.1007/BF02655204 ↗
6. Lejcek · 2010
7. Low temperature creep ductility of OFHC copper10.1016/S0921-5093(97)00750-8 ↗
8. Effects of precipitates in Cu upon impact fracture: an ultra-high-vacuum study with local probe scanning auger/electron microscopy10.1016/S1359-6454(99)00458-9 ↗
9. Theoretical investigation of sulfur solubility in pure copper and dilute copper-based alloys10.1016/S1359-6454(99)00036-1 ↗
10. Sulphur diffusion in copper: departure from the Arrhenius plot10.1002/pssb.19690350240 ↗
11. Sulphur diffusion in copper: small penetration curves10.1002/pssa.19700020112 ↗
12. The Cu-S (copper-sulfur) system10.1007/BF02868665 ↗
13. Grain boundary self-diffusion in Cu polycrystals of different purity10.1016/S1359-6454(97)00037-2 ↗
14. 1990
15. The effect of impurity elements on chemical bonding at grain boundaries
16. High resolution saes and sims studies of grain boundary segregation of S and Cl in Ni10.1016/0036-9748(82)90336-2 ↗
17. Grain boundary decohesion by impurity segregation in a nickel-sulfur system10.1126/science.1104624 ↗
18. Near-simultaneous dual energy range EELS spectrum imaging10.1016/j.ultramic.2008.05.006 ↗
19. Egerton · 2011
20. In situ site-specific specimen preparation for atom probe tomography10.1016/j.ultramic.2006.06.008 ↗
21. A novel approach for site-specific atom probe specimen preparation by focused ion beam and transmission electron backscatter diffraction10.1016/j.ultramic.2014.04.003 ↗
22. Co-segregation of boron and carbon atoms at dislocations in steel10.1016/j.jallcom.2017.07.096 ↗
23. Gault · 2012
24. Larson · 2013
25. On the multiplicity of field evaporation events in atom probe: a new dimension to the analysis of mass spectra10.1080/09500830903472997 ↗
26. Atomic weights of the elements. Review 2000 (IUPAC technical report)
27. JEMS-SAAS, (n.d.). http://www.jems-saas.ch/ (accessed June 8, 2017).
28. Williams · 2008
29. Study of the L 23 edges in the 3 d transition metals and their oxides by electron-energy-loss spectroscopy with comparisons to theory10.1103/PhysRevB.26.614 ↗
30. C.H. Liebscher, C. Freysoldt, T. Dennenwaldt, T.P. Harzer, G. Dehm, Electronic structure of metastable bcc Cu–Cr alloy thin films: Comparison of electron energy-loss spectroscopy and first-principles calculations, Ultramicroscopy. (n.d.). https://doi.org/10.1016/j.ultramic.2016.07.011.10.1016/j.ultramic.2016.07.011 ↗
31. Intermediate temperature embrittlement of copper alloys10.1179/174328009X392967 ↗
32. 2011
33. Atomic-level detection by X-ray microanalysis in the analytical electron microscope10.1016/S0304-3991(99)00015-7 ↗
34. Grain boundary hardening and segregation in alpha Iron-Tin alloy10.1016/0001-6160(80)90135-2 ↗
35. Grain boundary segregation
36. Grain boundary cosegregation and diffusion in Cu (Fe, S) solid solution10.1016/0001-6160(83)90200-6 ↗
37. Experimental evidence of sulfur effect on the plane and on the extrinsic dislocations of a Σ = 3 grain boundary in nickel
38. Intergranular segregation of bismuth in copper bicrystals
39. Intergranular sulfur segregation and grain boundary plane in a nickel bicrystal
40. C:∖TYPESET∖MDPWEB∖Vol1proc.DVI - chalcocite.pdf, (n.d.). http://www.handbookofmineralogy.org/pdfs/chalcocite.pdf (accessed June 12, 2017).
41. Chalcocite Mineral Data, (n.d.). http://webmineral.com/data/Chalcocite.shtml (accessed June 12, 2017).
42. Priester · 2013
43. Growth evolution and phase transition from chalcocite to digenite in nanocrystalline copper sulfide: morphological, optical and electrical properties10.3762/bjnano.5.166 ↗