journal article·2011-03

Preparation and electrochemical performance of Pr2Ni0.6Cu0.4O4 cathode materials for intermediate-temperature solid oxide fuel cells

Yifang Wang, Jigui Cheng, Qiumei Jiang, Junfang Yang, Jianfeng Gao

Journal of Power Sources· Volume 196· Issue 6
Publisher page

Abstract

Abstract Cathode material Pr 2 Ni 0.6 Cu 0.4 O 4 (PNCO) for intermediate-temperature solid oxide fuel cells (IT-SOFCs) is synthesized by a glycine–nitrate process using Pr 6 O 11 , NiO, and CuO powders as raw materials. X-ray diffraction analysis reveals that nanosized Pr 2 Ni 0.6 Cu 0.4 O 4 powders with K 2 NiF 4 -type structure can be obtained from calcining the precursors at 1000 °C for 3 h. Scanning electron microscopy shows that the sintered PNCO samples have porous microstructure with a porosity of more than 30% and grain size smaller than 2 μm. A maximum conductivity of 130 S cm −1 is obtained from the PNCO samples sintered at 1050 °C. A single fuel cell based on the PNCO cathode with 30 μm Sm 0.2 Ce 0.8 O 1.9 (SCO) electrolyte film and a 1 mm NiO–SCO anode support is constructed. The ohmic resistance of the single Ni–SCO/SCO/PNCO cell is 0.08 Ω cm 2 and the area specific resistance (ASR) value is 0.19 Ω cm 2 at 800 °C. Cell performance was also tested using humidified hydrogen (3% H 2 O) as fuel and air as oxidant. The single cell shows an open circuit voltage of 0.82 V and 0.75 V at 700 °C and 800 °C, respectively. Maximum power density is 238 mW cm −2 and 308 mW cm −2 at 700 °C and 800 °C, respectively. The preliminary tests have shown that Pr 2 Ni 1− x Cu x O 4 materials can be a good candidate for cathode materials of IT-SOFCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Bansal Narottam · J. Power Sources · 2006 · 158 · 14810.1016/j.jpowsour.2005.09.057 ↗
2. Cacciola · J. Power Sources · 2001 · 100 · 6710.1016/S0378-7753(01)00884-9 ↗
3. Jiang · J. Power Sources · 2006 · 185 · 1
4. Yang · J. Alloys Compd. · 2008 · 450 · 40010.1016/j.jallcom.2006.10.147 ↗
5. Zhou · Electrochem. Commun. · 2009 · 11 · 8010.1016/j.elecom.2008.10.035 ↗
6. Zhao · Solid State Ionics · 2008 · 179 · 35
7. Hamedani · Mater. Sci. Eng. B: Adv. Funct. Solid-State Mater. · 2008 · 153 · 110.1016/j.mseb.2008.07.006 ↗
8. Aguadero · Solid State Ionics · 2008 · 179 · 1110.1016/j.ssi.2008.01.099 ↗
9. Wan · Solid State Ionics · 2007 · 178 · 28110.1016/j.ssi.2007.01.013 ↗
10. Zhu · Solid State Ionics · 2008 · 179 · 147010.1016/j.ssi.2008.01.031 ↗
11. Ishihara · J. Electrochem. Soc. · 1995 · 142 · 151910.1149/1.2048606 ↗
12. Tao · Electrochim. Acta · 2009 · 54 · 330910.1016/j.electacta.2008.12.048 ↗
13. Yu · Int. J. Hydrogen Energy · 2008 · 33 · 687310.1016/j.ijhydene.2008.07.066 ↗
14. Tietz · J. Power Sources · 2006 · 156 · 2010.1016/j.jpowsour.2005.08.015 ↗
15. Zhang · J. Alloys Compd. · 2009 · 395 · 32210.1016/j.jallcom.2004.11.056 ↗
16. Murray · Solid State Ionics · 2002 · 148 · 2710.1016/S0167-2738(02)00102-9 ↗